Miny mill

GETECHA

Kondisi: bekas, Tahun pembuatan: 2016, jam operasional: 11.200 h,

Kondisi: diremaj di bengkel (bekas), jarak pergerakan sumbu X: 310 mm, jarak lintasan sumbu Y: 294 mm, jarak gerak sumbu Z: 210 mm, berat keseluruhan: 3.000 kg, kecepatan spindel (maks.): 50.000 rpm, Used HSC Machine RXP400DS/ RXD5 - Refurbished - The machine is completely overhauled, inspected, and measured in-house. It once again meets new machine tolerances! Working area: - X-axis: 200 mm - Y-axis: 294 mm - Z-axis: 200 mm - Linear axis drives: Linear motors on all axes. - Rotary axis drives: High-dynamic direct drives with integrated cooling. - Feed rates: 0 - 40,000 mm/min on all linear axes. - Network connection - Tool measurement laser: Diameter and contour measurement, wear monitoring, and breakage control of milling tools. - Chuck control, 1st chuck - Emulsion cooling with mechanical oil mist extraction - RMS Main Jobmanager - Spindle max. 60,000 rpm, HSK 25 - Tool changer: 12-position linear magazine, optionally convertible to chain-type changer - High-precision option - Remote maintenance via Teamviewer - Machine transport dimensions: Iiodpslzhhcsfx Aahsk W 2,425 x L 1,925 x H 2,140 mm - Weight: approx. 3,000 kg Viewing the machine in ready-to-operate condition is possible at any time. You are also invited to visit our website or our Hüttmann YouTube channel to learn more about the type and scope of our refurbished machines.

Tahun pembuatan: 2025, Kondisi: baru, The LITech hammer mills HM 120 / 200 / 300 / 400 are ideally suited for the pre-crushing of medium-hard, tough, and brittle materials such as soils, precious metals, electronic scrap, epoxy resin, gypsum, glass, catalysts, ceramics, clinker, coal, coke, minerals, and many more! Ijdpfx Aaeg Ay Dhshjik

Tahun pembuatan: 2023, Kondisi: baru, Nitrogen generation plants for the production of a wide range of purities, pressures, and flow rates. The systems are composed of high-quality components such as filters, adsorbers, and nitrogen separation units from Parker Hannifin, as well as compressors from Kaeser. If you require high-pressure compression, we collaborate with Bauer Kompressoren. To date, more than 400 systems have been installed at our customers’ facilities. Iedpenq Di Tsfx Aaheik All systems are configured and tailored by us to suit your site conditions and specific requirements. We also design and implement containerized plants for both outdoor and indoor installation. We look forward to receiving your inquiries...

Tahun pembuatan: 2024, Kondisi: baru, nomor mesin/kendaraan: SPIN500, Co-lead Spin Dryer ist eine kompakte Zentrifugalmaschine zur Entwässerung von Blattgemüse und anderem Frischgemüse. Das Produkt wird samt Korb in die Maschine eingesetzt, nach dem Schließen des Deckels startet der Motor automatisch. Während des Zentrifugierens wird der Deckel durch einen Magnetschalter verriegelt. Geeignet für das Entfernen von Oberflächenfeuchtigkeit an Blattgemüse, Obst und geschnittenem Gemüse. Iisdpfx Aoiniz Doahsk Das Gehäuse besteht aus Edelstahl SUS304 und zeichnet sich durch eine hochwertige Optik aus. Die Maschine ist mit einem Entwässerungskorb ausgestattet, der die Handhabung und Lagerung erleichtert. Die Entwässerungszeit und -geschwindigkeit können individuell eingestellt werden, der Betrieb erfolgt äußerst stabil. Ideal für den Einsatz in allen Bereichen der Obst- und Gemüseverarbeitung sowie für mittlere und große industrielle Gemeinschaftsverpfleger, die professionelle Gemüseentwässerung benötigen. * Frequenzgeregelte Zentrifugaltechnologie ermöglicht effiziente Oberflächenentwässerung des Produkts; * Dank Frequenzumformer und optischer Sensortechnik werden Entwässerungszeit und -geschwindigkeit sowie Start/Stopp-Funktion präzise gesteuert; * Volle Öffnungskonstruktion für einfache Entnahme und Wartung bei der Gemüseverarbeitung; * Antrieb über frequenzgeregelten Drehstrommotor (wahlweise drei- oder einphasig); laufruhig, mit flexibler Drehzahleinstellung.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, Demag Ergotech - System 250/280-80 Clamping force: 25 tonnes Isdpfohrw Amox Aahsik Screw diameter: 25 mm Year of manufacture: 2003 Sprue picker 2 units

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, Battenfeld 1300/350 Year of manufacture: 2003 Iodpfxjd Tnbhs Aahsik Clamping force: 130 tons Screw diameter: 40 mm Operating hours: 77,890 h Tie bar spacing: 420 x 420 mm

Tahun pembuatan: 1977, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 0392, Infeed width (mm): 500 Iisdpfx Aodt Rthsahjk kW: 7.5 A: 380

Tahun pembuatan: 2002, Kondisi: baik (bekas), Manufacturer: Matsuura Model: LX-O Control: YASNAC Year of manufacture: 2002 Specifications Metric US Standard X-axis travel: 330 mm Y-axis travel: 300 mm Z-axis travel: 250 mm Table length: 540 mm Table width: 320 mm Table load capacity: 100 kg Feed rate X-axis: 90,000 mm/min Feed rate Y-axis: 90,000 mm/min Feed rate Z-axis: 90,000 mm/min Tool holder: ISO 30 / BT / MK Spindle power: 7.5 kW Spindle speed: 40,000 rpm Tool changer: 30 positions Chip conveyor: Yes Dimensions (approximate) Iiodpfxjlz Rvle Aahek Length: 2,800 mm Width: 2,600 mm Height: 2,800 mm Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, no representations or contractual terms are implied. We recommend verifying all important details.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2007, jam operasional: 58.263 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 203130, diameter sekrup: 25 mm, volume langkah: 59 cm³, berat injeksi: 54 g, Perlengkapan: dokumentasi / manual, Here we offer, as specialists in used injection moulding machinery, the following well-maintained pre-owned injection moulding machine for sale. Naturally, we also purchase well-maintained injection moulding machines from 2010 onwards. We have been wholesalers of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 320C 500-170 Serial Number: 203130 Year of Manufacture: 2007 Ijdov U Tl Djpfx Aahjik Operating Hours: 58,263 h Dimensions (L/W/H): 3.12 x 1.43 x 1.99 m Weight: 2,300 kg Functionality: fully operational Condition: excellent Extras: - Handling interface - 25 mm highly wear-resistant thermoplastic screw/cylinder Control System: Selogica Injection Unit: - Screw diameter: 25 mm - Shot weight: 54 g/PS - Injection pressure: 2,500 bar - Injection volume: 59 ccm Clamping Unit: - Clamping force: 50 t / 500 kN - Tie bar distance: 320 x 320 mm - Mounting plates: 446 x 446 mm - Mould installation height: 200 mm - Max. platen distance: 550 mm - Ejector stroke / force: 125 mm / 30 kN - Clamping unit: hydraulic Drive Power: 11 kW Heating Power: 9.4 kW Total Power: 21 kW The machine is immediately available from our warehouse in Hannover, Germany, and has been tested. Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - German language - Single ownership – German origin - Regularly serviced by manufacturer and previous owner Warranty: Warranty valid until first commissioning Loading/Shipping: Free loading onto buyer’s truck or free delivery within Germany against freight cost reimbursement Available immediately from our warehouse in Hannover, Germany Information about our machines and company: - We only sell our own machines, acquired from ongoing production, from our Hannover warehouse - All machines offered are thoroughly inspected and tested before decommissioning - We do NOT sell insolvency assets – we are NOT brokers acting on behalf of third parties - All our machines come from successful companies where regular maintenance is standard practice - All machines offered can be inspected at our warehouse