Pusat permesinan universal
GROB-WERKE G552

Name: GROB-WERKE G552
Brand: GROB-WERKE
Availability: InStock

Tahun pembuatan

2019

Kondisi

Bekas

Lokasi

Zuchwil

Pusat permesinan universal GROB-WERKE G552

Tampilkan peta

Data mesin

Nama mesin:: Pusat permesinan universal

Pabrikan:: GROB-WERKE

Model:: G552

Tahun pembuatan:: 2019

Kondisi:: hampir baru (bekas)

Jam operasional:: 3.000 h

Harga & Lokasi

Lokasi:: Niedermattstrasse 3a, 4528 Zuchwil, Schweiz

Hubungi

Rincian penawaran

ID iklan:: A19474336

Pembaruan:: terakhir pada 01.07.2025

Deskripsi

TECHNICAL DATA

Spindle hours: 3,000 h

Dimensions and Weights

Machine length: 6,452 mm
Machine width: 2,900 mm
Machine height: 3,271 mm
Weight: 25,700 kg

Electrical Specifications

Operating voltage: 400 V
Mains frequency: 50 Hz
Control voltage: 230 V
Maximum connected load: 54 kVA
Rated current: 77 A
Main fuse: 100 A

Travel Paths

X-axis: 800 mm
Y-axis: 1,020 mm
Z-axis: 970 mm
A-axis: -185° – 45°
B-axis: 360°

Rapid Traverse

X-axis: 65 m/min
Y-axis: 50 m/min
Z-axis: 80 m/min
A-axis: 25 rpm
B-axis: 50 rpm
Spindle Maximum speed: 30,000 rpm
Spindle taper: HSK-A63

Tool Magazine

Number of tool stations: 140
Type: HSK-A63

SCOPE OF SUPPLY

Includes (not an exhaustive list):

- Grob G552 CNC machining center
- Heidenhain TNC 640
- Minimax CO2 high-pressure
- Fire suppression system
- Knoll KF 600E/2600
- Coolant system
- Camfil oil mist separator
- Bielomatik central lubrication system
Gedewwl Saepfx Adtjbg
- Liquidtool
- Probe system
- Set of HSK-40 toolholders
- Complete operating documentation

The exact scope of supply as per photo series

Top Offer: GROB G552 Machining Center – As-new Condition & Fully Equipped

For sale is a GROB G552 machining center in impeccable condition – used solely for test purposes and therefore virtually as-new. This machine combines the highest precision, reliability, and quality from GROB, and also comes with an exceptionally comprehensive range of optional equipment rarely seen elsewhere.

Equipment Highlights:

- Minimax CO₂ high-pressure fire suppression system – maximum operational safety
- KNOLL KF 600E/2600 coolant system – ensures consistent machining quality even for demanding applications
- Camfil oil mist separator – for clean air and a safe working environment
- Bielomatik central lubrication system – for optimal maintenance intervals and long service life

A rare opportunity for discerning users!

Further Advantages:

- Machine is installed and fully functional
- Inspection under power possible by appointment
- Perfectly suited for companies wishing to start production immediately – without compromise on quality or features

Conclusion:
If you are looking for the very best that GROB machining centers have to offer – in as-new condition and with high-end accessories – this is your opportunity.

Please contact us for further information or to arrange a viewing appointment.

No liability will be assumed for the accuracy, completeness, or currency of the information provided.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Dokumen

19474336-01.pdf

Penyedia

Terdaftar sejak: 2018

82 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+41 32 58... iklan

Iklan-iklan ini juga mungkin menarik bagi Anda.

Iklan kecil

Mesin kawat EDM GF AgieCharmilles CUT 400

Nürtingen

11.153 km

Mesin kawat EDM
GF AgieCharmillesCUT 400

Hubungi

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, GF AgieCharmilles CUT 400 Year of manufacture: 2011 Control: Charmilles Millenium Travels (X / Y / Z): 800 x 550 x 510 mm Travels (U / V): 800 x 550 mm Max. taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3,000 kg Cutting speed: 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire spool with 25 kg (K250) Gbsdpeuuz Iiofx Adteg Dimensions of the complete unit: 2670 x 2870 x 2645 mm Total weight of the unit: 6,300 kg The machine will be cleaned, overhauled, and all functions will be tested by us after receipt of order. Optional: - Commissioning at your location - On-site training - Chiller unit - Transport - Clamping bar set

Lihat detail

Iklan kecil

București

9.907 km

MESIN Penggiling SPLINE
KappRS 2003

Hubungi

Tahun pembuatan: 1979, Kondisi: siap digunakan (bekas), Max. Schleifdurchmesser: 300 mm, Max. Schleiflänge: 1.950 mm, Max. Werkstücklänge: 2.000 mm Max. Vorschubgeschwindigkeit: 1–30 m/min Kühlmittelzufuhr: 100 l/min Stufenlos regelbarer Drehzahlbereich: 2.000–6.000 U/min Spindeldurchmesser: 88 mm Spitzenhöhe: 150 mm Schleifscheiben: 100–250 mm Spindelleistung: 3,5 kW Gesamtleistung Schleifmaschine: 15 kW – 380 V – 50 Hz Godpfxjhq Uige Adtobg

Lihat detail

Iklan kecil

Bandsaw - Horizontal BERG & SCHMID GBS 305 AutoCut

Jerman

11.023 km

Bandsaw - Horizontal
BERG & SCHMIDGBS 305 AutoCut

Hubungi

Kondisi: baru, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350 x 200 mm Saw band dimensions 3375 x 27 x 0.9 mm Band speed 37 + 74 m/min Table height 940 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.61 t Space requirement approx. 1.5 x 1.75 x 1.9 m Double-mitre metal band saw with AutoCut function Gbedpfsfd Abaox Adtsg - Mitre cuts up to 60° left and 45° right - Ball-bearing rotary table - Side-shiftable vice - Heavy-duty, large material support - Automatic cooling system Image shows semi-automatic version.

Lihat detail

Iklan kecil

Völklingen

11.315 km

Mesin bubut berat
HERKULES2400X10000mm

Hubungi

Kondisi: bekas, Swing diameter over bed: 2400 mm Swing diameter over support: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Face plate diameter: 1650 mm Spindle speed: 1.5 - 150 rpm Max. workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock faceplate: 300 - 1600 mm With special jaws up to 2050 mm Clamping diameter in tailstock faceplate: 300 - 1400 mm Maximum workpiece weight: 70,000 kg Main Drive, Faceplate Faceplate diameter: 2000 mm Faceplate speed, infinitely variable in 4 ranges: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Flange center angle: 70° Supports Travel of grooving slide: 500 mm Travel of cross slide: 1400 mm Rapid traverse, longitudinal: 2000 mm/min Rapid traverse, cross: 800 mm/min Infinitely variable feeds, longitudinal: 0.6 - 300 mm/min Infinitely variable feeds, cross: 0.3 - 120 mm/min Maximum cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Clamping diameter of faceplate: 1400 mm Flange center angle: 70° Gbedpjxddvnofx Adteg Rapid traverse: 1250 mm/min Special Equipment Copying device for first support: Copying length: 8500 mm Max. copying depth in a single pass: 500 mm Boring attachment: Boring bar: 460 x 390 mm Boring diameter: 600 - 1000 mm Maximum boring depth in one pass: 2700 mm For K_s of 200 kp/mm² - s_max = 1.5 mm/rev a = max. chip cross-section 30 mm² at an overhang of 1000 mm With increasing boring depth, reduced chip cross-section A guide rail for taper turning, adjustment angle up to 8° and a maximum taper length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide rail for taper turning, adjustment angle up to 15° and a maximum taper length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle housing.

Lihat detail

Iklan kecil

Thurmaston

11.744 km

Mesin CNC bubut
DOOSANPuma 480D

Hubungi

Kondisi: baik (bekas), Tahun pembuatan: 2014, 900 mm Umlaufdurchmesser, max. Bearbeitungsdurchmesser 650 mm, maximale Drehlänge 992 mm, Spindeldrehzahl 1.000 U/min, Spindelbohrung 275 mm, Gsdpswwtrbjfx Adtsbg 10-fach Revolver, 45 kW Spindelmotor, FANUC Series 32i Steuerung, 3-Backen Kraftspannfutter, Reitstock, Späneförderer, Kühlmitteleinrichtung,

Lihat detail

Iklan kecil

Pusat permesinan - universal DECKEL MAHO DMC 100 U duoBLOCK

Oelde

11.164 km

Pusat permesinan - universal
DECKEL MAHODMC 100 U duoBLOCK

Hubungi

Kondisi: bekas, Tahun pembuatan: 2005, x-travel 1,000 mm y-travel 1,000 mm z-travel 1,000 mm Control system: Siemens 840 D Spindle speed range: 20 - 18,000 rpm Main spindle drive power: 28 / 19 kW Max. torque: 121 Nm Tool holder: HSK-A63 Tiltable B-axis: -30 / +180° Swivel time: 1.2 s Number of pallets: 2 Pallet size: 1,000 x 800 mm Max. workpiece weight: 1,500 kg Rotary C-axis: 360° Number of tool stations: 180 positions Tool holder: HSK-A63 Total power requirement: 78 kVA Godpfowf Rgfex Adtjbg Machine weight: approx. 27.0 t Space requirements: approx. 8.0 x 7.0 x 3.4 m 5-Axis CNC Universal Machining Centre DECKEL MAHO - DMC 100 U duoBLOCK - Swivel milling head (B-axis) - NC rotary table (C-axis) - Pallet changer - 180-position tool magazine - WITHOUT zero-point clamping system - WITHOUT RINGLER extraction unit - WITHOUT tools

Lihat detail

Iklan kecil

Pusat mesin WMW HECKERT HEC 800 Athletic

Mamer

11.364 km

Pusat mesin
WMW HECKERTHEC 800 Athletic

Hubungi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Control system: Siemens 840-D Travel X: 1450 mm (longitudinal) Travel Y: 1100 mm (vertical) Travel Z: 1300 mm Pallet size: 800 x 1000 mm Table load capacity: 2000 kg NC rotary table with direct drive Positioning accuracy: 0.001° Max. rotary table speed: 60 rpm Rapid traverse: 60 m/min Spindle motor: 50 kW (25%) / 28 kW (100%) Spindle torque: 1210 Nm / 680 Nm Gbsdpfevgxfysx Adteg Spindle speed: 6000 rpm Spindle taper: HSK 100 Tool changer: 80 positions Max. tool diameter: 325 mm Max. tool length: 800 mm Max. tool weight: 35 kg Workpiece diameter: 1600 mm Workpiece height: 1400 mm Workpiece weight: 2000 kg Coolant supply through spindle Coolant shower Tool breakage detection in tool changer Spindle motor load monitoring Spindle extension by 100 mm Electronic handwheel Machine is supplied with many tools.

Lihat detail

Iklan kecil

Székesfehérvár

10.494 km

Machining Center
MatsuuraLV-500

Hubungi

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2017, jam operasional: 132 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 20731, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 350 mm, jarak gerak sumbu Z: 300 mm, gerak cepat sumbu X: 90 m/menit, pergeseran cepat sumbu Y: 90 m/menit, pergerakan cepat sumbu Z: 90 m/menit, daya nominal (semu): 35 kVA, produsen pengendali: Fanuc 31I, kecepatan spindel (maks.): 42.000 rpm, jam operasional spindle: 132 h, pasokan pendingin: 20 batang, daya motor spindle: 15 W, hidung spindel: HSK E40, tegangan masuk: 415 V, jenis arus masuk: tiga fasa, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Die Maschine befindet sich in einwandfreiem Zustand. Die Bearbeitungsgenauigkeit beträgt +/- 0,0015 mm (gemessen mit Zeiss Micura). Die Maschine ist mit Renishaw OMP400 und BLUM Pico zur Werkstück- und Werkzeugvermessung ausgestattet. Die Wiederholgenauigkeit liegt bei +/- 0,001 mm. Hochgeschwindigkeits- und Hochgenauigkeitsoption auf Fanuc ist vorhanden. Die Maschine kann unter Strom besichtigt werden. Godpsvcfi Defx Adtsbg

Lihat detail

Iklan kecil

Mesin penggiling silinder cnc STUDER S36 CNC

Contamine-sur-Arve

11.428 km

Mesin penggiling silinder cnc
STUDERS36 CNC

Hubungi

Kondisi: bekas, TECHNICAL DATA - Number of Axes: 3 - Centre Height: 175 mm - Distance Between Centres: 1000 mm LINEAR AXES - Grinding Length: 500 mm - Travel X x Z: 267 x 650 mm GRINDING SPINDLE HEADSTOCK - Continuous Orientation: +/-8.5° - External Grinding Wheel Dimensions: 500 x 80 x 203 mm - Grinding Wheel Holder Spindle Headstock Power: 7.5 kW - Cutting Speed: 44 m/s WORKPIECE SPINDLE HEADSTOCK - Taper Type: MT5 - C-Axis: +/-0.5° - Power: 1 kW - Rotational Speed: 30–1,000 rpm TAILSTOCK - Taper Type: MT3 - Quill Stroke: 35 mm - Quill Diameter: 50 mm - Max. Workpiece Weight Between Centres: 130 kg ELECTRICAL SUPPLY - Supply Voltage: 400V 50 Hz - Machine Dimensions: 2700 x 2350 x H. 2100 mm - Weight: 4,000 kg OPERATING HOURS - Operating Hours: 17,775 h ACCESSORIES - CNC FANUC 16i-TA Control - Pictogramming - Studer RELEASE C Gedeuhbydepfx Adtsbg - Remote Control with Electronic Handwheel - SENSITRON - Hydrobalance HBA 40000-1 Dynamic Balancing Device - MOVOMATIC C25 Automatic Length Probing Arm - MOVOMATIC In-process External Diameter Measuring Arm - Grinding Wheel Guard with Automatic Tilting - Fixed Diamond Dressing Device on Workpiece Spindle Headstock - Coolant Tank: 375 l - Paper Filter - Oil Mist Extraction - Grinding Wheel Flange Holders

Lihat detail

Iklan kecil