Termoforming vakum / deep-drawing

GEISS T7

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Mesin DU 1500 x 1000 x 620 T7 No. 98 15254 Ukuran pelat: 1000 x 800 mm Kedalaman tarik: 620 mm Tahun pembuatan: 1998 Arus nominal: 238 A Daya terpasang: 164,5 kW Sistem kontrol: Siemens OP 37 Perlengkapan: • Mesin pengisi • 6 kipas pendingin • Punch atas • Kontrol kelenturan film • Bingkai penjepit yang dapat disesuaikan secara motorik • Flash emitter • Pirometer pemanas • Pirometer pendingin Lhsdexmgvcopfx Al Nji

Tahun pembuatan: 1993, Kondisi: baik (bekas), nomor mesin/kendaraan: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine no.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feeding for 2 workpieces, in good condition Lhsdpjcc D Ddsfx Al Nji Tensile force: 10,000 kg Broaching length: 1,000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Pull head mount diameter: 3 x Ø 80 mm Passage width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 to max. 27.5 m/min Machine dimensions (W x D x H): approx. 5,500 x 2,800 x 4,900 mm Power supply / Connected load: 380 Volt 50 Hz / 38 kW Accessories / Special Equipment: The machine is equipped with a workpiece table and a pull bridge for 3 broaching stations. Additionally, the machine features an automatic workpiece feeding system for 2 workpieces. Clamping of shaft and end-piece holders is hydraulic. The machine features a coolant system with integrated magnetic chip conveyor, designed for use without a special foundation (pit). Remarks: This machine is designed for use in high-volume production. The machine is in very good condition and still has its original paint. The machine can be inspected under power at our warehouse.

Kondisi: hampir baru (bekas), Rotary vane vacuum pump with oil bath. Available in stock. Pump thoroughly overhauled. With warranty. Nominal flow rate: 300 m³/h Final vacuum: 0.1 mbar abs. For any inquiries, please contact us. Lsdpfxsftzzgj Al Nshi

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Specialised press designed from the ground up for briquetting iron, steel, and similar alloys. Equipped with integrated oil collection mats. Packaging table not included – only briquette guides (rails) are provided. Features clear bunker doors and oil heating elements as standard. The machines are operated via Siemens KTP-400 touchscreens. 2nd generation available for purchase from February 2024. For this press, please contact us first! Technical Data: Throughput: Up to 600 briquettes/hour* Main motor: 30 kW Feed motors: 2.6 kW Cooling system: 1.6 kW Total connected load: 34.2 kW Lhjdpfxstmugce Al Nsi Oil tank: 260 litres Filters: 4 Length: 2,000 mm Width: 2,000 mm Height: 2,200 mm Weight: 3,500 kg Briquette size: 40–110, D80 mm Warranty: 2 years / 2,000 operating hours

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, kecepatan spindel (maks.): 8.000 rpm, jumlah sumbu: 9, This 9-axis TRAUB TNL 32 Swiss-type lathe was manufactured in 2014. It features a TX8i-s control system with a 64-bit RISC CNC/PLC processor, a TFT color display, and an electronic handwheel. The main spindle supports a 32 mm bar capacity, and the machine is equipped with a counter spindle featuring a C-axis. It comes with an upper tool turret with dual drive and a lower turret with nine tool holders. Consider the option of purchasing this TRAUB TNL 32 Swiss-type lathe. Contact us for further information. • Control: TRAUB TX8i-s CNC/PLC with 64-bit RISC processor and fiber optic PC; color TFT flat screen; electronic handwheel • Included software/extensions: Polyform (C-axis programming), Helical (3D Y-axis interpolation), Thread cutting without compensating chuck, Cut-off tool breakage monitoring, Cut-off part ejection monitoring, Axis disable, T-ATC • Main spindle: Motor spindle with hollow clamping system; 32 mm bar/bore; C-axis, max. speed 8,000 rpm • Max. stroke: 305 mm (L version) / 127 mm (K version) • Counter spindle: Partial hollow clamping, C-axis; cleaning unit mounted on the lower turret • Upper tool turret: X/Y/Z/H/B-axes; 10 tool holders; dual drive • Lower tool turret: X/Y/Z/H-axes; 9 tool holders; combined drive; independent counter spindle operation • Measuring/feedback: Linear glass scales on the X-axis (upper and lower turret); rotary encoders on C-axis Lhodpox D Drcefx Al Noi • Backworking: 8-position backworking table with combined drive for up to 3 tools; prepared for internal coolant supply • Clamping: Clamping direction reversal mechanism and counter clamping pressure device on main and counter spindle • Coolant system: Standard system with 3-bar and 8-bar pumps (50 Hz) in a 500-liter tank; additional 28-bar pump (50 Hz), 19 l/min flow rate • Extraction: D 150 mm port for central extraction system Additional equipment • None indicated (no robot, bar loader, chip conveyor, or external automation listed)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, jam operasional: 2.240 h, de Ledpjx D Rxpsfx Al Nehi

Tahun pembuatan: 2013, Kondisi: baik (bekas), Mesin Uji Universal Zwick/roll Tipe: 1488 Dimodernisasi tahun 2013 dengan perangkat lunak Daya uji maks: 200 kN Lsdpfx Aexw N Uvol Nohi Kebutuhan ruang: Lebar: 2.000 mm Tinggi: 2.100 mm Kedalaman: 800 mm Berat: sekitar 1.000 kg.

Kondisi: baik (bekas), Tahun pembuatan: 2005, jam operasional: 32.870 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 6030578, diameter pembubutan: 32 mm, kecepatan spindel (maks.): 8.000 rpm, Diameter batang (maks.): 32 mm, We offer for sale a Traub TNL26K automatic lathe. The machine is connected to power and can be inspected in operation by prior appointment. Year of manufacture: 2005 Spindle bore: 32 mm Main spindle: 6.7/10.7 kW; 8000 rpm Counter spindle: 6.7/10.7 kW; 8000 rpm Upper turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Lower turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Connected load: 24 kW Bar feeder: FMB Turbo 5-42/4200 mm Swarf conveyor: Knoll 240 S1/100 Coolant compact band filter: Resy Lhsdpfxsvldx Ae Al Nei The machine comes with a large number of both static and driven tool holders—the list is shown in the attached photo.

Tahun pembuatan: 2007, Kondisi: baik (bekas), nomor mesin/kendaraan: 1380-1207, mit Siemens Sinumerik Bedienpanel mit Späneförderer Bedienpult Elektroschrank Spindeldurchlass 60 mm Ledpfxjm Nb Rio Al Nshi max. Werkstücklänge 340 mm

Kondisi: bekas, Tahun pembuatan: 2008, Technical details: Workpiece diameter – max.: 29 mm Workpiece diameter – min.: 26 mm Workpiece length: 66 mm Ledjlqac Sopfx Al Njhi The system was originally supplied for the following workpiece sizes: Diameter 26mm – 29mm Length 65mm – 66mm By using interchangeable parts in the clamping device, handling unit, etc., diameters of up to approx. Ø50mm and total lengths of up to roughly 400mm should be possible with some modifications. This is also dependent on tool lengths, machining lengths on the component, etc.