Pusat pembubutan dan milling CNC

Gildemeister CTX 210 V3

Kondisi: bekas, Tahun pembuatan: 2000, Swing diameter over bed: 520 mm Swing diameter over cross slide: 480 mm Turning length: 3,000 mm Control: Siemens 840 D Number of tool stations: 12 Driven tools - number: 6 Spindle bore: 103 mm C-axis: yes Codpfx Adswp S Sqoujpt Scope of delivery - Basic machine: SINUMERIK 840 D 3 controlled axes Swing diameter over bed: 520 mm Swing diameter over cross slide: 480 mm Turret with 12 VDI shank holders, Ø 50 mm Single-stage AC main drive, 53 kW, 50% duty cycle Speed range: 30 - 3,000 rpm Main spindle head size 8 Clamping actuator for clamping devices Chip conveyor TURNING LENGTH: 3,000 mm 12 VDI shank holders DIN 69880-50x78, of which 6 positions can be equipped with driven tools, power: 6 kW at 60% duty cycle, speed range: 20–2,500 rpm 2 gearbox speeds C-AXIS Speed range: 0–20 rpm Max. programmable angle: 9999.999° Working area as per workspace diagram POWER CHUCK 3 NHF 315-82 A8 Mfr. FORKARDT with centrifugal force compensation Outer diameter: 315 mm, bore: 82 mm with hard top jaws, ground, bar material max. Ø 63 mm including draw tube and mounting

Kondisi: bekas, Tahun pembuatan: 2024, produsen pengendali: Siemens, model controller: 840 Dsl - Operate, Description: Main Spindle: Technology: Motor spindle Speed: 5,000 rpm Power (max.): 17 kW Torque (max.): 345 Nm Clamping cylinder: Hollow clamping cylinder Bar capacity: 67 mm Workpiece clamping: 3-jaw chuck, Schunk Rota THW 315-104 Counter Spindle: Technology: Motor spindle Speed: 5,000 rpm Power (max.): 17 kW Torque (max.): 345 Nm Clamping cylinder: Semi-hollow clamping cylinder Workpiece clamping: 3-jaw chuck, SMW Autoblok 250 BB Travel in Z: 1,200 mm Tailstock force: 2.5–6 kN Cpedpfx Aox Ih Rtsduot Tool Carrier (X/Y/Z/B): Technology: Traveling column with milling spindle Speed: 12,000 rpm Power (max.): 10.5 kW Torque (max.): 90 Nm Tool interface: HSK-A63 B-axis swivel range: +/- 120° General: Tool magazine: Chain magazine, 60 stations Travel in X/Y/Z: 750/200/1,100 mm Rapid traverse X/Y/Z: 40 m/min Equipment / Accessories: Position measuring system: Direct (glass scales) in X/Y Chip management: Chip conveyor Coolant management: CTS system with paper band filter and high-pressure, 20 bar Workpiece measurement: Wireless probe, Renishaw RMP 40 Tool breakage detection: Blum Z-Nano Tool monitoring: Easy Tool Monitor Automation: Automation package (automatic working area door, electrical interface Robo2Go) Mist extractor: Mechanical separator, AFS 1100 Setup mode: Electronic handwheel Technology cycle: Alternating spindle speed Digital manufacturing: IoT Connector Additional equipment: Spindle chiller, cleaning gun

Kondisi: bekas, Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 3.000 mm, diameter putar di atas sled silang: 520 mm, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 150 mm, jarak gerak sumbu Z: 3.150 mm, Diameter pembubutan 520 mm Panjang pembubutan 3000 mm Kontrol SIN 840 D Siemens Sumbu z 3150 mm Feed sumbu z 1 - 40.000 mm / mnt Gerak rapid Z-axis 40,00 m/mnt Sumbu x 600 mm Feed sumbu x 1 - 30.000 mm/mnt Gerak rapid X-axis 30,00 m/mnt Spindel utama S1 Kisaran kecepatan spindel 1 - 3.300 rpm Daya penggerak pada beban 100% 29,00 kW Kepala spindel DIN 55026 - Ukuran A11 Diameter spindel pada bantalan depan 160 mm Lubang spindel 115 mm Sumbu C 360 x 0,001° Spindel milling S2 Pemegang alat Capto C6 Kisaran kecepatan tanpa tingkat 1 - 6.000 rpm Sumbu y -100 / +150 mm Cpsdpfxexadk De Aduot Sumbu B -110 / +110° Majalah alat dengan 100 tempat Kebutuhan daya total 145 kW Berat mesin sekitar 24 t

Kondisi: bekas, Tahun pembuatan: 2010, Longitudinal travel (Z-axis): 6870 mm Cross travel (X-axis): 920 mm Center distance: 6500 mm Swing diameter over cross slide: 900 mm Control: Siemens Sinumerik 840D Tool holder: CAPTO C8 Distance spindle nose – tailstock tip: 7352 mm Max. workpiece weight: 9000 kg Tool magazine capacity: 72 stations Cpodpfxsxzuvte Aduot Total power requirement: 145 kW Machine weight approx.: 47 t Space requirement approx.: 11 x 3.2 x 3.5 m Turning spindle: - Spindle diameter: 320 mm - Spindle bore: 245 mm Main drive: - Max. spindle speed: 1600 rpm - Max. spindle torque: 4472 Nm C-axis, servo-driven main spindle: - Max. speed: 20 rpm - Max. spindle torque: 3000 Nm - Holding torque of disc brake: 6000 Nm Tailstock: - Quill diameter: 180 mm - Quill stroke: 200 mm - Quill force (adjustable): 5400 to 40000 N Tool holder: - AC drive power: 30 kW - Max. spindle speed: 6000 rpm - Max. spindle torque: 315 Nm - Travel perpendicular to X/Z plane (Y-axis): 500 mm [–200/+300] mm - Milling spindle diameter in front bearing: 100 mm Equipment/Accessories: - Internal coolant supply - Chip conveyor - Paper band filtration system - Boring bar with device - Measuring equipment - Collets - Tool holders - Spare parts - Technical documentation

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, 1 Cpjdpfxsxpfd Ds Aduet

Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, jam operasional: 7.100 h, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 650 mm, diameter putar di atas sled silang: 350 mm, diameter pembubutan: 385 mm, kecepatan spindel (min.): 4.500 rpm, lubang spindel: 67 mm, jarak pergerakan sumbu X: 255 mm, jarak gerak sumbu Z: 800 mm, For sale: Used DMG NEF400 V3, 5th Generation ISM 2-axis universal lathe with C-axis. Cpedpfx Asxzqnrjduet Travel distances: X: 255 mm Z: 800 mm Swing diameter over bed: 385 mm Max. workpiece diameter: 350 mm Turning length: 650 mm Equipment: - Main spindle as integrated spindle motor Max. speed: 4,500 rpm Drive power: 8.0/11.5 kW (100/40% duty cycle) - 12-position disk turret VDI30 with 6 powered tool stations - C-axis and spindle brake (hydraulic) - Automatic tailstock, MT4, travel: 680 mm - CNC control: Siemens 840D Solutionline with ERGOline Control, Sinumerik Operate, and ShopTurn 3G - Operating system: Linux - Technology cycle for applying alternating speed for vibration-critical setups - Tool measurement system, manually deployable in the workspace - Hydraulic unit - Coolant spray gun - Mechanical oil mist separator - Reinforced coolant pump 12 bar, 23 l/min - Chip conveyor, discharge height 1,250 mm, discharge to the right Bar machining package including: - Workpiece pick-up device with left-discharge conveyor for parts up to max. 65 mm diameter, 150 mm length, max. 3 kg weight - Hollow clamping device, draw tube internal diameter max. 67 mm - Interface for bar feeder - Foot switch for tailstock operation - Hydraulic three-jaw chuck SMW-AUTOBLOK, RMS sensor (Relocation Machine Security) Machine available immediately! Ready for operation upon delivery! We will load the machine for you! Transport can be organized upon request!

Kondisi: baik (bekas), Tahun pembuatan: 2019, Mesin memiliki 1500 jam spindle Cjdpfx Ajxy Hyzjduspt DMG Mori CLX 350 V 4, Tahun pembuatan 2019, Kontrol DMG Mori Slim Line / Siemens Shoptrun, Perjalanan sumbu X/Z 185/540 mm, Perjalanan sumbu Y 80 mm, Revolver 12 posisi, alat berpengerak, sumbu C, Pengukuran alat Tooleye, Chuck tiga rahang KNCS 225/66, Chuck collet, Holder VDI 30, Pendingin tekanan tinggi 12 bar, tailstock, Conveyor serbuk, disiapkan untuk loader batang,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, jam operasional spindle: 1.200 h, 1 piece CNC machining centre C 12 U with 5-axis simultaneous Heidenhain iTNC 640 control Manufacturer: Hermle Year of manufacture: 2015 Technical specifications Working area: - Travel X-axis: 350 mm Y-axis: 440 mm Z-axis: 330 mm - Swivel range A-axis: +115° / -115° - Swivel range C-axis: 360° - Direct measuring system - resolution: 0.0001 mm - NC rotary/swivel table: 320 mm diameter - Table load: 100 kg - A-axis rotational speed: 25 rpm - C-axis rotational speed: 40 rpm Main spindle drive: - Power output (100% / 40% duty cycle): 17 – 25 kW Csdox N Dt Hopfx Aduept - Torque (100% / 40% duty cycle): 54 – 80 Nm - Speed range: 20 – 18,000 rpm - Spindle taper: HSK-63 Rapid traverse - X, Y and Z-axis: 30 m/min - Linear acceleration: 4 m/s² Tool changer: - Magazine capacity: 36 positions - Tool diameter: 80 mm - Chip-to-chip time according to VDI 2852: 4.5 sec. Footprint: 4.00 x 4.00 x 3.10 m Machine weight: approx. 7.5 t Equipment Clamping plate, approx. 65 HSK 63 tool holders, 2 machine vices, 1 three-jaw chuck, electronic handwheel, Heidenhain touch probe, Blum calibration pin, chip flushing gun, emulsion mist extraction, Blum tool breakage/tool measurement A1, tool setting device, kinematic case, chip conveyor without high-pressure coolant system (IKZ) Terms of delivery: ex stock, Bad Emstal Availability: Available from January 2026 by arrangement, machine can be inspected under power. Technical data subject to change.

Kondisi: bekas, Tahun pembuatan: 2011, Travel path - X axis: 570 / 500 (1,070) mm Travel path - Y axis: 650 mm Travel path - Z axis: 530 mm Control: HEIDENHAIN iTNC 530 Spindle speed: 12,000 rpm Tool holder: SK40 5-axis machining center | HEDELIUS - RS605 K IC equipped with tool changer, internal coolant supply (50 bar), zero-point clamping system, and chip conveyor. The machine has only 7,863 spindle hours. A comprehensive tool package is included in the scope of delivery. The machine is in well-maintained condition. Cpodpfjwlvrasx Aduet Please refer to the original order confirmation attached to the offer for further equipment details. #Tags: RS605 K IC 40 | RS-605 | RS 605

Kondisi: siap digunakan (bekas), Swing diameter over bed/cross slide: 570mm/420mm, turning diameter: 420mm, turning length: 635mm, travel X/Z: 220mm/635mm, spindle speed: 5,000 rpm, spindle bore: 79mm, max. bar diameter: 65mm. Tool stations: 12, driven tools: 6, tool holder: VDI 30, rapid traverse X/Z: 24m/30m/min. Machine dimensions X/Y/Z: approx. 3500mm/2500mm/2000mm, weight: approx. 4,500kg. An on-site inspection is possible. Cedpfx Aov Uqcgeduopt