Pers hidarulik

Gidropress P315

Hydraulic frame press for sheet metal punching with a capacity of 630 tons, designed for cold forming.

The vertical frame press, featuring a welded steel construction, consists of a bed and a top platen joined by bolts. A control cabinet is installed adjacent to the press, and an oil overflow tank is located deep within the foundation, facilitating oil filling for the press system. The press units are removable, simplifying assembly and maintenance.

The press is operated via push-button control. The stroke height of the ram is set by adjusting the end-stop position.

Technical specifications:

1. Rated pressing force: 630 tons
2. Rated operating fluid pressure: 2,200 kN/cm
3. Ram stroke: 750 mm
4. Ram speed, mm/s:
a) Idle speed: 215
b) Working stroke: 10
c) Return stroke: 120
5. Maximum distance between bed and ram: 1,400 mm
6. Distance between uprights: 2,200 mm
7. Table dimensions, mm:
a) Left to right: 2,220
b) Front to back: 1,800
8. Die plate thickness: 220 mm
9. Table height above floor: 410 mm
10. Nominal force of hydraulic cushion: 250 tf
11. Hydraulic cushion stroke: 350 mm
12. Ejector speed, mm/s:
a) Ascending: 51
13. Press dimensions, mm:
a) Left to right: 5,070
b) Front to back: 3,000
c) Height: 7,065
Iaedepgkt Sspfx Aa Nol
14. Press height above floor: 5,480 mm
15. Press weight: 69,400 kg
Electric motor speed: 1,450 min-1
Operating voltage: 400/230 V
Mains frequency: 50 Hz ± 1 %
Rated air pressure: 0.7 Pa

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.