GEORG slitter 1500x1,5

GEORG Slitter 1500x1,5

Slitter GEORG 1500x1.5x25

Main Technical Specifications

Strip thickness: 0.24–1.5 mm

Decoiler: Maximum coil weight 25 t

Coil width: 230–1500 mm

Maximum outside coil diameter: 1850 mm

Line speed: 200 m/min

Cutting tolerance: +/- 0.125 mm

Line direction: Right to left

Recoiler maximum coil weight: 16 t

Number of slitting heads: 2

PLC: Siemens S7 1200

Slitting capacity: Number of cuts at 350 MPa

- 24 cuts for thickness 0.25 mm
Pedpfsxl R A Rjx Abdegw
- 28 cuts for thickness 0.50 mm
- 21 cuts for thickness 0.75 mm
- 18 cuts for thickness 1.00 mm
- 15 cuts for thickness 1.25 mm
- 12 cuts for thickness 1.50 mm

Scope of supply:

1. Coil car
2. Decoiler
3. Edge guide system with 2 sensors
4. Pinch roll with 203.2 mm diameter before shear
5. Double intermediate pit cover
6. Slitting shear
7. 160 mm diameter shaft
8. Blades
9. 1 quick-change slitting head available offline
10. Scrap chopper and conveyor
11. Intermediate coil table
12. Loop pit and covers
13. Strip braking unit
14. Motorized recoiler with clamping separator arm
15. Coil discharge car
16. Four-arm turnstile
17. Electrical cabinets and control panels
18. Existing tooling
19. Existing documentation

Coil thickness: 0.24–1.5 mm
Decoiler maximum coil weight: 25 t
Coil width: 230–1500 mm
Maximum outside coil diameter: 1850 mm
Line speed: 200 m/min
Cutting tolerance: +/- 0.125 mm
Line direction: Right to left
Recoiler maximum coil weight: 16 t
Number of slitting heads: 2
PLC: Siemens S7 1200
For 0.25 mm thickness: 24 cuts at 350 MPa
For 0.50 mm thickness: 28 cuts at 350 MPa
For 0.75 mm thickness: 21 cuts at 350 MPa
For 1.00 mm thickness: 18 cuts at 350 MPa
For 1.25 mm thickness: 15 cuts at 350 MPa
For 1.50 mm thickness: 12 cuts at 350 MPa

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.