Garis sambungan

GRECON

Kondisi: sangat baik (bekas), Tahun pembuatan: 1994,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Set for finger jointing in medium and high-volume production. The machine is technically sound and in good condition. The set includes several sets of tools. Features: – Industrial set with a single tenoner. Operator-supervised bundle loading allows processing of lower-grade raw materials as well, – All functions controlled by microprocessors (automatic control), – Bundle rotation after each operation on a rotary table (butt joint) or flipping the bundle over (furniture joint—unique GOMA solution), – The set includes an automatic press loading station, – Possibility of intermediate cutting on the press, TENONER WITH FEED TABLE Specifications: Milling spindle: Ø 50x210 mm Spindle speed: 6,000 rpm Motor: 18.5 kW Tool dimensions: Ø 250x160 mm Saw spindle trues the end grain Special chipper: Ø 300x8 mm Motor: 6 kW / 3,000 rpm Stepless feed table Working width x height: 600 x 30–160 mm Glue nozzle profile according to tool Iedpfxjlu D Tfe Aaheik FC-10 PZ6/2 PRESS Specifications: Board width: 30–160 mm Board thickness: 20–70 mm Finished board length: 6,000 mm Pressing force: 3 / 7.5 / 10 T Hydraulic power unit: 3 kW / 140 bar

Kondisi: sangat baik (bekas), Four-sided planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor: 4 kW Fully adjustable heads Electrically adjustable planing height and width Spindle diameter: 40 mm Feed via cardan shaft rollers, stepless adjustment Robust planer by WEINIG Machine length: 415 cm The machine has been inspected and is in original condition Iisdorigxyjpfx Aahsk

Tahun pembuatan: 2002, Kondisi: diremaj di bengkel (bekas), Full-automatic finger jointing line: Type Doppel-Pack with automatic infeed with multiple cross-cut saw Isdpeg D Ugkofx Aahjik with stacking unit Specification: Wood input length: min. 150 mm max. 1000 mm average 400 mm Wood cross-section: min. 20 x 40 mm max. 80 x 180 mm Wood output length: 6030 mm Max. wood cross-section with 10 mm finger size: Hardwood 120 cm² Softwood 150 cm² Finger jointing possible vertical and horizontal Type of glue: PVAC white glue, double-sided glue application Power supply: Connection voltage: 400 V Control voltage: 24 V 50 Hz System completely pre-wired up to the control cabinet. Finger length / optional wood cross-section and glue type can still be customized. Performance: 6 milling tables/min Working height: 960 mm Table width: 600 mm Glue application: double-sided Technical parameters: Input material: Input length of parts (min. - max.): 150-1000 mm Part width (min. - max.): 40-155 mm Part thickness (min. - max.): 20-80 mm Working height: 960 mm Bundle width: 600 mm Glue application: double-sided application (both sides of the part)

Kondisi: sangat baik (bekas), Four-sided planer Weinig Unimat 23 EL Working width: 230mm Working height: 160mm Spindle configuration: Bottom: 5.5 kW Right: 4 kW Left: 5.5 kW Right: 4 kW Top: 11 kW Iisdpfx Asrb An Uoahjk Bottom: 5.5 kW Top: 7.5 kW Bottom: 7.5 kW Variable feed speed via variator: 6-36 m/min Feed driven by cardan shaft Table with powered rollers Pneumatic pressure elements CE certificate Year of manufacture: 2003

Kondisi: bekas, Tahun pembuatan: 2004, WEINIG GRECON DOUBLE-END FINGER JOINTING LINE MOD. PJ 150/500 – CE – USED - Infeed wood length: 150 – 700 mm - Wood width: 40 – 150 mm - Wood thickness: 18 – 80 mm Isdewry I Ejpfx Aahoik - Press length: 6100 mm - Pressing force: 120 kN - Milling motor: 15 kW - Scoring saw: 5.5 kW - Year: 2004 CE

Kondisi: baik (bekas), Tahun pembuatan: 1973, Weinig four-side planer / U250 / Unimat 250 Planing width: 250mm Planing height: 120mm Bottom spindle 7.5 kW Right spindle 5.5 kW Left spindle 7.5 kW Right spindle 7.5 kW Top spindle 7.5 kW Bottom spindle 7.5 kW Saw unit spindle 7.5 kW Includes planing heads Includes milling tools Includes knives Ijdpfxorigq So Aahsik Complete accessories included Good condition – immediately available Location: Austria, near Sankt Pölten

Kondisi: bekas, Tahun pembuatan: 1994, USED WEINIG PROFIMAT 23 AUTOMATIC 5-SPINDLE MOULDER Iisdpform Rxwex Aahok Configuration: - 1) bottom horizontal spindle - 2) right vertical spindle - 3) left vertical spindle - 4) top horizontal spindle - 5) bottom horizontal spindle Working width: 230 mm Year: 1994 Voltage: 380/50

Kondisi: bekas, Tahun pembuatan: 2001, Timber dimensions to be processed: Input lengths min/max: 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max: 40 - 300 mm Input thicknesses min/max: 15 - 120 mm Maximum timber cross-section: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw, min./max.: 510 – 2800 mm Special application: Cutting blocks, length min/max: 100 – 200 mm (Note: Multiple block lengths in new sorting; blocks are transported to the end of the sorting line and fall into customer-supplied mesh boxes) Iiodjw Sy T Hopfx Aahek Cut-off/trimming tolerance: +/- 0.8 – 1.5 mm (for timber with minimal resin content and even surface. Tolerance up to 1m fixed length max.; tolerance for longer parts up to 2.5m). Thickness tolerance: +/- 3 mm Curvature of timbers in any direction: max. 10 mm per meter length Timber species: Softwood or hardwood System performance: Feed speed: steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 sec To attain the practical daily capacity, effectiveness factors dependent on the customer’s production conditions must be considered. Infeed height and saw: 900 mm (To be mounted on customer-side platform, saw requires concrete base) Sorting height: 2000 mm Connection data: Total electrical connected load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Maximum voltage fluctuation: 5 % Compressed air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint color: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Non-driven support roller, front end in front of sheet metal table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera for detection of defect markings Pos. 4: Automatic contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version, with built-in waste chute, includes equipment package for large timber cross-sections Graphic input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control Processing capability: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on the outfeed conveyor Location: Nattheim

Kondisi: hampir baru (bekas), Tahun pembuatan: 2004, HYDRAULIC PRESS FOR EDGE GLUING OF WOODEN ELEMENTS HSKG Category: VI – Hydraulic presses for gluing wooden elements Iodpfx Ajtrl R Ajaheik The HSKG device is designed for high-pressure gluing of wooden components cut in thickness, using hydraulic cylinders. The compression force range per cylinder is 5-11 kN (horizontal) and 25-55 kN (vertical). Gluing takes place in a stack within the loading field dimensions. The stack is formed by hydraulic pressing between movable vertical beams and vertical slats of the cross cylinders. Both stack-forming elements are equipped with wooden or metal inserts matching the profile of the slat stack. Edge-gluing of wooden elements improves frame quality, reduces machining costs, and decreases wood waste. Technical and operational data (standard HSKG – 6m version): Number of loading fields: 4 pcs Dimensions of a single loading field: - loading height: 1,140 mm - slat length per field: 1,530 mm Maximum slat width: 150 mm Maximum length of glued elements: 3,120 mm Installed power: 3 kW Power supply: 3/N/PE, 400V 50Hz Control voltage: 24 V DC Number of cylinders per field: - Ø 50x100 – 3 pcs - Ø 80x100 – 3 pcs External dimensions (L x W x H): 8,120 x 1,000 x 2,300 mm Machine weight: 4,800 kg Upon customer request, we also manufacture alternative clamping cylinder control configurations depending on the envisaged length of the glued elements, as well as different lengths and numbers of individual working fields per press set, and a maximum working width of up to 220 mm with increased pressing force.