Mesin bubut vertikal

GILDEMEISTER CTV 250 V3

Kondisi: bekas, Tahun pembuatan: 2013, produsen pengendali: Siemens, model controller: 840Dsl, Description: Main Spindle: Technology: Motor spindle Speed: 5,000 rpm Power (max.): 29 kW Torque (max.): 250 Nm Bar capacity: 65 mm Workpiece clamping: Collet chuck, Hainbuch Spanntop nova Kombi Axzug size 65 Sub Spindle: Technology: Motor spindle Speed: 7,000 rpm Power (max.): 22 kW Torque (max.): 130 Nm Workpiece clamping: 3-jaw chuck, SMW Autoblok KNCS-N-225-66 Part ejector: Pneumatic Z-axis travel: 750 mm Ksdpjw Tg Adofx Ac Hjwu Tool Turret I (X/Y/Z): Technology: 12-station turret Tool interface: VDI30 Driven tools: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Y/Z: 270/100/750 mm Rapid traverse in X/Y/Z: 24/10/30 m/min Tool Turret II (X/Z): Technology: 12-station turret Tool interface: VDI30 Driven tools: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Z: 205/750 mm Rapid traverse in X/Z: 24/30 m/min Features/Accessories: Chip management: Chip conveyor Coolant management: High-pressure internal coolant pumps, 14 bar Barfeed: Short bar loader, EMCO LM 1200 Finished part removal: Workpiece picker (pneumatic) with conveyor belt Oil mist extraction: Mechanical separator, make Absolent Tool holders: Various static and driven holders Additional equipment: Spindle chiller unit

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 3806, panjang penggilingan: 600 mm, lebar penggilingan: 250 mm, diameter roda gerinda: 250 mm, kecepatan spindle penggilingan: 3.000 rpm, daya: 3,5 kW (4,76 hp), Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, JUNG JF520 – workshop overhauled Mechanically and electrically inspected and function-tested by our JUNG specialists Wear parts replaced Geometry reconditioned according to the JUNG new machine protocol - Grinding area: 600 x 250 mm - Stepper motor feed - 3-axis HEIDENHAIN digital readout Kjdswz Hf Nspfx Ac Howu - Dressing size compensation - Magnetic force control - Automatic central lubrication - Used magnetic chuck - Used paper band filter 6 weeks parts warranty Delivery time: short notice We are happy to accept your used JUNG grinding machine in part exchange

Kondisi: bekas, Tahun pembuatan: 2019, Turning diameter: 400 mm Turning length: 584 mm Swing diameter over bed: 750 mm Control: Siemens 828 D ShopTurn Spindle bore: 81 mm Spindle speed: 3,500 rpm Spindle drive: 18.5/22 kW Spindle torque: 410 Nm Number of tools in turret 1: 12 BMT 65 of which driven: 12 BMT 65 Driven tool speed: 5,000 rpm Milling spindle drive: MK 5 kW y-axis: +/- 60 mm Rapid traverse: 30/30/10 m/min Tailstock: MK 5 Dimensions (L x W x H): 4.6 x 1.9 x 2.1 m Machine weight: approx. 6.65 t Flat-bed CNC lathe with driven tools and y-axis Equipment: - 3-jaw chuck Kitagawa Ø 250 mm - Chip conveyor - Parts catcher with box in door - Signal lamp - 2 + 2 driven tool holders - Various static tool holders - Flat guideways - Tool measurement arm - Programmable tailstock Kedpfx Asww Nazsc Howu - 23 bar coolant system - Enlarged coolant tank 225 l - Double cartridge filter - Coolant spray gun - Dual-pressure clamping system

Kondisi: bekas, Tahun pembuatan: 2001, 1 Kodpfxju Rnluj Ac Hswu

Kondisi: baru, Tahun pembuatan: 2022, Power output: 1.1 kW Drilling capacity in steel / Continuous drilling capacity: 30 mm / 25 mm diameter Kwsdpegulr Hofx Ac Hju Speed range: 120 - 1810 rpm Number of speed steps: 9 Spindle taper: MT-4 (Morse Taper 4) Quill travel: 120 mm Spindle throat (distance spindle-column): 254 mm Table size: 475 mm x 425 mm Drill table tilting/swiveling: 45° left / 360° Column diameter: 80 mm Keyless drill chuck: 1 - 16 mm Weight: 132 kg

Tahun pembuatan: 1983, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of manufacture: 1983 Machine No.: 03.2133 Weight: 6,800 kg Kwjdpsd Nb A Nefx Ac Heu General Information / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations in very good condition - Pulling force: 16,000 kg - Broaching length: 1,250 mm - Broaching stations: 3 units - Distance between broaching stations: 125 mm - Clamping diameter for draw heads: 3 x Ø 80 mm - Pass-through width between cylinders: max. 435 mm - Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10 m/min - Return speed: hydraulically infinitely variable from 5 up to max. 25 m/min - Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm (from pit base) - Power supply / rated connected load: 380 Volt, 50 Hz / 22 kW Accessories / Special Equipment: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-operated draw heads according to DIN 1417/18 for locking broaching tools in the draw bridge. The needle extractor heads in the tool feeder are hydraulically locked. The machine includes a coolant system with integrated magnetic band chip conveyor for installation in a pit. Remarks: The machine is in very good condition and still has its original paintwork. It is designed for use in serial production; for optimal operation, a foundation (pit) is ideally required. Draw heads and needle extractors are available upon request. The machine can be inspected at our warehouse.

Kondisi: bekas, Tahun pembuatan: 2008, X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 600 mm Control: SINUMERIK 840D Powerline Spindle speeds – infinitely variable: 1 – 8,000 rpm Drive power at 40% duty cycle: 28.00 kW Spindle diameter at front bearing: 80.00 mm Spindle taper: HSK-A100 B-axis: 187° Feed rate X/Y/Z axis: 15,000 mm/min Rapid traverse X/Y/Z: 50.00 m/min Feed force X/Y/Z axis: 10,000 N B-axis rapid traverse: 11.20 rpm Pallet size: 800 x 630 mm Table load capacity: 0.80 t C-axis: 360.000 x 0.001° Kedpfx Acjw Df A Sj Hewu Table speed range: 1 – 500 rpm Tool magazine: chain magazine for 120 tools Tool diameter: 100 mm Tool diameter with 2 free adjacent spaces: 160 mm Max. tool length: 350 mm Max. tool weight: 10.00 kg Total connected load: 60.00 kW Machine weight approx.: 13.00 t Installation dimensions approx.: 7.40 x 5.30 x H3.50 m Equipped with Siemens SINUMERIK 840D control, tool taper cleaning, tool breakage monitoring, coolant system with 2 pressure stages (40 bar / 80 bar), chip conveyor, operation mode 4, extraction system.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2012, nomor mesin/kendaraan: 778 F 319, de-01 Kwodpfx Acomx Rrle Hju

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter up to 220 mm, and a main spindle power of 35.5 kW. The machine is equipped with two high-performance spindles (66 mm bar capacity), two tool turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, as well as Y-axis functionality for both the upper and lower turrets. A 35-bar high-pressure coolant system with integrated filtration and an additional tank is also included. For further details, please refer to the attached brochure or contact us directly. Kjdpfx Acexmhdne Hjwu Equipment: - LPS for left spindle - Reducing tube for left spindle - Hainbuch AXFIX 65 (standard) collet chuck 2703/0008 for left spindle - Hainbuch AXFIX 65 (standard) collet chuck 2703/0008 for right spindle - Tool presetter - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75 μm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75 μm filter - Coolant washing nozzle - TA/06000/10 coolant chiller with 8,000 W cooling capacity - Machine status indicator - Tool life management - Tool load monitoring - Programmable automatic parts catcher (pneumatic) - The workpiece removal unit is equipped with a gripper that opens and closes pneumatically for part extraction - Pneumatic ejector for the sub-spindle with 100 mm adjustable stroke; end position detected by sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Prepared for extraction system, connection flange Ø100 The machine comes with a chip conveyor, coolant unit, and tool package. It can be inspected under power and is available immediately. Operated in single-shift mode only. Further information upon request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Siemens control Bar capacity 32 mm 2 x 12-station turrets with driven tools Kwsdpfxowh U Edo Ac Hju Main / counter spindle Y-axis on upper turret Parts catcher Chip conveyor IRCO bar feeder magazine