Mesin bubut CNC

GILDEMEISTER MF 65

Kondisi: bekas, Tahun pembuatan: 1998, jam operasional: 97.593 h, Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan: 65 mm, lubang spindel: 79 mm, kecepatan spindel (maks.): 4.500 rpm, kecepatan spindel (min.): 25 rpm, en-GB Dwedpfx Aowym Nfoayec

Kondisi: baik (bekas), Tahun pembuatan: 1997, - Kontrol: SIEMENS SINUMERIK 840-C - Diameter batang maks.: 65 mm - Sumbu-C - Kecepatan spindle utama: 31 - 6.300 rpm - Revolver 1: 8 posisi, 4 di antaranya digerakkan - Revolver 2: 8 posisi, 4 di antaranya digerakkan - Kecepatan alat bergerak: 4.000 rpm - Kedua revolver dengan pendinginan internal - Sistem tekanan tinggi - Konveyor serpihan - Bar feeder IRCO SiMag 65 Djdpfsxa Epbsx Aayswc - Panjang batang maks.: 3.200 mm Dimensi PxLxT: - Mesin: 3.400 x 1.700 x 1.800 mm - Bar feeder: 4.000 x 1.000 x 1.400 mm - Konveyor serpihan: 3.000 x 1.100 x 1.600 mm Berat total: sekitar 6.000 kg

Kondisi: baik (bekas), Tahun pembuatan: 1999, Gildemeister MF Twin 65, tahun pembuatan 1999, kontrol Siemens 840 D, perjalanan X/Z 190/555 mm, 1 sumbu Y +/- 40 mm, 2 turret masing-masing 12 posisi, alat bertenaga, dudukan VDI 30, sumbu C, kecepatan spindle hingga 6.000 rpm, kapasitas batang maksimal hingga 65 mm, feeder batang termasuk namun sudah tidak terpasang pada mesin. Dwsdpfx Aasw Swcxoyec

Kondisi: baik (bekas), Tahun pembuatan: 1999, jam operasional: 140.810 h, Fungsionalitas: berfungsi sepenuhnya, Gildemeister MF SPRINT 65 Machine No.: 07810000801 Control: SINUMERIK 840 C Year of manufacture: 1999 Operating hours: 140,810 Irco ILS short bar loader Annual maintenance by DMG, last service on 08.07.2024: - Linear guideways, thrust bearings, ball screws (KGT) and locknuts for X1 axis replaced - Linear guideways, thrust bearings, ball screws (KGT) and locknuts for Z1 axis replaced - Linear guideways, thrust bearings, ball screws (KGT) and locknuts for X2 axis replaced - Linear guideways, thrust bearings, ball screws (KGT) and locknuts for Z2 axis replaced - All telescopic cover wipers replaced - Safety window for machining area door replaced - All feed timing belts and the timing belt for the sub spindle drive replaced - Tool drive 1 dismantled, disassembled, cleaned and new bearings fitted - Main spindle fan filter mat replaced, coolant valves for turret 1 and 2 replaced - Collet chucks of main spindle and sub spindle dismantled and cleaned Dwsdpfju Dg Ubex Aayec - Machine geometry and working area re-measured and re-adjusted - Hydraulic filter cartridges replaced, pneumatic filter replaced Technical data: see attachment The machine can be inspected under power Price: €25,000 (negotiable) This offer is non-binding and subject to change. Technical data and equipment are subject to prior sale and errors. Used machines are purchased as seen, with no warranty claims. Delivery ex works, packaging and insurance not included unless otherwise agreed. Price is excluding legally applicable VAT. Payment, as customary with used machines, to be made prior to loading.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, jam operasional: 65.543 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 501637, kecepatan rotasi (maks.): 4.500 rpm, Diameter batang (maks.): 65 mm, jumlah slot dalam magazin alat: 16, Perlengkapan: dokumentasi / manual, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Control System: Sinumerik 840C Bar feeder: Irco RBK 7212, year of manufacture 1999 Bar length: 1 m Bar diameter/spindle bore: 65 mm Spindle Main spindle: Hainbuch chuck Sub-spindle: 3-jaw chuck Main drive Power output: 28 / 21 kW Speed range: 25 – 4,500 rpm Torque: 320 / 240 Nm Feed rate for thread cutting: max. 10 m/min C-axis speed: 120 rpm C-axis torque (holding torque): 180 Nm Dedpfxjwkp Ifo Aayewc Tool turret Number of tools: 8 Shank diameter to DIN 69880: 30 mm Number of driven tool stations: 4 Power output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Tool turret 1 speed: max. 4,000 rpm Tool turret 2 speed: max. 4,000 rpm Slide 1 Cross travel / longitudinal travel: 155 / 280 mm Rapid traverse speed X/Z: 22.5 / 22.5 m/min Feed force X/Z: 900 / 900 daN Ball screw pitch X: 15 × 25 mm Ball screw pitch Z: 15 × 32 mm Slide 2 Cross travel / longitudinal travel: 82 / 120 mm Rapid traverse speed X/Z: 22.5 / 22.5 m/min Feed force X/Z: 900 / 900 daN Ball screw pitch X/Z: 15 × 25 mm MACHINE DETAILS Operating hours: 65,543 h Dimensions incl. bar feeder and chip conveyor (L×W×H): approx. 6 × 2 × 2 m Weight: approx. 6.5 t Operating voltage: 50 Hz, 400 V EQUIPMENT - Finished parts catcher - Cooling system - Chip conveyor - Documentation - Various guide tubes for the bar feeder - including 2 tool holders

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 501628, kecepatan spindel (maks.): 4.500 rpm, jarak pergerakan sumbu X: 155 mm, jarak gerak sumbu Z: 280 mm, Diameter batang (maks.): 65 mm, diameter spindel: 79 mm, Machine package: 2 machines = 1 x operational machine + 1 x parts carrier TECHNICAL DETAILS Bar diameter (standard): 65 mm Main spindle Spindle nose (flat flange): 140h5 mm Spindle bore diameter: 79 mm Draw tube diameter: 68 mm Bearing diameter (front bearing): 120 mm Main drive Maximum drive power (40%/100% duty cycle): 28 / 21 kW Speed range: 25 - 4,500 rpm Maximum torque (40%/100% duty cycle): 320 / 240 Nm Feedrate for thread cutting (max.): 10 m/min C-axis rotational speed: 120 rpm C-axis torque (holding torque): 180 Nm Slide 1 Cross travel/ longitudinal travel: 155 / 280 mm Rapid traverse speed (X/Z): 22.5 / 22.5 m/min Feed force (X/Z): 900 / 900 daN Ballscrew pitch (X Ø X): 15 x 25 mm Ballscrew pitch (X Ø Z): 15 x 32 mm Slide 2 Cross travel/ longitudinal travel: 82 / 120 mm Rapid traverse speed (X/Z): 22.5 / 22.5 m/min Feed force (X/Z): 900 / 900 daN Ballscrew pitch (X Ø X/Z): 15 x 25 mm Tool turret Number of tools: 8 Tool holder: Shank Ø according to DIN 69880 Number of driven tool stations: 4 Maximum power (40%/100% duty cycle): 7.6 / 4.6 kW Maximum torque (40%/100% duty cycle): 24 / 14.7 Nm Maximum speed (tool turrets 1 and 2): 4,000 rpm Sub spindle Clamping diameter (with collet): 42 mm Clamping diameter (with 3-jaw chuck): 65 mm Spindle nose diameter (flat flange): 120 mm Positioning system: infinitely variable indexing MACHINE DETAILS Overall length (with chip conveyor): 3,500 mm Overall height (with control cabinet): 1,625 mm Dwodpfsvviwxjx Aayec Overall width (with control cabinet): 1,750 mm Machine weight incl. control cabinet: 5,000 kg Weight of integrated bar magazine: 900 kg Hydraulics Capacity: 9.8 l Pump output: 1.1 kW Coolant system Capacity: 160 l Pump output: 1.65 kW Flow rate at 8 bar: 25 l