Mesin pembentuk gigi

GLEASON- PFAUTER 100 S

Kondisi: bekas, Tahun pembuatan: 2019, de-to-hu-it-lt Ijdpfx Ajy Hl Hijpaotk

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 65 mm, diameter pembubutan di atas alas geser: 520 mm, Mesin bubut utama dan tunda Itsdpfxsy A H Aks Apaok Merk: Heidenreich & Harbeck Tipe VDF Data Teknis Merek: Heidenreich & Harbeck Tipe: VDF Tahun pembuatan: tidak diketahui Kontrol: konvensional Jarak antara senter: 1500 mm Diameter putar di atas alas: 520 mm Lubang spindle: 65 mm Dimensi: P 3,60 x L 1,20 x T 1,50 m Berat mesin: sekitar 4 ton Perlengkapan - Tampilan digital 2 sumbu - Penggaris 1.500mm tidak tersedia Seluruh informasi tanpa jaminan. Demonstrasi dengan arus listrik dapat dilakukan kapan saja di ruang pamer kami.

Tahun pembuatan: 2019, jam operasional: 4.525 h, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 12, MASCHINE ZUM SCHÄLEN UND RICHTEN VON STÄBEN IM SET Die Ausrüstung befindet sich in einwandfreiem Betriebszustand und kann unter Strom besichtigt werden. Komplett modernisiert im Jahr 2019 (neue Mechanik und Elektronik) Arbeitsbereich: Ø 20 – Ø 80 mm Stablänge: 2,5 – 6,0 m Iedpfswqb Scjx Apajtk Bearbeitungstoleranz: ISO h9 (optional h8 möglich) Schäliefentiefe: bis zu 3,5 mm, abhängig vom Stahlsorte Stahlsorten: Kohlenstoffstahl, Wälzlagerstahl, Federstahl usw. Vorschubgeschwindigkeit: digital einstellbar 0,5 – 12 m/min Drehzahl des Schälkopfes: bis zu 1700 U/min Schneidwerkzeuge: zwei Sätze à 4 Messer mit automatischer digitaler Positionierung (Dreiecks- und Langmesser) Automatischer Ladetisch mit Stabzähler Zuführwalze mit motorisierter Höhenverstellung Einlaufandruckrollen – 4 vertikale Rollen mit umgekehrtem Gleichstrommotor Schälmaschine bestehend aus: - Vordere Führungseinheit - Schälkopf mit 4 Messern - Hintere Führungseinheit Stabausfahrwagen Hauptmotor und Getriebe Abdrückrollen am Auslauf – Twin-System Ablagetisch mit motorisierter Höhenverstellung Sammelbehälter mit Zähler und automatischer Sammlung der Fertigstäbe Hydraulikeinheit – komplett neu Schaltschrank – neu, zweiteilig ausgeführt.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, OEM – Marking Laser / Engraving Laser (with CO2 Laser Source) Itsdjpyg N Aopfx Apaek The integrated system features a 30-watt CO2 laser source with a wavelength of 10,060 nm. The marking area is approximately 140 x 140 mm; optional expansions up to 300 x 300 mm are available. No external cooling is required. Power supply: 110...240 VAC / 50 Hz. Applications include laser engraving and material removal. The control software, EzCad, is installed on the provided laptop. The software language is selectable (German, English). Optionally, the laser marker can be equipped with a manually adjustable Z-axis. The laser is prepared for integration into a superior system but can also be used as a stand-alone solution. For machine integration, interfaces for interlock, emergency stop, external laser control, etc. are available. We are happy to provide customer support based on individual requirements and consultation.

Kondisi: hampir baru (bekas), Manufacturer: Flender Type: K2S-2.5 Itedjg Stz Ajpfx Apaek Backstop: Yes Power: 78 kW Gear Ratio: 44.16:1 Input/Output Speed: 1,400 / 31.7 rpm Input Shaft Ø: 65 mm Output Shaft Ø: 140 mm

Kondisi: baik (bekas), Tahun pembuatan: 1993, Mesin gerinda permukaan ELB Tahun: 1993 Ijdpfx Apoygtiwsaetk Ukuran meja magnetik: 1500x550 mm Dengan turun otomatis Dengan alat pemotong batu gerinda Tangki pendingin tipe pita kertas Banyak batu gerinda

Kondisi: baik (bekas), Tahun pembuatan: 2005, Machine as per photos Condition: Very good, apart from a defective slot in the tool magazine. Tool holders included. Ijdpfx Apevf D Anoaotk

Tahun pembuatan: 2016, Kondisi: baru, 1 piece of overhauled, unused industrial bevel helical gear unit from ASUG. TGL 21815 All gearbox components have been replaced except for the housing! Jaw coupling: 800 mm (only one half available) Maximum torque: 27,829 Nm Gear ratio: i = 1:80 Maximum power: 51 kW Oil filling: 170 kg Input speed: n1 = 1400 rpm Output speed: n2 = 17.5 rpm Isdpegwlrdjfx Apaotk Weight: 1450 kg Shaft diameter d1: 65 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Total height h2: 925 mm Base length: 1170 mm !! Gear unit is not equipped with oil cooler !!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, kecepatan spindel (maks.): 8.000 rpm, jumlah sumbu: 9, This 9-axis TRAUB TNL 32 Swiss-type lathe was manufactured in 2014. It features a TX8i-s control system with a 64-bit RISC CNC/PLC processor, a TFT color display, and an electronic handwheel. The main spindle supports a 32 mm bar capacity, and the machine is equipped with a counter spindle featuring a C-axis. It comes with an upper tool turret with dual drive and a lower turret with nine tool holders. Consider the option of purchasing this TRAUB TNL 32 Swiss-type lathe. Contact us for further information. • Control: TRAUB TX8i-s CNC/PLC with 64-bit RISC processor and fiber optic PC; color TFT flat screen; electronic handwheel • Included software/extensions: Polyform (C-axis programming), Helical (3D Y-axis interpolation), Thread cutting without compensating chuck, Cut-off tool breakage monitoring, Cut-off part ejection monitoring, Axis disable, T-ATC • Main spindle: Motor spindle with hollow clamping system; 32 mm bar/bore; C-axis, max. speed 8,000 rpm • Max. stroke: 305 mm (L version) / 127 mm (K version) • Counter spindle: Partial hollow clamping, C-axis; cleaning unit mounted on the lower turret • Upper tool turret: X/Y/Z/H/B-axes; 10 tool holders; dual drive • Lower tool turret: X/Y/Z/H-axes; 9 tool holders; combined drive; independent counter spindle operation • Measuring/feedback: Linear glass scales on the X-axis (upper and lower turret); rotary encoders on C-axis Isdpsx D Drcsfx Apaetk • Backworking: 8-position backworking table with combined drive for up to 3 tools; prepared for internal coolant supply • Clamping: Clamping direction reversal mechanism and counter clamping pressure device on main and counter spindle • Coolant system: Standard system with 3-bar and 8-bar pumps (50 Hz) in a 500-liter tank; additional 28-bar pump (50 Hz), 19 l/min flow rate • Extraction: D 150 mm port for central extraction system Additional equipment • None indicated (no robot, bar loader, chip conveyor, or external automation listed)

Kondisi: sangat baik (bekas), Tahun pembuatan: 1991, 400 mm swing diameter O F F E R We can offer you, subject to prior sale and errors excepted, available ex stock, on a non-binding basis: WMW - GLAUCHAU Universal Internal Cylindrical Grinding Machine with Plunge Grinding Attachment Model: SI 6/1 AS-N x 315 Year of manufacture: 1991 _____ Internal grinding diameter range: 40 - 400 mm Max. grinding depth: 315 mm Max. external grinding diameter: 400 mm Max. workpiece weight: 630 kg Workpiece swing diameter with/without chuck guard: 500 / 600 mm Centre height above table: 360 mm 16-step workpiece spindle speeds: 40 – 400 rpm Workpiece spindle bore, approx.: 53 mm Workpiece headstock swivelling, max.: 30° Workpiece headstock transverse adjustment, max.: 400 mm Grinding spindle stock Z-feed: 70 mm Grinding spindle stock transverse adjustment, approx.: 100 mm Grinding head infeed, interval cycle: 0.001 – 0.025 mm/stroke Grinding head infeed, continuous: 0.1 – 1 mm/min Max. table travel: 630 mm Steplessly adjustable table speed: 0.1 – 8 m/min (10 m/min) Max. distance between workpiece headstock and grinding spindle: 1,250 mm Grinding spindle stock movement on table: 520 mm Grinding spindle drive approx.: 7.5 kW Total drive approx.: 17 kW - 380 V - 50 Hz Weight, approx.: 6,000 kg Accessories / Special Equipment: • Universal internal grinding spindle stock with program-controlled cycles for grinding cylindrical and conical bores with one or multiple diameters, external grinding, and face grinding of narrow faces • Plunge grinding attachment, hydraulically swivelling, with automatic cycles for grinding one or multiple faces as well as stepped faces simultaneously Itjdsxyllvspfx Apask • Electronic program control with large operator panel and ammeter for both grinding spindles • Belt-driven grinding spindle with built-in spindle and 5 separate interchangeable grinding spindles with various pulleys of differing diameters • Dressing units for both grinding spindles; large chuck guard on the workpiece headstock • HEIDENHAIN digital display for cross adjustment of the workpiece headstock • Comprehensive accessories including 4-jaw chuck approx. 520 mm, 3-jaw chuck approx. 380 mm, 3-jaw chuck approx. 130 mm, pulleys, spindle sleeves, grinding wheel holders, foot switch • Separate hydraulic unit, attached electrical cabinet, coolant system with magnetic separator Condition: Good to very good condition! Suitable for all grinding tasks! Please click here for a video of the machine: Delivery: Ex stock, immediate availability, FCA Metzingen Payment: strictly net – upon receipt of invoice