Mesin bubut siklus

GILDEMEISTER NEF 320

Kondisi: baik (bekas), Tahun pembuatan: 2000, jam operasional: 21.594 h, Fungsionalitas: berfungsi sepenuhnya, Gildemeister NEF 320 mesin bubut CNC teach-in Heidenhain Manual Plus Tahun pembuatan: 2000 Jam operasi mesin: 21.594 Diameter putar maks. di atas rangka: 320 mm Diameter putar maks. di atas eretan: 150 mm Fodpfsyh Hg Nox Ap Hjpi Panjang pembubutan maks. antara center: 750 mm Lubang spindle maks.: 50 mm Motor: 9 kW Kecepatan putar: 10-4.000 rpm Chuck Rota-S Plus Sistem penjepitan Multifix dengan dudukan pahat Dokumentasi dan perlengkapan Mesin dalam kondisi ON untuk inspeksi

Kondisi: bekas, CNC cycle-controlled lathe HARRISON Alpha 400 Plus Machine No. P30180/150 Year of manufacture: 1998 Centre distance: 1250 mm Swing over bed: 400 mm Centre height: 200 mm Swing over cross slide: 245 mm Swing in gap: 585 mm Bed width: 313 mm Cross travel (X-axis): 250 mm Fjdpfx Apsh Hvk Ae Hepi Tailstock quill diameter: 73 mm Tailstock quill stroke: 140 mm Tailstock quill taper: MT 5 Spindle bore: 54 mm Spindle nose size: Camlock D1 size 6 Spindle speed: 20-2500 rpm Spindle speed range (Step 1): 15-275 rpm Spindle speed range (Step 2): 35-795 rpm Spindle speed range (Step 3): 110-2500 rpm Feed rate X and Z: 0.03 - 0.6 mm/rev. Rapid traverse X-axis: max. 2000 mm/min Rapid traverse Z-axis: max. 4000 mm/min Thread cutting function: Metric / Inch / Diametral / Module Spindle drive power: 7.5 kW Electrical connection: 400 V, 50 Hz, 23.5 kVA - Cycle control Harrison Alpha / GE FANUC – language in French (France) - Automatic gearbox range switching in 3 steps (15-275, 35-795, 110-2500 rpm) - Electronic handwheels with various scaling factors (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm Type CSN, 1 set soft top jaws - MULTIFIX quick-change toolpost size B with 2 holders - 1 live center - 1 quick-release drill chuck RÖHM, 3-16 mm - Hinged chuck guard - Hinged work area safety doors - Chip tray with coolant device under the machine bed - Control cabinet attached to the machine - RS 232 interface Required floor space (L x W x H): 2600 x 1450 x 1550 mm Weight: 1950 kg good condition

Kondisi: bekas, Tahun pembuatan: 2003, Mesin Bubut DMG Tipe NEF 320 K Kondisi: Bekas Tahun Pembuatan: 2003 Kontrol: SINUMERIK 810DE-L CCUO Siklus untuk pembubutan konis dan pemrosesan ulir Data Teknis Diameter ayun di atas ranjang: 320 mm Diameter ayun di atas carriage: 150 mm Chuck: 200 mm Lintasan lintang: 150 mm Penggerak umpan AC: 4 m/menit Spindel utama: Ukuran 6 Lubang spindel: 52 mm Konektor spindel: MK 6 Diameter bantalan depan spindel: 85 mm Daya penggerak: 7 kW Torsi maksimum: 320 Nm Kisaran kecepatan: 14 - 3550 rpm Tingkat transmisi: 2 Pemegang alat: Multifix Ukuran B Pinol: 70 mm Stroke pinol: 120 mm Konektor pinol: MK5 Dimensi Panjang / Lebar: 2600 mm / 1440 mm Berat: ca. 1440 kg Fpsdpfxoyrggmo Ap Hoi

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2003, Mesin Bubut Universal GILDEMEISTER NEF 320 K Fsdjxn Ar Aopfx Ap Hepi Dengan kontrol Siemens SINUMERIK 810 DE (SIMATIC PANEL TOUCH SCREEN) Tahun pembuatan: 2003 Lubang spindle: 52 mm Jarak antara senter: 750 mm Diameter kerja di atas tempat tidur: 320 mm Diameter kerja di atas support pelana: 150 mm Panjang lintasan: 185 mm Kisaran putaran: 14 – 3550 rpm, tanpa tingkat Dilengkapi dengan aksesoris berikut: Pelindung geser dengan pencahayaan dalam Pemegang alat Multifix dengan 2 insert Chuck 3 rahang SCHUNK ROTA plus Ø 200 mm 2 set rahang lunak tambahan Sistem pendingin cairan Pistol pembersih serbuk 6 buah kaki mesin Manual operasi Mesin dalam kondisi sangat baik!

Kondisi: bekas, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore 127 mm Workpiece spindle taper MT5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivelling 360° Grinding headstock swivelling 180° ± Grinding spindle speeds 1500, 1700, 2200 rpm Plunge feed: incremental 0–9.99 mm/Ø Fedpfx Apeuxfupo Hjpi Plunge feed: continuous 0–9.99 mm/Ø Table swivelling ±8° Longitudinal table travel 1100 mm Table speed 0.02–6 m/min Workpiece weight between centres 130 kg Cross travel max. 270 mm Workpiece weight max. (flying) 130 kg incl. clamping Internal spindle mounting 80 mm Tailstock quill mounting MT3 Quill travel 30 mm Total power requirement 6.5 kW Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Photo shows a previously delivered machine. -The touch panel operation is extremely user-friendly. -The icons on the control panel are virtually identical to the original control, so no retraining is required. -Diagnostic function with display of PLC messages and digital I/Os. -Dressing function can be extended or modified to customer requirements. -Workpiece spindle oriented stop available on request. -New maximum infeed amount: 40 mm, extendable upon request. -Digital display on 2 axes. X-axis resolution 0.5 µm. Options: -Encoder with digital display on the workpiece headstock -Encoder with digital display on the grinding headstock (no height adjustment with spindle possible) -New stable internal grinding attachment diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for grinding spindle Includes: -Operating tools -Clamping tube for chuck Further accessories available upon request. The machine is equipped with an electronically controlled feed system in the X-axis with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile applications in production for external and internal cylindrical grinding, or for external, face and internal grinding in a single setup of individual parts. Available options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measuring control At the present time, the machine tool does not comply with the essential safety and protection requirements as specified in the BetrSichV 2015. The required minimum safety objectives must be determined by a risk assessment in accordance with the BetrSichV.

Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), Diameter lingkaran di atas alas/sadel: 320mm/150mm, tinggi pusat: 160mm, jarak antar pusat: 750mm, panjang putar maks.: 740mm, langkah X/Z: 185mm/700mm, diameter chuck: 200mm, kecepatan putar: 4000 rpm, rapid traverse X/Z: 5m/10m/menit, jumlah stasiun alat: 8, langkah pinol kepala lepas: 120mm, diameter pinol kepala lepas: 60mm, dimensi mesin X/Y/Z: sekitar 2300mm/1500mm/1700mm, berat: sekitar 2000kg, kontrol: Heidenhain. Dokumentasi tersedia. Inspeksi di lokasi dimungkinkan. Fpodezdum Dopfx Ap Hsi

Kondisi: bekas, 1 Fpjdpfeyxnugox Ap Hoi

Kondisi: bekas, Tahun pembuatan: 1995, TORNADO 200, tahun produksi 1995 Sistem kontrol: GE FANUC Series O-T Diameter pemesinan maksimum: 254 mm Panjang pembubutan maksimum: 400 mm Pergerakan sumbu X: 215 mm Z: 400 mm Kecepatan spindle maksimum: 3500 rpm Daya motor spindle: 18,5 kW Fpodpfxoua Uyuj Ap Hei Tailstock Sistem alat: VDI 40 Kepala revolver: 12 posisi Dimensi mesin panjang: 2455 mm lebar: 1420 mm berat: 3000 kg

Kondisi: bekas, Tahun pembuatan: 2003, msk-tr-0001 Fpjdsyutucspfx Ap Hei

Kondisi: bekas, Tahun pembuatan: 2001, translation_001 Fsdpfjyqtdisx Ap Hspi

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 16.000 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 750 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 520 mm, gerak cepat sumbu X: 24 m/menit, pergeseran cepat sumbu Y: 24 m/menit, pergerakan cepat sumbu Z: 24 m/menit, produsen pengendali: Siemens, model controller: 840D, diameter meja putar: 800 mm, kecepatan spindel (maks.): 14.000 rpm, pasokan pendingin: 20 batang, tegangan masuk: 400 V, DMU 70 3+2 Sumbu Mesin sedang dalam proses overhaul. Spindel baru Rel pandu sumbu Y & Z baru Pelindung lipat Kaca pengawas Diukur dengan BallBar termasuk protokol Siemens 840D dengan Shopmill - Handwheel Spindel SK40 14.000 rpm Penukar alat 30 posisi Pendingin internal 20 bar Tangki dengan filter sabuk 600l Konveyor serbuk Atap kabin Probe pengukur Pistol pembilas Mode operasi 4 Dokumentasi Fjdpfxsyx Am Ro Ap Hspi Tersedia mulai 04/2026

Kondisi: bekas, Tahun pembuatan: 1999, de-01 Fsdpfxew Syd Se Ap Hjpi

Kondisi: hampir baru (bekas), Tahun pembuatan: 2001, Gildemeister NEF 320 K cycle-controlled lathe with Siemens Sinumerik 810 DL control, year of manufacture 2001, very good original condition Technical Data: - Year of manufacture: 2001 - Swing diameter over bed: 320 mm - Swing diameter over cross slide: 150 mm - Center distance: 750 mm - Cross slide travel: 185 mm - Feed rate X: 4 m/min - Feed rate Y: 4 m/min - Rapid traverse X: 8 m/min - Rapid traverse Y: 10 m/min - Spindle nose: DIN 55027 size 6 - Spindle bore: 52 mm - Drive power 100%: 7 kW - Speed range: 14–3550 rpm (2 steps) - Tailstock quill diameter: 70 mm Fedpfswx Rbpsx Ap Hepi - Tailstock quill stroke: 120 mm - Tailstock quill taper: ISO MK 5 - Dimensions: 2600 x 1440 x 1440 mm Machine weight approx.: 2.0 t Accessories and equipment: About the machine: For sale is a Gildemeister NEF 320 K lathe with cycle control, year 2001, in very good original condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high spindle speeds, the Gildemeister operates very quietly. This newer generation of lathes is highly user-friendly, allowing the production of ground-quality surfaces. The machine comes from the training workshop of a large company. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, jam operasional: 100 h, kecepatan spindel (maks.): 5.000 rpm, tinggi total: 1.800 mm, berat keseluruhan: 2.200 kg, produsen pengendali: FANUC, model controller: 31t- Model B, jumlah sumbu: 3, This 3-axis EMCO MaxxTurn 65 SMY was manufactured in 2014 and features a robust FANUC 31i B control system and a double spindle arrangement with C and Y axes for complex machining operations. Equipped with a 12-position tool turret and a bar feeder with a capacity of 65 mm diameter and 3200 mm length, this machine is ideal for precision turning and milling applications, providing a comprehensive solution for modern metalworking. Contact us for more information about this machine. Additional Equipment • Automatic bar loader with adjustable part length and bar diameter • Remnant extraction system • Polyurethane plastic guide channel • Longitudinal movement displacement system Advantages of the Machine Fodpfx Apjx D H Sfo Hepi Qualitative Machine Advantages • No spindle reduction required Technical Machine Advantages • Cooling: Thermo-compensation unit • Axes: C axis and Y axis • System: Linear guideway system, digital drive system • PART CATCHER: Pneumatically operated finished part catcher for gentle unloading of finished parts. Finished parts are conveyed into a collection box (standard) or onto a conveyor belt (optional). Max. finished part length: 175 mm, max. finished part diameter: 65 mm. • Tool system: 12-position tool turret, VDI30 radial • Driven tools: up to 12 driven tools • Sub spindle speed range: 0-7000 rpm • Bar length capacity: 1200 - 3200 mm • Bar passage diameter: 20 - 65 mm • Feed rate: 0 - 627 mm/sec • Turning length: 650 mm Additional Information Control unit: Integrated PLC Features: Fully automatic work cycle, monitoring and fault diagnosis (display output) Tools Max power: 6.7 kW Max torque: 25 Nm Speed range: 0-5000 rpm C-axis: Available Media Power supply: 200/220/400 V AC Compressed air requirement: Min. 7 bar Air consumption: 45 L/min Installation position (mounting) The installation kit includes vibration-dampening, height-adjustable leveling pads and mounting brackets. Machine history Note: Machine as new with only 100 operating hours Dimensions Machine depth 4500 mm