Gergaji potong dan gergaji mitre

Graule ZS 200 N 5 kW (neigbar)

Kondisi: baru, Tahun pembuatan: 2026, Crosscut and Mitre Saw, Type: ZS 200 N – 5 kW Motor Ljdji Dfidspfx Al Norp Includes machine stand, but without saw blade Machine can be tilted using handwheel and worm gear (at the rear) Saw blade diameter: 520 mm, blade bore: 50 mm Saw blade speed: 2800 rpm 400 Volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swiveled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm Saw can be swiveled to one side to approx. 25° for acute angles and tilted left up to 30° for flat cuts Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: baik (bekas), NHH lathe Model: 1N611N Swing over bed: 260 mm Swing over cross slide: 160 mm Spindle bore: 26 mm Turning length: 600 mm Digital readout Chuck diameter: 155 mm Spindle speed: 2000 rpm Dimensions: 150x85x155 cm (LxWxH) Lrodpfx Aloqgdkij Nsp

Kondisi: baru, Diameter 200 mm Lrodpfxshuxbro Al Nsp Height 105 mm Machine weight approx. 25 kg Required space approx. 400 x 280 x 150 mm

Kondisi: baru, Diameter 200 mm Height 105/265 mm Centre height 105 mm Lrodpfx Aoupxd Rel Nop Machine weight approx. 41 kg Required space approx. 400 x 330 x 310 mm

Kondisi: seperti baru (mesin pameran), Individual purchase is possible Lodpfxedwbk Re Al Norp

Kondisi: bekas, with mounted three-jaw chuck Table diameter: 200 mm Bore approx.: 18 mm Height: 100 mm Total height with chuck: 165 mm Width: 270 mm Length: 320 mm Lodpeda I Rvsfx Al Norp

Kondisi: baru, Tahun pembuatan: 2025, Cutting height at 90°: 200 mm Cutting height at 45°: 140 mm Cutting width at 90°: 420 mm Cutting width at 45°: 295 mm Mitre range horizontal: 45° - 90° - 25° Mitre range vertical: 60° - 90° - 30° Saw blade diameter: 520 mm Speed: 2800 rpm Lredpfx Aeiy Ry Ajl Njp Motor power: 5 kW Motor brake: yes Extraction port: 100 mm Weight: 490 kg

Kondisi: diremajakan ulang (bekas), en-GB: Complete retrofit Pressing force: 1,600 kN Installation height: 800 mm Stroke: 500 mm Table: 900 x 630 mm Ram: 750 x 450 mm Throat depth: 360 mm Ljdow S Uazjpfx Al Nsrp Downward speed: 200 mm Upward speed: 125 mm Machine height: approx. 3,500 mm Weight: approx. 7,000 kg Connection: 17 kW - A complete retrofit kit for unrestricted manual loading and unloading in compliance with EU directives and implementation of CE-compliant equipment, - New control cabinet with certified dual-channel electronic PLC safety control by Siemens (1512SP F or 1515F) for process control, featuring an integrated operator panel for the following operating modes: setup - two-hand, single stroke - two-hand, and foot operation (only in combination with BWS); manual lever operation is no longer possible, - Hydraulic safety block for monitoring the closing movement of the main cylinder, - Position-monitored directional valve for the up and down movement of the main cylinder ram, - Two-hand control unit with dual-channel monitoring of the two-hand synchronization at the press table (incl. 5m cable), - Replacement of the main and control pump motors, - Replacement of the main cylinder seals, - Fine filter with contamination indicator, - The press is equipped with an electronic travel measurement system (incl. teach-in function and display of the current ram position). This eliminates the need for a mechanical cam switch. Main control panel integrated in the control cabinet (mounted on the right side of the machine) - 12" touch panel - Control buttons and switches for operating modes and drives - USB interface for data exchange - Light curtain Option: Drawing cushion

Kondisi: bekas, en-GB: Technical details: Drilling capacity in steel (diameter): 30 mm Throat depth: 260 mm Drilling stroke: 160 mm Spindle taper: MT3 Feed rates: 0.1; 0.2; 0.3 mm/rev and manual Spindle speed: max. 1800 rpm, stepless Ledpfxsva Higj Al Nsrp Max. distance spindle/table: 750 mm Table clamping area: L: 280 x W: 355 mm Table rotatable: no Clamping table swivel: 360 degrees Drill table adjustment, vertical: 600 mm Column diameter: 130 mm Thread cutting: No Total power requirement: 1.1 kW Approx. machine weight: 570 kg Approx. machine dimensions (LxWxH): 0.9 x 0.9 x 1.9 m This machine is equipped with a cross table. Drilling table (LxW): 370 x 500 mm Attachment table (LxW): 420 x 750 mm, Clamping surface = 320 x 600 mm, cross traverse (X-axis) up to 250 mm possible Ejector with drift key Coolant system Accessories: Bench vice Machine feet

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, nomor mesin/kendaraan: 102940, WEINIG HYDROMAT H23 SYSTEM ELECTRONIC FEED FREQUENCY CONTROLLED (8 – 100 M/MIN). FEED MOTOR 22 KW 50MM SPINDLES WORKING WIDTH MAX. 230 MM WORKING HEIGHT MAX. 160 MM SHORT INFEED WITH 220MM TOP FEED ROLLERS BOTTOM 15KW 6,000 RPM, OUTBOARD BEARING, JOINTER READY RIGHT 11KW 6,000 RPM JOINTER READY LEFT 15KW 8,000 RPM JOINTER READY RIGHT 11KW 8,000 RPM JOINTER READY LEFT 15KW 8,000 RPM, JOINTER READY TOP 18.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 11 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY (STRAIGHT JOINTER) + OUTBOARD BEARING TOP 18.5KW 8,000 RPM OUTBOARD BEARING, JOINTER READY (STRAIGHT JOINTER) + OUTBOARD BEARING BOTTOM 22 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY 12X TOP FEED ROLLERS (2X 220MM + 10X 140MM) 7X BOTTOM FEED ROLLERS POSSIBLE TO ADD ADDITIONAL STRAIGHT / PROFILE JOINTERS AS NEEDED AUTOMATIC LUBRICATION SYSTEM FULL DOCUMENTATION INCLUDED MACHINE LENGTH 5.2M Lrsdpfx Alozd Tavs Nop