Machining Center
GROB-WERKE G550 II

Name: GROB-WERKE G550 II
Brand: GROB-WERKE
Availability: InStock

tahun pembuatan

2019

Kondisi

Bekas

Lokasi

Maribor

Tampilkan peta

Data mesin

Nama mesin:: Machining Center

Pabrikan:: GROB-WERKE

Model:: G550 II

Nomor mesin:: G552-2158 U21156

Tahun pembuatan:: 2019

Kondisi:: sangat baik (bekas)

Fungsi:: berfungsi sepenuhnya

Jam operasional:: 10.000 h

Harga & Lokasi

Lokasi:: Cesta k Tamu 16, 2000 Maribor, Slovenia

Hubungi

Rincian teknis

Jarak pergerakan sumbu X:: 800 mm

Jarak lintasan sumbu Y:: 1.020 mm

Jarak gerak sumbu Z:: 970 mm

Gerak cepat sumbu X:: 65 m/menit

Pergeseran cepat sumbu Y:: 50 m/menit

Pergerakan cepat sumbu Z:: 80 m/menit

Torsi:: 206 Nm

Produsen pengendali:: HEIDENHAIN

Model controller:: TNC 640

Diameter benda kerja (maks.):: 900 mm

Berat benda kerja (maks.):: 700 kg

Beban meja:: 800 kg

Diameter meja putar:: 770 mm

Berat keseluruhan:: 25.700 kg

Kecepatan spindel (maks.):: 16.000 rpm

Jam operasional spindle:: 5.200 h

Pasokan pendingin:: 40 batang

Jumlah spindel:: 1

Jumlah slot dalam magazin alat:: 126

Panjang alat:: 750 mm

Perlengkapan:: konveyor serpihan

Rincian penawaran

ID iklan:: A18648396

Pembaruan:: terakhir pada 05.03.2025

Deskripsi

Machine Specifications:

Model: GROB G550 AB Generation 2

Power Supply: 400V, 50Hz, TN-S

Compressed-Air System: Working pressure 5 bar, minimum input pressure 5 bar

Automatic Work Area Door for manual and automated loading/unloading

Work Area Exhaust System: Decentralized, 800 m³, Filter Grade F9

Machine Protection for Water-Based Cutting Fluids

Work Area Lighting

Cooling System: Air-cooled chiller unit (11 kW)

Control System: Heidenhain TNC 640 with English HMI

Swivel Axis Calibration (GSC)

Collision Monitoring (DCM)

Kinematic Measurement Inspection Equipment

Pallet Storage System Interface (Software & Hardware v1.7)

Bljdpfov Hdmpsx Aaror
Key Features:

Tilting Table Unit (A-Axis) & Rotary Table with T-Slots (B-Axis)

Motorized Spindle: HSK-A 63, 16,000 RPM, 159/206 Nm, 25/32 kW, Oil-Air Lubrication

Double Disk-Type Tool Magazine: HSK-A 63, 126 pockets, supports extra-long tools

Laser Measurement System

Tool Lift & Tool Cleaning Device

Chip Management: Scraper-Type Chip Conveyor,

Cutting Fluid Filter System KF220, Cutting Fluid Tank

High-Pressure Cutting Fluid Unit (5-40 bar, ICS), Circulating Chiller (13 kW),

Air Gun & Flush Gun in Work Area,

Compressed Air Feed Through Spindle Center

Touch Probe: Renishaw OMP60

Remote Machine Diagnostics with Access Control Switch

CE Labeling, Slovenian Documentation & Tags

Easy Robot 250 Automation System:

Base Unit: ERE Robot Easy MTS 2.0 400, 6-position 250kg

Accessories: EWIS Rapid Scan, Comserver Kit Internal Erowa Manual Control

Options: Magazine modification, Robodoor & Safety Fences

Interfaces: Plug Kit Harting Modular Connector

Installation & Training Included

Tooling for Automation:

MTS Base Plate 410x410x250 P/A Universal (6x)

MTS Pallets, Seals, and Chucking Spigot Set

MTS Gripperlink Rapid & EWIS Rapid Chip with Chip Holder

This GROB G550 is an advanced, fully-equipped machining center ready for high-precision and high-efficiency operations. The Easy Robot 250 system enhances automation capabilities, making it an ideal solution for modern manufacturing environments.

Dokumen

18648396-01.pdf
18648396-02.pdf

Penyedia

Terdaftar sejak: 2019

5 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+386 1 58... iklan

+386 1 52... iklan

Faks:

Iklan-iklan ini juga mungkin menarik bagi Anda.

iklan kecil

Pusat pemesinan CNC 5-sumbu + pendingin internal alat (IKZ) Posmill H500U

Ebenweiler

11.153 km

Pusat pemesinan CNC 5-sumbu + pendingin internal alat (IKZ)
PosmillH500U

Hubungi

Kondisi: baik (bekas), Tahun pembuatan: 2018, Internal Article No.: 25043 5-Axis CNC Machining Center POSmill H 500 U Year: 2018 Approx. 1,000 spindle hours since spindle replacement Machine approx. 20,500 hours total 2024: Spindle replaced (18,000 rpm) 2024: Geometry recalibrated. Travel paths: X 650 / Y 850 / Z 500 mm Rotary table: 360 degrees, continuous Control: Heidenhain iTNC 530 Spindle: 18,000 rpm Spindle interface: HSK-A63 The machine is equipped as follows: - 60-position tool changer - ICS (20 bar) with belt filter system - Air through spindle - Kessler table, diameter 500 mm - Infrared workpiece measurement - 3D probe - Tool measurement via BLUM laser - Rotating viewing window - POS DCM collision module - Mobile electronic handwheel - Oil mist extraction - Heidenhain linear measuring systems X, Y, Z - Purge air for all linear measuring systems Blsdpewz I Acjfx Aarsr - Active switch cabinet cooler, air-to-air - Active cooling for 4th and 5th axes, controlled - Network connection + USB port - Controlled spindle chiller - Heidenhain rotary measuring system - Profile safeguarding POSkontur - External hinged belt chip conveyor - Coolant pump at head, operated by M-functions - Pump for chip flushing device - Chip flushing device - Operating status indicator - Air at the spindle - Oil/coolant separator, electromechanical - Automatic coolant fill-level monitoring - 3-way media interface at table center - Hydraulic unit incl. control via M-function Connected load: 60 kVA Footprint: W 4800 / D 4600 / H 3000 mm + ICS unit (LxWxH) 2200 x 1300 x 1400 mm Weight: approx. 13,000 kg The machine is in excellent condition and comes from a small, family-run company. In 2024, the spindle was replaced and the geometry recalibrated (guides repaired and adjusted). Since then, the machine has seen very limited use.

Lihat detail

iklan kecil

Mesin Penggilingan Gigi / 5 poros Datron D 5

Jerman

11.214 km

Mesin Penggilingan Gigi / 5 poros
DatronD 5

Hubungi

Tahun pembuatan: 2012, Kondisi: baik (bekas), The machine has a total spindle time of 5,600 hours. Datron D5 Dental Milling Machine, Year of manufacture: 2012, Blsdpfxewvqh De Aaror 5-axis simultaneous machining, Control: PC – Beckhoff, Automation / 8 blanks, Milling spindle: 1.8 kW, Spindle speed up to 50,000 rpm, Tool holder: HSK C25, 15-position tool changer, Rotary – swivel axis, A axis: +/- 25°, B axis: +/- 45°,

Lihat detail

iklan kecil

Heilbronn

11.154 km

Pusat permesinan 5-sumbu
ReidenBFR-1

Hubungi

Kondisi: baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.200 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 700 mm, - Milling head/spindle overhaul in 2022 for 28,000 Euro - Heidenhain iTNC530 CNC control - NC swiveling milling head: B-axis full NC axis A-axis horizontal/vertical - NC rotary table (C-axis) - 72-position tool changer - Chip conveyor - Electronic handwheel - Coolant system (IKZ 20 bar) Technical data / technical details: X-axis travel / longitudinal 1200 mm Y-axis travel / cross 600 mm Z-axis travel / vertical 700 mm C-axis rotary table 360° B-axis +-90° Rotary table diameter 800 mm Spindle taper SK40 Spindle speed range 0–6300 rpm Tool magazine capacity 72 positions Spindle drive power 100/40%ED 17 / 25 kW Machine weight approx. 9000 kg Technical data, accessories, and description of the machine are not binding. Bsdpfx Asrz I Hboarslr

Lihat detail

iklan kecil

Mesin penggilingan tempat tidur - universal DECKEL FP 3 L

Unterschleißheim

10.996 km

Mesin penggilingan tempat tidur - universal
DECKELFP 3 L

Hubungi

iklan kecil

Hilden

11.263 km

Mesin penggiling gigi
HÖFLERRAPID 1000

Hubungi

Kondisi: bekas, Tahun pembuatan: 2001, Head circle diameter: 1000 mm Root circle diameter: 50 mm Module - max.: 18 mm Module - min.: 1 mm Gear diameter - max.: 1000 mm Gear width: 630 mm Profile height max.: 41 mm Helix angle (left/right) max.: 45° Table diameter: 720 mm Maximum table load: 1,500 kg Grinding wheel diameter min./max.: 180 / 400 mm Grinding wheel width: 60 (45/30) mm Grinding spindle speed: 0 - 3,100 rpm Bjdpfx Ajwp S Thjarjlr Total connected load: 30 kVA

Lihat detail

iklan kecil

Pusat permesinan universal HERMLE C 600 U

Mögglingen

11.103 km

Pusat permesinan universal
HERMLEC 600 U

Hubungi

iklan kecil

Pusat permesinan CNC - universal Deckel Maho DMC 80 U

Trittau

10.978 km

Pusat permesinan CNC - universal
Deckel MahoDMC 80 U

Hubungi

Kondisi: baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, We offer you the following: Universal Machining Center Manufacturer: Deckel Maho Model: DMC 80 U Year of manufacture: 2009 Control system: Heidenhain MillPlus Technical data: X-axis travel: 800 mm Y-axis travel: 800 mm Z-axis travel: 1000 mm C-axis: 360° A-axis: -25° / +120° Max. spindle speed: 10,000 rpm Table size: 630 x 630 mm Max. table load: 800 kg Centering bore: ⌀ 50 mm Bledpfx Aevx Tmcearer Tool holder: SK40 Tool changer: 180 positions Feed rate (x/y/z): 0 - 60,000 mm/min Rapid traverse (x/y/z): 60 m/min Operating hours: approx. 75,463 h Spindle hours: approx. 22,122 h Technical features: - Internal coolant supply (IKZ) Accessories: - Chip conveyor - Touch probe Accessories, depicted tools, and clamping devices are included in the scope of delivery only if specified in the additional information. Subject to prior sale. Technical data and details may be subject to change and error.

Lihat detail

iklan kecil

Langeskov

10.931 km

Sistem pengukuran
Erowa

€13.400

harga tetap ditambah PPN

Hubungi

iklan kecil

Pusat permesinan 5-sumbu Victor VCenter-AX380 5-Achs

Bergneustadt

11.214 km

Pusat permesinan 5-sumbu
VictorVCenter-AX380 5-Achs

Hubungi

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 700 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 540 mm, gerak cepat sumbu X: 48 m/menit, pergeseran cepat sumbu Y: 48 m/menit, pergerakan cepat sumbu Z: 48 m/menit, model controller: Heidenhain TNC 640, tinggi total: 29.620 mm, panjang total: 32.000 mm, lebar total: 28.480 mm, beban meja: 200 kg, diameter meja putar: 380 mm, berat keseluruhan: 6.000 kg, kecepatan spindel (maks.): 12.000 rpm, pasokan pendingin: 36 batang, Perlengkapan: dokumentasi / manual, konveyor serpihan, Victor 5-Axis Machining Centre VC-AX380 with Heidenhain TNC640 Control Bledpfsq Tafxex Aaror 5-axis simultaneous machining incl. KinematicsOpt calibration tool and calibration sphere. Standard Options: - Coolant system with high-pressure coolant pump MTH4-40/4 and supply hoses - Full enclosure coolant protection cabin - Spindle oil cooler - Oil separator - Spiral chip conveyor - Rinse gun and air gun - Operating tools and manuals Additional Options: - Through-spindle air - Air conditioning unit in the control cabinet - Chip conveyor - 40 tools - 36 bar ICS (internal coolant supply) with Mahle duplex filter - Table wash - Workpiece measuring system TS460 - Automatic door - Interface - 8" 3-jaw chuck Images are for reference only and may vary. Available ex stock Bergneustadt (subject to prior sale).

Lihat detail

iklan kecil