Gergaji bundar logam berkinerja tinggi

GERD WOLFF GLS-250 Hochleistungskreissäge

Kondisi: baik (bekas), Tahun pembuatan: 2004, jam operasional: 77.711 h, jarak pergerakan sumbu X: 650 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 500 mm, model controller: Heidenhain iTNC530, pergerakan cepat sumbu Z: 45.000 m/menit, gerak cepat sumbu X: 45.000 m/menit, pergeseran cepat sumbu Y: 45.000 m/menit, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Hermle C30 U Siemens 840D Jam kerja mesin: 77.711 jam, jam kerja spindle: 16.294 jam - Spindle HSK-A63, 10.000 rpm - 32 tempat alat - Meja putar SRT 280 mm dengan sistem penjepit terintegrasi SK50 (jika tidak diperlukan, dapat ditutup atau diubah menjadi sistem penjepit titik nol) - Pendinginan eksternal dengan cairan pendingin - Pendinginan internal dengan filter pita kertas, tekanan 80 bar - Pistol pembilas serbuk - Konveyor serbuk Kedpfsxcp R Iex Ac Howu - Modul pengoperasian manual - Pintu kabin otomatis - 32 tempat alat ditambah 87 tempat tambahan (ZM87) - Kompensasi suhu - Pengukuran alat BLUM sisi - Probe ukur Renishaw - Wadah serbuk - Lampu status Mesin telah diperiksa sepenuhnya, tersedia protokol geometri dan pengukuran uji kebulatan. Mesin dapat dilihat dan diuji dengan listrik kapan saja. Kondisi sangat terawat.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, Oil-hydraulic Double-Column Press 400 T with Sliding Table Press Type: Double-Column Press Thermally Neutral Range: 80 – 120 °C Number of Operator Sides: 1 side Forces: - Pressing Force max.: 4,000 kN - Free Tearing Force max.: 400 kN - Pressure Build-Up Time (Closed Tool, Steel on Steel): Max. 4 sec. Dimensions: - Length: 3,800 mm - Width: 4,475 mm - Max. Opening: 800 mm - Stroke: 800 mm - Table Height above floor: 1,100 mm - Total height above floor (overall height): approx. 4,300 mm - Minimum hall height: 5,500 mm - Parallelism deviation at 20°C: +/- 0.1 mm Deflection: - Determined at max. closing force with 70% coverage: ≤ 0.2 mm/m Weight: - Total weight of the press (without operating fluids and table plate): approx. 28 t Press Table: - Table size: 1,500 x 1,500 mm Speeds: - Fast closing speed: 100 mm/s - Pressing speed: 8 – 3 mm/s Noise Level: - Sound pressure level measured at 1.5m height at control panel according to DIN 45635-T16-KL3: max. 78 dB(A) Kwedpfxsph Uk Nj Ac Hou Hydraulics: - Number of main cylinders/ram cylinders: 1 pc. - Operating pressure: max. 300 bar - Pressure build-up time (press): 4 sec. - Pressure accuracy during ram stroke: +/- 3 bar - Main pump: BOSCH REXROTH axial piston pump approx. 145 L/min - Oil volume: approx. HLP 46 MW, 1,000 liters - Ambient temperature: max. 40 °C - Oil temperature: max. 55 °C - Auxiliary pump: BOSCH REXROTH gear pump 10 L/min for pressure maintenance up to 300 sec. Electrical System: - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Hydraulic main motor connection: 40 kW Features: - Sliding table press with 400 T capacity - Closing speed up to 100 mm/s (adjustable via touchscreen) - Opening speed up to 100 mm/s (adjustable via touchscreen) - Pressing speed start at 10 mm/s (adjustable via touchscreen) - Table plate size: 1,500 x 1,500 mm - Ram size approx. 1,600 x 1,500 mm - Oil temperature monitoring: 55°C warning, 60°C shutdown - Automatic lubrication (adjustable via touchscreen) - Free positioning of ram (adjustable via touchscreen) - SICK/PILZ light curtains 14 mm, front, up to 1,800 mm height - Hydraulic and mechanical ram locking - Circulation oil cooling (adjustable via touchscreen) - Ejector in table, 20 T press force, 350 mm stroke - Ejector travels outward with table - Table plate precision milled, with DIN 22 T-slots - Pressure setting from 60 T to 400 T (adjustable via touchscreen) - Travel limit optionally by pressure or position - Setup, single stroke, and automatic cycle operation (adjustable via touchscreen) - Swivelling control panel on cabinet - Two-hand safety operation, with open button, selector switch for manual/single stroke/automatic cycle - Assembly, commissioning, and training available at extra charge - Control system supplied by SIEMENS (S7 1200), with 9-inch touchscreen monitor. Scope of delivery includes SECOMEA Ethernet-based remote maintenance unit. - The press features two side windows, each 1,000 mm high and 800 mm wide, with double doors. (Sliding Table Press, Hydraulic Press, Double-Column Press)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.700 mm, jarak gerak sumbu Z: 1.500 mm, Heidenhain 530 Kepala frais diagonal dengan pengindeksan 2,5° x 2,5° Kecepatan hingga 6.000 rpm Penjepit alat SK50 Kwedpfsx I A Hvsx Ac Hou Pendinginan internal dengan 36 bar Konveyor serpihan memanjang + konveyor melintang

Kondisi: bekas, Tahun pembuatan: 2012, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 500 mm, Traversing paths (X/Y/Z): 600 / 500 / 500 mm NC rotary table: 600 x 500 mm B-axis swivel range: -5° to +110° C-axis: 360° Maximum load capacity: 400 kg, direct measuring systems including table cooling Dynamic package: Linear drives on X/Y axes Rapid traverse X/Y/Z: 80 m/min Acceleration X/Y/Z: 10 m/s² Active cooling for main spindle, linear drives, and table Control: Siemens 840D SL Operate Spindle: 20–24,000 rpm, HSK-A63 per DIN 69893 • Tool magazine: Chain-type tool magazine with 60 stations • Tool length measurement and breakage monitoring Blum Z-Nano • Scraper belt chip conveyor with cleaned slotted screen, internal coolant supply (IKZ) with paper filter, 40 bar, 231 l/min, 600 l tank, including rotating inspection window, linear system sealing air, bed flushing • Selectable air blast through spindle center via M function, conditioned air with minimal oil content • Electronic handwheel Ksdpfx Asyc Tthsc Hjwu • Spray gun for chip rinsing • Enhanced chip flushing • Laminated safety glass for workspace door and side window • Operating mode 4 • High speed settings • Blum HSK-A63 touch probe • Preparation for 3D QuickSet • Optionally, oil mist extraction system • New spindle at 25,800 spindle hours

Kondisi: bekas, Tahun pembuatan: 2017, jam operasional: 1.400 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.450 mm, jarak lintasan sumbu Y: 700 mm, jarak gerak sumbu Z: 550 mm, gerak cepat sumbu X: 42 m/menit, pergeseran cepat sumbu Y: 42 m/menit, pergerakan cepat sumbu Z: 42 m/menit, kecepatan spindel (maks.): 14.000 rpm, CNC: Heidenhain 640 AREA KERJA Sumbu X: 1.450 mm Sumbu Y: 700 mm Sumbu Z: 550 mm Pergerakan cepat (X/Y/Z): 42 m/menit Kecepatan maksimum spindle: 14.000 rpm Tipe shank alat: SK 40 Kapasitas rak alat: 30 Dimensi meja: 1.760 × 750 mm Beban maksimal meja: 2.000 kg PERLENGKAPAN: • CNC HEIDENHAIN 640 • Pembaca file DXF • Persiapan untuk sumbu keempat • Presetter alat • Probing pengukuran benda kerja Heidenhain Kwedsya Imqjpfx Ac Heu • Sistem pendingin tekanan tinggi melalui spindle 40 bar dengan tangki filtrasi kertas, kapasitas 600 liter • Meja berpendingin • Unit pendingin udara • Rak alat 30 posisi • Buku manual dan deklarasi CE

Kondisi: bekas, Tahun pembuatan: 2006, Panjang pembubutan 1500 mm Lubang spindle 105 mm Diameter pembubutan maks. 420 mm Kodpfx Aex Nfwgsc Howu Putaran spindle 3300 rpm Putaran alat berputar 3000 rpm Revolver dengan 12 posisi Lunak hidrolik Kontrol: Mazatrol 640 T Nexus Dilengkapi dengan: Bar feeder FMB SL 80 Brille hidrolik SMW SLU 3,2 3 alat berputar Berbagai pemegang alat

Kondisi: bekas, de-to-en-001 Kwsdpfxjw Tnhbe Ac Hsu

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, CMZ TD45Y (2019) CNC LATHE WITH LIVE TOOLING AND “Y” AXIS Z 2,250 CNC FANUC 32i B 15” Color LCD Manual-Guide -Swing over bed: 950mm Kjdeyklzmjpfx Ac Howu -Swing over carriage: 715mm -Max. turning diameter: 550mm -Max. turning length: 2,200mm -Axis travels: X: 380mm Y: +80 / -60mm Z: 2,200mm -Chuck diameter: 315/400mm -Bar capacity: 127mm -Spindle nose: ASA 11” A2 -Turning head: 2,200 rpm - 51kW (S3 25%) / 39kW (S1) -Max. torque: 3,600 Nm (Max), 3,000 Nm (S2 25%), 2,000 Nm (S1) -Powered turret: 12 stations (16 total) (1-station index in 0.25 sec) -Tool size: 25 x 25mm (diameter 50mm) -Live tools power: 13.7 / 11kW, 12,000 rpm -C-axis indexing: 0.001mm INCLUDED EQUIPMENT: -3-jaw hydraulic chuck CGH-21, Ø530mm -C axis 360° (0.001° indexing) -Tool presetter -Integrated tailstock -Programmable tailstock -High-pressure pump 30 bar -Chip conveyor -Preparation, base and logic for steady rest -Programmable hydraulic steady rest SMW AUTOBLOK SLU-X-4-ZS (30–245 mm) -Set of internal/external tool holders and powered tool holders -Set of CMZ and FANUC manuals CONDITION: Machine in excellent (like-new) condition. Can be seen in operation. Immediate delivery.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, fr-to-it Ksdpfeyf Im Iox Ac Hswu

Kondisi: bekas, Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.500 mm, jarak gerak sumbu Z: 1.500 mm, kecepatan spindel (maks.): 6.000 rpm, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! TECHNICAL MAIN DATA Year of manufacture: 2020 Capacities / Travel paths: Longitudinal (X): 3,000 mm Vertical (Y): 1,500 mm Cross (Z): 1,500 mm Clamping area NC rotary table: Indexing plate: 2,400 x 1,900 mm Max. transport load (with centered load): 10,000 kg Positioning accuracy arc/sec: ± 2.5" Max. swing diameter: Approx. 2,900 mm Paint finish: RAL 7024 graphite grey RAL 7038 agate grey Tool holder: DIN 69871 AD (ISO50) Big Plus Retaining bolt: DIN 69872 Type A Main spindle drive: Motor / Manufacturer main spindle drive: Heidenhain Max. drive power: 32 kW from 376 rpm Max. torque: 1,085 Nm (constant up to 376 rpm) Speed regulation/gearbox: 3-stage (oil-cooled) with automatic shifting Spindle speeds 6,000 rpm: - Low range: 0-738 rpm - Medium range: 739-1,842 rpm - High range: 1,843-6,000 rpm Axis drives/feed: Axis drive motors: Manufacturer Heidenhain (digital drives) Rapid traverse max.: X, Y, Z axes: 25,000 mm/min Kedpfxeygiwqs Ac Hjwu Working feed max.: X, Y, Z axes: 15,000 mm/min Maximum average acceleration: 2 m/s² Max. feed force: X, Y, Z axes: 26,000 N Axis drive systems: X-axis (longitudinal): Preloaded ball screw Ø 63 x 40 Z-axis (vertical): Preloaded ball screw Ø 63 x 20 Y-axis (cross): Preloaded ball screw Ø 50 x 20 Guide system: X-axis (longitudinal): 6 pcs INA RUE 55 EL Z-axis (vertical): 4 pcs INA RUE 65 EL Y-axis (cross): 8 pcs INA RUE 55 E-HL and additional damping unit Clamping table / Table surface: T-slot size 10x: 22 H 12 mm Reference slot center 1x: 22 H 8 mm T-slot spacing: 150 mm (pitch of outer slots 1800 mm) Weight: Weight RT3000: approx. 32,000 kg Connected load: approx. 53 KVA Heidenhain TNC 640HSCI Automatic tool changer with 80 stations Automatic oil-cooled milling head 2.5° x 1° 2 chip conveyors Coolant system upgraded to 37 bar through spindle Special operating mode 4 RepairFIT is our proven solution for a profitable entry into our product lines. The machines available in this series are sourced through a strict selection process and undergo a thorough examination (deep-dive check). After intensive cleaning, any detected obvious defects and faults are professionally repaired by our expert service team.