Gunting guillotine

HÄMMERLE IMEX 4-30 IMEX 4-30

Tahun pembuatan: 2019, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Farmet FL200 screw press untuk biji rapa/bunga matahari/kedelai, dengan geometri akhir, dalam kondisi sangat baik. Motor 22kw, kapasitas 400kg/jam (dengan pre-press 500kg/jam), lamela dan geometri sudah diperiksa dan dalam kondisi baik. Hnjdpfx Aasxa Hy Uezsr Dipadukan dengan extruder Farmet FE500 (dari penawaran kami) mampu mengolah kedelai hingga 400kg/jam.

Kondisi: bekas, Tahun pembuatan: 1992, Sheet width: 2050 mm Sheet thickness: 10.0 mm steel Bending capacity: 8.0 mm steel Top roll diameter: approx. 205 mm Side roll diameter: approx. 195 mm Control: conventional Oil capacity: 80.0 liters Voltage: 380 V Hnjdpfxoxacdve Aazor Total power requirement: 5.5 kW Weight: 3200 kg Dimensions (L x W x H): 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll plate bending machine - 3-roll concept offers a wide range of bending and rolling options - Swivelling control unit at the front * Operation – control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters up to 1.1 times the top roll diameter achievable - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy steel welded construction - Electro-hydraulic drop-end for easy removal of pipes - Manometer / pressure indicator for the rolls - Safety device (safety cable with switch unit) - Operating instructions (PDF)

Kondisi: bekas, Tahun pembuatan: 1980, nomor mesin/kendaraan: A-07/471A, Maximum sheet width: 130 mm Straightening roller diameter: 40 mm Number of straightening rollers: 5 Feeding rollers: 2+2 Hnsdpocxxx Rjfx Aazjr Minimum sheet thickness: 0.4 mm Maximum sheet thickness: 3.5 mm Weight: 0.4 t Space requirement approx.: 0.6 x 0.65 x 1.15 m Strip straightening machine with integrated infinitely variable VARI drive, reversible (forward and reverse operation), mode selector switch for manual and automatic operation, entry roller basket, analog display for roll position indication, roll position adjustment via handwheels, automatic loop control, in very good condition.

Kondisi: baik (bekas), Press force 110 tons Bending length 3,100 mm Year of manufacture 1990, retrofitted Frame width 2,600 mm CNC axes Y1, Y2, X axis Hodpfx Aew Hx Rzoazonr Control unit Esa S630 Including Wila clamping punch

Kondisi: sangat baik (bekas), buderus-455kw-oel-notheizung-niedertemperaturkessel-auch-mit-bio gas-brenner-moeglich Hnsdpfxjx U Exuo Aazor

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total Power Requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed for heating larger usable areas such as workshops and workspaces in artisanal and industrial operations. These hot air systems require no lengthy pre-heating phases and can heat up the joinery or carpentry workshop, as well as other production facilities, in a very short time. Suitable fuels include solid wood and its byproducts, e.g. solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with the EU Directive 98/37CE Italian Presidential Decree N°459 of 24 July 96 and safety standard 89/392 CE Annex. All hot air furnaces in the MARTINA range 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission values required by the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic operation and continuous air operation - Thermal output: 49.9 kW - Thermal output (Kcal): 43,000 - Fuel consumption: 15 kg/h - Air flow rate: 4,900 m³/h - Combustion chamber depth: 650 mm Hsdpfx Aajvz Hq Hszjnr - Loading door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Firebox underpressure: 0.2-0.3 mbar - Flue draught (rated output): 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable area: approx. 220 m² - Required space: Width 720 mm, Depth 1000 mm, Height 1900 mm - Weight: 300 kg - Flue pipe diameter (nozzle): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90 % - Chimney draft: 13 Pa - Exhaust gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 200 mm - For more data, please refer to the attached data sheet The 2 pipe nozzles for hot air discharge are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per air outlet is permitted for air distribution.

Kondisi: bekas, Tahun pembuatan: 1997, Hydraulic press brake manufactured in 1997 in England, at the EDWARDS PEARSON factory. The press brake is in good condition and is sold complete with tooling. It has always been serviced and maintained on schedule. The machine is currently connected and can be tested or inspected on site. Specification: Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Working length: 3,100 mm Pressing force: 100 t Stroke: 172 mm Distance between table and frame: 450 mm Hodpfx Aaerfx Utezjnr Working speed: 100 mm/s Return speed: 110 mm/s Axes: automatic X1, X2, Y1, Y2, Z1, Z2, R Tooling: Included Weight: 7 t Other details: Recently fitted with a new screen and keyboard for more convenient operation. If you have any further questions, we would be happy to answer them.

Kondisi: baik (bekas), Tahun pembuatan: 1988, de-to-hu-it-lt-lv-nb-nl-pl Hnsdov Tpxqjpfx Aazor

Kondisi: bekas, Tahun pembuatan: 1987, Pressure: 160 t Bending length: 4000 mm Frame gap: 3060 mm Control system: FORTRON CNC 10 H 4 Throat depth: 280 mm Stroke: 250 mm Installation height: 500 mm Table length: 4050 mm Table width: 280 mm Descent speed: from 70 mm/sec Return speed: 68.4 mm/sec Working speed: 9 / 3.5 mm/sec Max. operating pressure: 205 bar Oil capacity: 400 l Total power requirement: 19.5 kW Weight of machine: approx. 20.8 t Hjdpetqqr Rofx Aazjnr Total weight incl. accessories: 22 t Machine dimensions (L x W x H): 4.8 x 1.88 x 2.93 m Control cabinet dimensions: 1.6 x 0.5 x 2.25 m - 3-axis machine - with crowning - with graphic display Accessories: programmable backgauge, upper and lower tooling, table extensions

Kondisi: bekas, Technical details: Hodou R A Dljpfx Aazsnr Length: 750 mm Height: 800 mm Welding current: 120 Approximate machine weight: 180 kg Dimensions L x W x H (welding unit): 0.75 x 0.52 x 0.8 m Dimensions L x W x H (compressor): 1.2 x 0.5 x 0.9 m Plasma Cutting Machine Cutting unit: Manufacturer Jäckle, year of manufacture: 2005 - Cutting capacity: 30 kVA - TIG / manual arc welding - Cooling type F - with 6.0 meter torch package - with 12.0 meter grounding cable OPTIONAL for sale: Piston compressor: Manufacturer Schneider, type Universal 650-60D, year of manufacture: 1993 - Output capacity: 500 liters/min. - Volume flow: 616 liters/min. - Compressor pressure: 10 bar - Max. power: 4 kW - Incl. approx. 4 meter compressed air hose - Mobile on two wheels