Mesin bubut terkendali siklus

Gildemeister NEF 320

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 150 mm, lubang spindel: 51 mm, panjang pembubutan: 750 mm, diameter pembubutan: 320 mm, gerak cepat sumbu X: 8 m/menit, pergerakan cepat sumbu Z: 10 m/menit, kecepatan spindel (min.): 10 rpm, kecepatan spindel (maks.): 4.000 rpm, panjang total: 2.450 mm, lebar total: 1.668 mm, tinggi total: 1.825 mm, jarak pergerakan landasan silang: 150 mm, berat keseluruhan: 2.000 kg, diameter chuck tiga rahang: 200 mm, jarak gerak sumbu Z: 700 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Mesin masih dalam kondisi kerja yang baik dan dapat dilihat beroperasi dengan daya listrik. Cedpfx Aboy Iwhbjbsgt Opsi & aksesori tambahan: - Chuck Bison 3 rahang Ø200mm - Berbagai sleeve adaptor MK - Chuck bor - Dokumentasi asli Berat & dimensi: - 2000 kg - 2450 x 1668 x 1825 (P x L x T)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, jam operasional: 19.600 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.200 mm, jarak gerak sumbu Z: 1.500 mm, produsen pengendali: Heidenhain, model controller: 530, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, mesin dalam kondisi baik Cgjdoytt Elspfx Abbet 5 sumbu simultan Meja putar: 1700 mm Beban meja: 6 hingga 9 ton Jam spindle: 9000 jam

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Year of manufacture: 2004 Sauter 8-position turret VDI 20 + driven tools at all stations Main spindle holding brake C-axis with interpolation Reinforced coolant pump: 2.3 bar / 28 l/min Control: Heidenhain MANUAL PLUS (cycle control) Monitor: 10.4" TFT VGA colour screen Working Area & Capacity Swing diameter: 320 mm (over bed) / 150 mm (over cross slide) Centre distance: 750 mm Cross travel: 185 mm Spindle bore: 56.6 mm Spindle nose: Size 6 (to DIN 55027) / Taper MK 6 Drive power (AC): 9 kW (at 100% duty cycle) Max. torque: 410 Nm Speed range: 20 – 4,000 rpm (in 2 gear stages) Stage 1: 20 – 1,000 rpm Stage 2: 40 – 4,000 rpm Feed & Axes Rapid traverse (X/Z): 8 / 10 m/min Cjdpfsy Dckajx Abbsgt Feed rate: 5 m/min Feed force: 300 daN (X) / 600 daN (Z) C-axis: Interpolating (option included) Tool Carrier & Tailstock Turret: 8-position disc turret (Sauter), all stations powered Driven tool speed: up to 6,000 rpm (3.8 kW) Tool system: VDI 20 (DIN 69880) Tailstock: quill diameter 70 mm, stroke 120 mm, taper MK 5 Dimensions & Capacities Dimensions (LxWxH): approx. 2,600 x 1,915 x 1,730 mm Weight: approx. 2,200 kg Coolant tank: approx. 70 litres Fixed steady rest with rollers, guiding diameter 10–115 mm Travelling steady rest with rollers, guiding diameter 10–115 mm Three-jaw chuck Schunk Rota Splus 200-52 J 6, high precision Quick-clamping chuck with lever, SSF 40/6 Ortlieb, collet 173 E Preparation for faceplate operation, including speed monitoring with separate adjustable speed control. Tooling equipment: fixed tool holders and driven tool holders Jaws / hard and soft Collets 173 E The machine was used for single-part production in prototype manufacturing. Very low spindle hours Immediately available.

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, Gildemeister NEF 320 / Mesin Bubut Siklus, Tahun pembuatan: 1999, Kontrol: Manual Plus, Cgodpfjy Ev I Uox Abbot Jarak pusat: 750 mm, Diameter ayun di atas tempat tidur: 320 mm, Kecepatan putaran spindle hingga 4.000 rpm, 2 tingkat transmisi, Pemegang alat Multifix, Tailstock, 2 lunette, Aksesoris,

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 690 mm, lubang spindel: 150 mm, diameter pembubutan: 1.040 mm, diameter pembubutan di atas carriage atas: 690 mm, tinggi pusat: 500 mm, lebar di tengah: 2.000 mm, kecepatan spindel (maks.): 5.000 rpm, jarak pergerakan sumbu X: 160 mm, jarak gerak sumbu Z: 380 mm, saluran batang: 55 mm, Centre height: 500 mm Distance between centres: 2,000 mm Maximum turning diameter On cross-slide: 690 mm Over bed: 1,040 mm In natural gap: 1,070 mm Bed width (hardened guideways): 670 mm Gap length: 480 mm Gap length in front of platform: 320 mm CARRIAGE Bed guide length: 1,020 mm Cross-slide travel: 640 mm Top-slide travel: 360 mm SPINDLE Spindle nose: ASA 15’’ Spindle bore diameter: 150 mm Front bearing size NN: 200/310/82 mm Rear bearing size NNU: 190/260/69 mm Internal Morse taper in reduction sleeve: No. 6 Number of spindle speeds: 24 Speed range: 4 – 800 rpm THREAD CUTTING Total threads: 398 Metric threads: 0.5 – 224 mm Module threads: 0.25 – 11 mod. Whitworth threads: 56 – 1/8 TPI DP (Diametral Pitch) threads: 112 – 1/4 DP FEEDS Number: 108 Longitudinal, cross, and top-slide: 0.05 – 22.4 mm/rev RAPID TRAVERSE Longitudinal, cross and top-slide: 2,500 mm/min Longitudinal return: 5,000 mm/min TAILSTOCK Quill diameter: 130 mm Quill Morse taper: No. 6 Quill travel: 420 mm STEADY RESTS Bed steady rest capacity: 140 – 500 mm Carriage steady rest capacity: 40 – 350 mm PERMISSIBLE LOAD Overhang: approx. 1,500 kg Between centres, without steady rest: approx. 5,000 kg Between centres, with steady rest: approx. 6,000 kg Cedsyhhuwspfx Abbjgt Machine weight: approx. 7,800 kg

Kondisi: perlu perbaikan (bekas), Tahun pembuatan: 2002, Fungsionalitas: tidak berfungsi, panjang pembubutan: 750 mm, diameter ayun di atas peluncur melintang: 320 mm, jenis arus masuk: tiga fasa, Kami menawarkan mesin bubut Gildemeister NEF 320 bekas ini – tipe siklus, tahun pembuatan 2002. Kontrol: Heidenhain 4110 Kontrol tidak dapat menyala, pesan kesalahan lihat pada foto. Disket data mesin tersedia. Kondisi lainnya tidak diketahui karena berasal dari penutupan usaha seorang pembuat model. Mesin masih terhubung listrik. Cgodpfx Asypwhvjbbst Pemindahan dengan crane ke truk Anda memungkinkan.

Kondisi: bekas, 1 Codpfjyxnugox Abbogt

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, daya motor spindle: 45.000 W, tinggi total: 2.120 mm, berat keseluruhan: 11.500 kg, produsen pengendali: SIEMENS, model controller: 810 D, panjang produk (maks.): 5.400 mm, jumlah sumbu: 2, This Weiler E120x3000 was manufactured in 2001. It features a center distance of 3000 mm, a center height of 600 mm, and a swing diameter over bed of 1200 mm. The spindle bore is 165 mm, and it is equipped with a robust main drive rated at 45/37 kW. This machine is ideally suited for heavy-duty turning work and comes with accessories such as a chuck, a faceplate, and a steady rest. Contact us for further information about this machine. • Working area: • Distance between centers: 3000 mm • Center height: 600 mm • Swing diameter over bed: 1200 mm • Swing diameter over cross slide: 830 mm • Cross slide travel: 590 mm • Bed carriage guide length: 860 mm • Turning tool cross-section (H x W): 40 x 40 mm • Tool holder: Parat size 4 Codsx D Hz Topfx Abbegt • Spindle: • Spindle nose DIN 55027 / 55026, size 15 • Spindle bore: 165 mm • Main spindle taper: metric 171 • Main drive: • Drive power (60% / 100% duty cycle): 45 / 37 kW • Max. spindle torque: 8000 Nm • Speed range gearbox stage 1: 1-280 rpm • Speed range gearbox stage 2: 4-900 rpm • Tailstock: • Quill diameter: 140 mm • Quill stroke: 300 mm • Quill taper: MK 6 • Dimensions and weight of the machine: • Overall length: 5400 mm (without chip conveyor), 6535 mm (with chip conveyor) • Overall width: 2600 mm • Overall height: 2120 mm • Machine weight: 11,500 kg • Overhaul Work Performed: • Hardening and grinding of all bedways • Grinding of tailstock ways • Overhaul of the complete bed and cross slide assembly (grinding/scraping of all guides) • Renewal of bed carriage slideways • Renewal or shimming of keyways and ground guides • Replacement of all wipers • Replacement of all belts • Overhaul of the main spindle assembly in the headstock • Renewal of the X-axis including bearings • Renewal of the Z-axis including bearings • Overhaul of the tailstock quill (regrinding MK 6 taper), replacement of spindle and nut • Adjustment of the tool system • Replacement of the main spindle motor • Inspection of auxiliary motors (X and Z axis) • Refurbishment of existing safety guards (sliding hood/chuck guard) • Replacement of all rotary, cam, and limit switches • Replacement of spindle and handwheel encoders • Renewal of flexible cables and coolant hoses in the working area • Replacement of centralized lubrication system • Renewal of energy chains • Painting as specified (standard structural basalt and light gray) • Assembly and geometric inspection of the machine according to DIN 8605 Additional Equipment • 1x used 630 mm diameter chuck with various jaws • 1x used 1100 mm diameter faceplate • 1x used steady rest, max. 300 mm diameter • 1x used chip conveyor

Kondisi: baik (bekas), Tahun pembuatan: 2002, diameter putar di atas sled silang: 150 mm, lubang spindel: 52 mm, panjang pembubutan: 750 mm, diameter pembubutan: 320 mm, lebar di tengah: 750 mm, gores kuas bulu: 120 mm, diameter quill: 70 mm, tinggi pusat: 160 mm, kecepatan spindel (min.): 20 rpm, kecepatan spindel (maks.): 4.000 rpm, panjang total: 2.800 mm, lebar total: 1.820 mm, tinggi total: 1.750 mm, daya motor spindle: 9.000 W, berat keseluruhan: 2.000 kg, drehmaschine-top-zustand Csdpfx Asyymx Tsbbjgt

Kondisi: bekas, Tahun pembuatan: 2003, Mesin Bubut DMG Tipe NEF 320 K Kondisi: Bekas Tahun Pembuatan: 2003 Kontrol: SINUMERIK 810DE-L CCUO Siklus untuk pembubutan konis dan pemrosesan ulir Data Teknis Cgodpfjyrggmjx Abbst Diameter ayun di atas ranjang: 320 mm Diameter ayun di atas carriage: 150 mm Chuck: 200 mm Lintasan lintang: 150 mm Penggerak umpan AC: 4 m/menit Spindel utama: Ukuran 6 Lubang spindel: 52 mm Konektor spindel: MK 6 Diameter bantalan depan spindel: 85 mm Daya penggerak: 7 kW Torsi maksimum: 320 Nm Kisaran kecepatan: 14 - 3550 rpm Tingkat transmisi: 2 Pemegang alat: Multifix Ukuran B Pinol: 70 mm Stroke pinol: 120 mm Konektor pinol: MK5 Dimensi Panjang / Lebar: 2600 mm / 1440 mm Berat: ca. 1440 kg

Kondisi: bekas, Tahun pembuatan: 2006, en-GB: Technical Details: Swing diameter over bed: 500 mm Swing diameter over cross slide: 290 mm Turning length: 850 mm Centre distance: 850 mm Longitudinal travel (Z-axis): 900 mm Cross travel (X-axis): 260 mm Control: Manuaplus 4110 Spindle speed: 10 - 3000 / 2x steps rpm Spindle torque: 920 Nm Spindle bore: 70 mm Cross travel (X-axis): 8 m/min Longitudinal travel (Z-axis): 10 m/min Operating hours (power on hours): approx. 34,600 h Tailstock taper ISO: MK 5 Tailstock quill stroke: 180 mm Total power requirement: 24 kVA Machine weight approx.: 5.2 t Machine dimensions (LxWxH) approx.: 2.2 x 3.2 x 1.9 m Multifix tool holder size C 3-jaw chuck Ø 250 mm Chip tray Manual hour counter Live centre in tailstock Operation via control panel and monitor Accessories: 4-jaw chuck Ø 250 mm with inner jaws Various chuck keys Machine lighting 8x base plates 4x wedge lifters Various pairs of jaws 1x closed steady rest Ø 100 mm Cgedpfx Aowtct Hobbst

Kondisi: bekas, Tahun pembuatan: 2003, msk-tr-0001 Codpfxoyutucs Abbjgt

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2003, Mesin Bubut Universal GILDEMEISTER NEF 320 K Dengan kontrol Siemens SINUMERIK 810 DE (SIMATIC PANEL TOUCH SCREEN) Tahun pembuatan: 2003 Lubang spindle: 52 mm Jarak antara senter: 750 mm Diameter kerja di atas tempat tidur: 320 mm Diameter kerja di atas support pelana: 150 mm Panjang lintasan: 185 mm Kisaran putaran: 14 – 3550 rpm, tanpa tingkat Dilengkapi dengan aksesoris berikut: Pelindung geser dengan pencahayaan dalam Cedpfx Aexn Ar Aobbegt Pemegang alat Multifix dengan 2 insert Chuck 3 rahang SCHUNK ROTA plus Ø 200 mm 2 set rahang lunak tambahan Sistem pendingin cairan Pistol pembersih serbuk 6 buah kaki mesin Manual operasi Mesin dalam kondisi sangat baik!

Kondisi: baik (bekas), Tahun pembuatan: 1997, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 750 mm, jarak gerak sumbu Z: 750 mm, CNC control Heidenhain TNC426 30-position tool changer Electronic handwheel Chip conveyor Coolant system Technical details: X-axis travel 1000 mm Y-axis travel 750 mm Z-axis travel 750 mm Codjua S Hropfx Abbsgt Table size 1150 x 700 mm Spindle taper SK40 Spindle speed range 12000 rpm Number of tool stations in ATC 30 Machine weight approx. 10500 kg Technical data, accessories, and machine description are not binding.

Kondisi: bekas, Tahun pembuatan: 2001, translation_001 Cgodpfx Abeyqtdiobst