Gergaji bundar dan gergaji bundar

Graule ZS 200 N

Kondisi: baru, Tahun pembuatan: 2026, Crosscut and Mitre Saw, Type: ZS 200 N – 5 kW Motor Includes machine stand, but without saw blade Machine can be tilted using handwheel and worm gear (at the rear) Saw blade diameter: 520 mm, blade bore: 50 mm Hsdpfxoi Dfide Aa Dsnp Saw blade speed: 2800 rpm 400 Volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swiveled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm Saw can be swiveled to one side to approx. 25° for acute angles and tilted left up to 30° for flat cuts Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, 1 refurbished Paul slat separator, 2-lamella design, with fixed lamella on the right and movable lamella on the left (for left-handed machine). Total length: 5.50 m Total width: 850 mm Roller spacing: 500 mm Roller width: 790 mm Maximum wood length: 5.00 m Equipped with 8 driven spiral rollers and 3 driven smooth rollers. 11 rollers dismantled and reassembled with new ball bearings. Movable lamella mounted on 4 ball-bearing-supported supports, easily movable, with new roller chain and 11 new deflection pulleys. Robust sheet metal lining between all rollers. Hjdpfxotx A Sxs Aa Donp As-new condition

Kondisi: baru, Tahun pembuatan: 2026, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, Saw tiltable via handwheel and worm gear (rear) Saw blade diameter: 520 mm, blade bore: 50 mm Blade speed: 2800 rpm 400 volt / 5 kW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90°: 420 mm Cutting width at 45° (swiveled): 295 mm Hsdjk H Ic Uepfx Aa Donp Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm Saw can be swiveled on one side up to approx. 25° for acute angles and tilted to the left up to 30° TCT circular saw blade 520x4.0/2.8 x 50 mm, 60 ATB teeth, negative hook angle, for wood RLH-ST60 measuring length 6.0 m, mounting side: left Length stop / roller conveyor, heavy-duty version, Stop carriage adjustable from operator position via handwheel, electronic-digital measuring display, stop carriage pneumatically clamped, stop flap folds away to the rear, with steel rollers, 60 mm diameter, roller pitch 200 mm, 400 mm roller width, with 4 support legs and connector, total length: 6.7 m Surcharge for digital electronic display unit Type: FIAMA EP6 for 230-volt mains operation, with electric ON/OFF switch and socket. Powerful dark red LED display. Higher precision than the battery-powered crystal display RO-ST60 4.0 m long infeed roller conveyor Mounting side: right Heavy-duty version, steel rollers: 60 mm diameter, roller pitch: 200 mm 400 mm roller width, 3 support legs and connector Location: Ex stock 54634 Bitburg - Immediately available - Image: similar. Machine still in original packaging

Kondisi: bekas, Tahun pembuatan: 2008, Cutting height at 90°: 200 mm Cutting length: 410 mm Mitre range horizontal: 45° - 90° - 25° Mitre range vertical: 60° - 90° - 30° Roller conveyor / support table: no Hjdsy S Rrbepfx Aa Donp Saw blade diameter: 520 mm Speed: 2800 rpm Motor power: 5 kW Motor brake: yes Extraction port: 100 mm Machine length: Machine width: Weight: 300 kg

Kondisi: bekas, Tahun pembuatan: 2018, Delivery time approx. 5 months. Machine from a training facility – EXCELLENT condition, low operating hours (edge banding unit unused). Without tooling. Additional costs for dismantling / delivery / installation and commissioning / training. Includes Maestro 3D and Pro View. Hnjdsyuw Sropfx Aa Dop MORBIDELLI P200 Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm Edge banding – Made for You This CNC machining center is equipped with a rich selection of edge banding tools to meet all woodworking requirements. MAIN ADVANTAGES - Powerful, with advanced H80C edge-banding unit, drilling spindles with 8,000 rpm, and market-leading spindle technology, offering over 1,000 hours of maintenance-free operation - Superior and generously equipped; suction cups can be positioned and configured using the FLEX worktable to optimally suit requirements - Easier and more intuitive programming thanks to the integrated CAD-CAM module for edge banding technologies "MAESTRO EDGE" - Simple operation: lowered frame for full accessibility to the worktable, integrated control cabinet and vacuum pump, and no safeguarding elements required in the PRO SPACE configuration Base Structure: The base structure is a monolithic construction made from thick-walled steel, reinforced with welded box plates along the entire machine bed, delivering extreme rigidity. The bed design, with a broad base, is key to ensuring long-term precision and stability. The supporting frame features an exceptionally robust, monolithic steel base with heavy ribbing for outstanding stiffness. The exceptionally wide footprint was specially designed to provide stability to the machine, ensuring ongoing precision regardless of working conditions – the machine does not need to be anchored to the floor. The base forms a large and solid mounting surface for the mobile gantry: the machining unit is therefore provided with a balanced, stable, and resilient support, capable of withstanding high loads for superior performance and greater accuracy. The mobile gantry consists of a solid single-piece attached to the base, gliding on prism guides with recirculating ball-bearing carriages of the highest quality. The machining unit is mounted on it and travels along the Y and Z axes on prismatic guides with ball carriages. Movement of the lower mobile unit (X-axis) and the working unit along the bar of the mobile unit (Y-axis) is achieved via helical rack and pinion drive, providing increased tooth engagement for higher acceleration and greater axis speed (X and Y). The specially designed helical gearing ensures reduced wear of mechanical components and lower noise levels. The vertical Z-axis is driven by a recirculating ball screw, ensuring perfect balance under dynamic loads and supporting strong acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage for absolute machining quality.

Kondisi: bekas, Tahun pembuatan: 2000, translation-001 Hsdey S Rq Rjpfx Aa Denp

Kondisi: bekas, Tahun pembuatan: 1998, Cutting height at 90°: 200 mm Cutting height at 45°: 140 mm Cutting width at 90°: 420 mm Cutting width at 45°: 295 mm Mitre range horizontal: 45° - 90° - 25° Mitre range vertical: 60° - 90° - 30° Saw blade diameter: 520 mm Speed: 2800 rpm Motor power: 5 kW Motor brake: yes Hnsdsy Hqdaspfx Aa Dsp Extraction port: 100 mm Weight: 490 kg

Kondisi: bekas, Tahun pembuatan: 1991, Mesin bekas Tahun pembuatan: 1991 Otomatis penuh, posisi berdiri, Area pemotongan: 5.300 x 2.200 mm (lebar potong x tinggi potong), Diameter mata gergaji: 300 mm, Kontrol untuk pemotongan vertikal dan horizontal, dengan stopper lipat ALU dan penyangga tengah ALU, dengan perangkat scoring SUPER-CUT Hjdpfx Aaex Rr D Aj Denp Motor: 3 kW - 400 V Ketersediaan: segera Lokasi: Röllbach

Kondisi: baru, Tahun pembuatan: 2025, Cutting height at 90°: 200 mm Cutting height at 45°: 140 mm Cutting width at 90°: 420 mm Hedpfxeiy Ry Aj Aa Djnp Cutting width at 45°: 295 mm Mitre range horizontal: 45° - 90° - 25° Mitre range vertical: 60° - 90° - 30° Saw blade diameter: 520 mm Speed: 2800 rpm Motor power: 5 kW Motor brake: yes Extraction port: 100 mm Weight: 490 kg

Kondisi: baru, Tahun pembuatan: 2024, Cutting height at 90°: 200 mm Cutting length: 410 mm Hsdpsiuld Sefx Aa Djnp Mitre range horizontal: 45° - 90° - 25° Mitre range vertical: 60° - 90° - 30° Roller conveyor / support table: no Saw blade diameter: 520 mm Speed: 2800 rpm Motor power: 5 kW Motor brake: yes Extraction port: 100 mm Machine length: Machine width: Weight: 300 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jarak pergerakan sumbu X: 4.600 mm, jarak lintasan sumbu Y: 1.935 mm, jarak gerak sumbu Z: 275 mm, jumlah sumbu: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It features a large working area (X = 4600 mm, Y = 1935 mm, Z = 275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine is equipped with a vacuum system, a conveyor belt for chip removal, and liquid cooling. If you are looking for high-quality CNC machining capabilities, you should consider the Biesse Rover C9.50 machine, which we are offering for sale. Contact us for further information. Worktable and Clamping • 8 ATS panel holders (L = 1525 mm) and 24 sliding rails • Automatic positioning of the panel holders and sliding rails (EPS X-Y) • Pneumatic locking system, divided into 2 working zones in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right), pneumatic system • 4 removable central stops, stroke 140 mm (2 left + 2 right), pneumatic system • Sensor for detection of lowered stops • Pneumatic system for lifting rod supports • 6 lifting rod supports for easy loading (H = 74 mm modules) Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for standard vacuum system Processing Units and Configuration • Configuration C3-A1: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis processing unit • Flange for mounting units on a 5-axis interpolating machining head (units can only be used when the electric spindle is vertical) • Configuration C3-P2: • Additional Z-slide for rear processing units, controlled by an independent Z-axis • 16 vertical and 4 horizontal drilling spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, positioned in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle) Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional equipment • Additional overhauled 5-axis main spindle available • Conveyor belt for removing chips and scrap parts (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles or one electric spindle plus a liquid-cooled drilling head) Hsdpfx Aaex D H Hcs Donp Note: The technical data and descriptions are taken from the original order confirmation and are for information purposes only; they are not binding.

Kondisi: baru, Tahun pembuatan: 2022, en-001 Hsdpfx Aekwhmfoa Denp

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, daya nominal: 5 kW (6,80 hp), 5 kW, 7,5 HP Hnjdpodxw U Iofx Aa Djp Tinggi potongan: 200 mm Dapat dimiringkan hingga 60° ke kiri, hingga 30° ke kanan menggunakan roda tangan dari depan Tinggi potongan pada kemiringan 45°: 140 mm Lebar potongan: 420 mm; lebar potongan pada posisi miring 45°: 290 mm Bisa diputar hingga 60° ke kiri dan 45° ke kanan Termasuk mata gergaji untuk kayu Roller conveyor pemotongan berat sepanjang 6.000 mm, sisi pemasangan kiri, dorongan pembatas dapat diatur panjangnya dengan roda tangan dari mesin, dapat dikunci secara pneumatis, panjang dapat dibaca secara digital, tampilan digital versi 230Volt Roller conveyor pengumpanan berat sepanjang 4.000 mm, sisi pemasangan kanan Mesin dapat dimiringkan ke kedua sisi dari depan menggunakan roda tangan dan roda gigi ulir Atas permintaan tersedia berbagai opsi, misal ketinggian potongan lebih besar (215 mm dan 240 mm), penjepit material pneumatis, dan indikator laser pemotongan Dengan modifikasi yang sesuai juga cocok untuk pemrosesan aluminium Roller conveyor dapat disediakan dalam panjang lebih pendek atau lebih panjang sesuai permintaan

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Schiavo Hydro 3000.6 Vertical glass washing machine with pre-wash zone, main wash zone, and drying zone. Wet section predominantly made of stainless steel and moisture-resistant materials. 150 mm one-piece washing brushes with stainless steel core. Including water tanks for water treatment. Including fans for glass drying. Discharge section with inspection lamps. Processing dimensions: Hnsdpfx Ajwd N Urea Djp Max. glass height: 3000 mm Glass thickness: 3–22 mm Brushes: 6 pieces Connected load: 22 kW

Kondisi: baru, Tahun pembuatan: 2024, nomor mesin/kendaraan: MR005970, Perfect trimming up to 200 mm height! Double mitre capability with a fixed zero point. When tilting the machine for mitre cuts, the saw blade enters the material at the same point. Technical specifications: - Fixed zero point: Yes - Mitre angle: 45-90-25° - Tiltable: Yes - Tilt angle: 60-90-30° - Maximum cutting length: 420 mm - Maximum cutting height: 200 mm - Maximum saw blade diameter: 520 mm - Weight: 310 kg - Saw blade speed: 2800 rpm - Motor power: 7 HP - Serial number: 2024/95/5 Hnodpfx Ajvzl Scja Dop