Keburukan

GEDEMA MC2 / 200

Kondisi: hampir baru (bekas), Tahun pembuatan: 2008, jam operasional: 1.120 h, Aristech control unit (similar to FANUC) Nsdpfx Aajvvl Uaoaswf Number of axes: 4 Table dimensions: 640 x 470 mm X travel: 425 mm Y travel: 300 mm Z travel: 250 mm Max. workpiece size: 800 x 600 x 250 mm U axis Weight: approx. 3,000 kg Dimensions (LxWxH): 1860 x 2050 x 2100 mm The machine consists of the following units: 1. Wire EDM machine – main unit 2. CNC control cabinet 3. Water tank + pump 4. Water chiller 5. Transformer No. 1 6. Transformer No. 2 (power supply) Very little used. Still under power.

Kondisi: baik (bekas), Max. bar passage: 36 mm Max. spindle speed: 6,300 rpm Number of spindles: 2 Control: Traub TX8i Tool Turret 1: Number of tools: 12 X-axis: 50 mm Z-axis: 50 mm Front Tool Turret: Number of tools: 7 Speeds: 150 - 3,000 rpm / 300 - 6,000 rpm Mounting diameter: 40 mm X-axis: 370 mm Z-axis: 250 mm Rear Tool Turret: Number of tools: 5 Speeds: 150 - 3,000 rpm / 300 - 6,000 rpm Mounting diameter: 40 mm X-axis: 73 mm Bar feeder: FMB Turbo 5-42 Bar length: 3,200 mm Bar diameter: 5 - 42 mm Country of origin: Germany Nwsdotrvzxspfx Aaajf Machine dimensions (LxWxH): 3,400 x 1,300 x 1,700 mm Machine weight: 4,000 kg

Kondisi: bekas, Tahun pembuatan: 2014, INDEX C200 CNC Lathe 3 Turret 2 Spindle Kontrol Fanuc: 31i-Model B Pemegang Motoris Aksial: 6 pcs Pemegang Motoris Radial: 13 pcs Pemegang Alat: 11 pcs Pemegang Boring Bar: 21 pcs Pin: 1 pcs Bushing & Sleeves Loader: Ø51/Ø46/Ø41 Bushing loader MBL baru: 2 set 2 skala optik direkondisi oleh HEIDENHAIN 1 Box Lengan Portal soket Balluff dengan berbagai sensor, saklar induksi, dan kabel Belt motoris: 6 pcs Set bushing anti-vibrasi untuk loader MBL Waktu operasi: On time: 37.946 Nodpfx Aexxm Hfsaaowf Jam hidraulik: 37.500 Waktu produksi: 26.500 Dengan MBL Bar Feeder

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Traub TNL 18-7B CNC Turning Automatic Base Machine: Dimensions: 2441 x 1396 mm Weight: 3800 kg Spindle Height Above Floor: 3800 mm Connected Load: 24 kW Main Spindle Max. Bar Capacity: 18 mm Max. Speed: 12,000 rpm Corner Speed: 5,000 rpm Travel Z: 205 mm Rapid Traverse: 40 m/min Positioning Accuracy Z: 0.001 mm Feed Force: 3000 N Spindle Nose / Short Taper: Traub short taper mount Max. Clamping Force: 1400 daN Max. Clamping Pressure: 40 bar Min. Clamping Pressure: 7.5 bar Piston Area: 40 cm² Total Cylinder Stroke: 5 mm Clamping Tube Thread: M25 x 1 Counter Spindle Workpiece Diameter: 21 mm Clamping Depth (Workpiece): 180 mm Max. Speed: 12,000 rpm Strokes: X: 120 mm | Y: -20/+40 mm | Z: 250 mm Rapid Traverse: X: 20 m/min | Y: 20 m/min | Z: 40 m/min Max. Clamping Pressure: 30 bar Min. Clamping Pressure: 10 bar Upper Tool Turret with B-Axis Number of Stations: 8 Shank Cross-section (Turning Tool): 16 x 16 mm Travel: X: 120 mm | Y: -25/+40 mm | Z: 250 mm Rapid Traverse: X: 20 m/min | Y: 20 m/min | Z: 40 m/min Tool-to-Tool Time: 0.5 sec Positioning Accuracy: X: 0.0005 mm | Y: 0.0005 mm | Z: 0.001 mm Lower Tool Turret Number of Stations: 7 + counter spindle Shank Cross-section (Turning Tool): 16 x 16 mm Travel: X: 120 mm | Y: -20/+40 mm | Z: 250 mm Rapid Traverse: X: 20 m/min | Y: 20 m/min | Z: 40 m/min Tool-to-Tool Time: 0.5 sec Positioning Accuracy: X: 0.0005 mm | Y: 0.0005 mm | Z: 0.001 mm Driven Tool System for Upper Tool Turret Number of Driven Stations: max. 8 Drive Power: 2 kW Max. Speed: 12,000 rpm Torque: 3.9 Nm Driven Tool System for Lower Tool Turret Number of Driven Stations: 7 + counter spindle Drive Power: 3.4 kW Max. Speed: 12,000 rpm Torque: 7.3 Nm Driven Tool System for Rear Unit Number of Stations: 7 Number of Powered Stations: max. 3 Pitch: 46 mm Drive Power: 2 kW Max. Speed: 7,500 rpm Torque: 4.7 Nm Drive Power: 2 kW Max. Speed: 4,000 rpm Torque: 11.8 Nm SCOPE OF SUPPLY Includes (not limited to): Nedewg Takepfx Aaaowf - Traub CNC Lathe - Tool holders, driven and static - High-pressure and band filtration system - Oil mist separator - Fire extinguishing system - Chip conveyor - Bar feeder - Operating documentation Exact scope of supply as per photo series. No guarantee for the accuracy, completeness or currency of the information provided.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, jam operasional: 9.192 h, jarak pergerakan sumbu X: 1.200 mm, jarak lintasan sumbu Y: 900 mm, jarak gerak sumbu Z: 500 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC 530, kecepatan spindel (maks.): 16.000 rpm, jumlah sumbu: 3, This 3-axis vertical machining center HERMLE C 1200 was manufactured in 2009. It features an impressive X-axis travel of 1200 mm, a Y-axis travel of 900 mm, and a Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and offers 30 tool positions. If you are looking for high-quality machining capabilities, you should consider the HERMLE C 1200 machine we offer for sale. Contact us for further details. • X axis – 1200 mm • Y axis – 900 mm • Z axis – 500 mm • Machining center C 1200 V • Heidenhain iTNC 530 CNC control • Spindle: 16,000 rpm • SK 40 tool taper • 30 tool stations • Fixed clamping table • Coolant system • Electronic thermal compensation (iTNC) with temperature sensors on the motor spindle and machine bed • Gantry design with closed rear wall for significantly improved support under torsional loads • Two axes are located in the tool, ensuring excellent mass distribution and ideal conditions for high rapid traverses and feed rates • Lead screw diameter and pitch (X and Z axes): 40 / 20 mm • Lead screw diameter and pitch (Y axis): 50 / 20 mm • Direct measuring system Nwsdsylw Stjpfx Aaaof • Resolution: 0.0001 mm • Position tolerance (Tp) on X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm • Recommended ambient temperature to maintain accuracy: 20 °C ± 1 °C • Flushing/washing system for rinsing the side work area • Display: 15" TFT color flat screen • Flexible contour programming • Part program memory • Tool diameter capacity: 80 mm • Tool diameter with free adjacent slots: 125 mm • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Maximum magazine load: 120 kg • Tool change time (chip-to-chip) according to VDI 2852: 6.5 seconds • Handheld control unit with electronic handwheel, axis direction buttons, feed control, rapid traverse, emergency stop, and enable switch • Machine hours – 11,927 h • Spindle hours – 9,192 h Additional equipment • Chip conveyor • Heidenhain touch probe • Electronic hand control module (iTNC) Technical Specification Taper Size: SK 40

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 5.446 h, kecepatan spindel (maks.): 12.000 rpm, jarak pergerakan sumbu X: 762 mm, jarak lintasan sumbu Y: 508 mm, jarak gerak sumbu Z: 508 mm, daya motor spindle: 22.000 W, beban meja: 300 kg, jumlah slot dalam magazin alat: 41, jumlah sumbu: 5, This HAAS UMC 750 5-axis machining center was manufactured in 2013. It features a spindle speed of 12,000 rpm and has a tool capacity of 41 tools, making it suitable for a variety of machining operations. The machine offers a maximum table load of 300 kg and is equipped with advanced coolant systems for efficient operation. If you are looking for high-quality machining capabilities, consider the HAAS UMC 750 universal machining center we have for sale. Contact us for more details. • Spindle Type: Inline direct drive • Tool Holder: SK40 Njdpfx Asyid Hvjaaowf • Tool Changer: SMTC • Rotary Technology: 2 axes with supporting bearing • B Axis Range: -35° to +110° • C Axis Range: 360° • Clamping Surface: Ø 630 × 500 mm • Coolant System: Standard coolant, P-Cool, through-spindle coolant (TSC) • Renishaw Probe: WIPS system with workpiece probe and tool measurement • Control Functions: 8M functions, rotation and scaling • Memory: 16 MB • HSM: High-speed machining • Rigid Tapping: Yes • Cycle Time Hours: 5,446 h • Power-On Hours: 21,246 h Technical Specification Taper Size: SK 40

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, jarak pergerakan sumbu X: 762 mm, jarak lintasan sumbu Y: 508 mm, jarak gerak sumbu Z: 508 mm, produsen pengendali: HAAS, kecepatan spindel (maks.): 12.000 rpm, daya motor spindle: 22.400 W, jumlah sumbu: 5, This 5-axis HAAS UMC-750SS vertical machining center was manufactured in 2021. Take advantage of the opportunity to purchase this HAAS UMC-750SS vertical machining center. Contact us for further information. Additional Equipment • Coolant tank – 208 liters with mobile cart • Programmable coolant pump (M-code controlled) // Programmable coolant nozzle (P-COOL) • Safe Run – collision and overload detection system • Overvoltage protection for control cabinet • Voltage fault detection module (EPFDM) • Second home button • Remote jog handle with 2 m cable (RJH-XL) • Memory lock key switch • Rotary axis scales • Top cover Machine Advantages Technical Advantages of the Machine: • Side-mounted tool changer with 30+1 tools • Through-spindle coolant (TSC): 21 bar (300 psi) high-pressure system Nodpex U Tizjfx Aaaowf • Wireless intuitive probing system (WIPS) • Tool breakage detection (BTD) Additional Information: Media display via M130 (images, videos, PDF on screen) Standard machine memory: 1 GB Control unit: 15" color LCD monitor with USB port Touchscreen control interface Ethernet interface HaasConnect remote monitoring HaasDrop wireless file transfer WiFi connectivity High-speed machining (HSM) control Rigid tapping Dynamic work offsets / Tool Center Point Control (DWO/TCPC) Macro programming, coordinate rotation, and scaling Technical Specification Through-spindle coolant: Yes

Tahun pembuatan: 1996, Kondisi: siap digunakan (bekas), Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4000 rpm, main spindle/sub-spindle power: 18.5 kW / 11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4150 mm / 2000 mm / 1800 mm, weight: approx. 4750 kg, control: Traub System TX 8F, operating hours: 78,825 h. Documentation available. Inspection on site possible. Nedpfev Scrhex Aaaswf

Kondisi: bekas, Tahun pembuatan: 2002, Max. turning diameter: 420 mm Turning length: 1,250 mm CNC Control: INDEX, C 200-4 D Swing diameter: 630 mm Travel X1: 320 mm Travel Z1: 1,250 mm Travel X2: 170 mm Travel Z2: 1,250 mm Travel X3: 320 mm Travel Z3: 1,250 mm Max. main spindle speed: 3,000 rpm Main spindle drive: 53 kW Spindle bore: 102 mm Spindle nose: DIN 55026 size 11 Spindle torque: 675 Nm Counter spindle - max. spindle speed: 3,000 rpm Counter spindle drive: 53 kW Counter spindle - spindle bore: 102 mm Counter spindle - spindle nose: DIN 55026 size 11 Counter spindle - torque: 675 Nm Counter spindle travel: 1,250 mm Feed force X1: 14,000 N / Z1: 14,000 N Rapid traverse X1: 20 m/min / Z1: 40 m/min Feed force X2: 8,600 N / Z2: 14,000 N Nedpfx Aet U R Hzsaaewf Rapid traverse X2: 20 m/min / Z2: 40 m/min Feed force X3: 14,000 N / Z3: 14,000 N Rapid traverse X3: 20 m/min / Z3: 40 m/min Number of turret positions, Turret 1 = 12 Number of turret positions, Turret 2 = 10 Number of turret positions, Turret 3 = 12 Number of driven tool stations: 12 / 10 / 12 Max. driven tool speed: 6,000 rpm Torque (driven tools): 36 / 21 / 36 Nm Tool shank DIN 69880 Tool holder Ø 40 x 63 mm Total connected load: 120 kW Machine weight approx.: 19 t Machine dimensions (L x W x H): 5.77 x 2.47 x 2.62 m Accessories: - HAINBUCH segmented collet chuck on main spindle - HAINBUCH collet chuck, SPANNTOP SP on counter spindle - Various tool holders (including for driven tools) - Chip conveyor - Coolant system Note: All three tool turrets are prepared for through-tool coolant (IKZ), however, the high-pressure system is not included with the machine.

Kondisi: bekas, Tahun pembuatan: 2003, verfahrweg-x-1200-mm-hermle-c1200v Nwjdex E Dr Iopfx Aaaef