Rak barang panjang

GUSTOS D-5-1500-D

Kondisi: baru, racking load capacity 10,000 kg Load capacity per level 2,000 kg Number of storage levels 5 pcs Recommended material length 3,000 mm Upright spacing 1,500 mm Rack height 2,440 mm Dimensions (L x W x H): 2.3 x 0.9 (1.35) x 2.45 m Gisdpfx Aefgyg Nedtjl The optimal solution for storing long materials with 2 uprights. - Each shelf can be swivelled outward, allowing loading and unloading with an overhead crane at any time. - Single-sided design. Galvanized tray made of 2 mm steel sheet, length 3,000 mm: €301 Galvanized tray made of 2 mm steel sheet, length 3,000 mm, with cut-out: €333 Distributor for tray, steel: €54.00 Distributor for arm, steel: €54.00 Distributor for tray, stainless steel: €69.00 Distributor for arm, stainless steel: €69.00

Kondisi: baru, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw blade length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer best-in-class sawing technology and outstanding performance when cutting special steels. - The electrically-welded machine frame and the steel saw frame meet all cutting requirements, eliminating vibrations and noise. - The chip conveyor is hydraulically driven and has adjustable speed. - All machine movements (saw frame, vice, feed, and saw band guides) occur via modern linear guides with high static and dynamic load capacities, ensuring minimal sliding friction. - Another characteristic feature are the rollers for material positioning, powered by a hydraulic motor. These move perpendicular to the material to ensure optimal clamping. Gsdjfg E Hpspfx Adtjil - Thanks to adjustable saw band height control, the operator can position the band close to the material’s top edge. After the cut, the band automatically returns to its previous position, or, optionally, can remain in the lower position. During the cutting cycle, the software compares the cutting load to the preset values, allowing the saw system to halt automatically in case of irregularities. - The saw band is cleaned by two adjustable steel brushes with hydraulic drive. - The hydraulic unit, including filter and pressure gauge, ensures exceptionally smooth operation at constant pressure. - Finely ground carbide inserts securely clamp the saw band and are complete with lateral, hardened, and adjustable guide rollers. The adjustable blade guide travels automatically as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, managed by the machine software. Tension is automatically released after a preset time when the machine is idle or following a completed cycle. - Automatic version with CNC control available in X-TECH 900 / 1200 models, featuring a 500 mm feed stroke, ideal for high-production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, enabling precise material positioning even at maximum load. - All guided movements are driven by four recirculating ball guides with high static and dynamic load capacities, significantly reducing feed friction. The guides are hardened, ground, and prismatic. Price on request.

Kondisi: baru, Payload capacity 15,000 kg Length 10,000 mm Width 2,450 mm Height 625 mm Rear axle: steerable Front axle: steerable Tire size 425 x 260 mm Machine weight approx. 2.9 t Required space approx. 11.7 x 2.5 x 0.625 m Gisdpfjfrzvlox Adtsl Heavy-duty trailer equipped with: - Twin turntable steering - Small turning radius - Tip-proof due to steering angle limiter - Robust construction, low maintenance - Removable drawbar, length 1,320 mm - Impregnated wooden platform - Standard paint finish may vary. Custom RAL colors available upon request. Different payloads and dimensions required? Please contact us.

Tahun pembuatan: 2021, Kondisi: sangat baik (bekas), Complete set incl. hand and dual foot remote control Digital speed display Hydraulic height adjustment Dimensions: Minimum tilted height: 800 mm Maximum tilted height: 1900 mm Minimum horizontal height: 1050 mm Giodem Ew Stspfx Adtsl Maximum horizontal height: 2000 mm Diameter of face plate: 1500 mm Length: 2900 mm, Width: 1400 mm Weight: 3200 kg Speed range: 0.01 to approx. 0.7 rpm.

Kondisi: sangat baik (bekas), lebar total: 4.000 mm, tinggi total: 7.000 mm, jarak antara tiang: 2.000 mm, panjang rak: 900 mm, Perlengkapan: dua sisi, Terdiri dari 3 kolom dua sisi H 7000 mm 9 tingkat dengan lengan 750 mm Kapasitas beban rak: 900 kg Kapasitas beban per tingkat: 2700 kg Godjulufpspfx Adtjil Kapasitas beban per sisi kolom: 8100 kg Jarak antar kolom: 2000 mm

Kondisi: baru, Load capacity: 5.0 t Workpiece diameter: 100 - 2500 mm Total connected load: 2 x 0.37 kW Gisdpfx Adogvwgcetel Drive unit payload max.: 2500 kg Idler unit payload max.: 2500 kg Table rotation speed: 100 - 1000 mm/min Wheel diameter: 250 x 140 mm Machine weight approx. 0.9 t Includes double foot pedal (Start-Stop/Left-Right) Includes remote control (wired)

Kondisi: baru, Tahun pembuatan: 2025, kapasitas angkut: 20.000 kg, 20 ton container rotator, roller stand, complete set Gijdpfx Adeifgu Uotsl 380 V, infinitely adjustable speed from 200 to 1000 mm/min. Suitable for diameters from 500 mm to 4000 mm Roller diameter: 300 mm x 140 mm Support roller temperature resistance: 100°C Dual synchronized drive AC motor, 380V 750 W With hand and foot remote control, complete set

Kondisi: sangat baik (bekas), Focker Strähler Welding Positioner, 8 Tonnes - Load capacity: 8,000 kg - Equipped with hand and foot remote control - Infinitely variable speed and tilt adjustment - Speed range: 0.02 rpm to 1.1 rpm - Table diameter: 1,500 mm - Height (tilted, center): 1,170 mm - Height (horizontal): 1,400 mm - Length: 2,400 mm - Width: 1,500 mm Gsdef Ezdnopfx Adtsil Condition: Visually and technically excellent, runs very quietly

Kondisi: baru, Load capacity 10 t Workpiece diameter 100 – 3200 mm Roll drum diameter 300 x 120 mm Feed rate 100 – 1000 mm/min Total power requirement 2 x 0.55 kW Features - Electronic components from Siemens/Schneider/Delta - Frequency-controlled drive unit speed - Rollers: steel/rubber - High stability due to robust construction - CE certificate - Excellent price-performance ratio - Remote control via cable Giedpfx Adef Ep Dijtel - Double foot pedal - 3-year warranty (see warranty conditions)

Kondisi: baru, Pressing force 500 t Clearance between uprights 600 mm Stroke 600 mm Table area 3500 x 1500 mm Distance from cylinder to table 600 mm Downward speed from 8 mm/sec Upward speed 16 mm/sec Travel on bed 2200 x 900 mm Total power requirement 30 kW Machine weight approx. 28 t 2. STANDARD EQUIPMENT FRAME - Welded steel frame - Frame and plates are precision milled with a CNC milling machine - Chrome-plated cylinder - Working plate with threaded holes Gijdpfxofv Awhj Adtsl HYDRAULICS - Hydraulic pump by Bosch Rexroth - Hydraulic directional valve by Hydrapack or Badestons - Hydraulic manifold block according to EN standards - Hydraulic oil tank 1000 liters - Pressure adjustment via pressure transmitter/regulator ELECTRICS - Control cabinet according to EN standards - All cables are labeled and clearly arranged - All electrical components by Siemens CONTROL PANEL - Stroke control at any position - X, Y, and Z axis movement by remote control - Stroke adjustment via sensor SAFETY - The machine complies with EC safety standards 2006/42/EC Machinery Directive, EN ISO 16092-01 and 16092-03 - Two-hand operation - Emergency stop button - Safety cable with switch all around the press 4. TRANSPORT AND INSTALLATION – Price includes transport, installation and training at the customer’s plant. – Hydraulic oil is not included in the price. – All handling costs (e.g. crane, forklift, etc.) are borne by the buyer. 5. WARRANTY – The machine comes with a 2-year manufacturer’s warranty. – This warranty includes the supply of all spare parts required for repair and servicing the machine. Damaged parts will be returned to the manufacturer after replacement with a new part. – This warranty does not cover parts damaged by improper use.