Oven udara panas

Compactsystem MARTINA 55

Dimensions (LxWxH): 720 x 1000 x 1900 mm
Weight: 300 kg
Total Power Requirement: 1.2 kW
Warm Air Furnace MARTINA 55

The MARTINA warm air furnaces are an ideal solution for energy utilization in wood-processing industrial and craft businesses. These units have been developed for heating larger usable areas such as production halls and workspaces in both craft and industrial operations. MARTINA warm air systems require no lengthy heat-up phases and quickly heat up workshops for joineries, carpentries, and other production facilities.

Suitable fuels include solid wood and its by-products, such as solid wood panels, wood scraps, chips, sawdust, pellets, or briquettes. MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guideline 89/392 CE. All MARTINA series warm air furnaces (models 15–30–55–85–120–180–240–350) meet both emission stages required by the German 1st BImSchV regulation.

- Automatic and continuous air operation
- Thermal output: 49.9 kW
- Thermal output: 43,000 kcal
- Fuel consumption: 15 kg/h
- Air capacity: 4,900 m³/h
- Combustion chamber depth: 650 mm
- Loading door: 370 x 350 mm
- Warm air blower: 1.12 kW / 230 V
- Fire chamber negative pressure: 0.2–0.3 mbar
- Draft requirement at rated output: 0.18 mbar
- Heated room volume: approx. 1000 m³
- Heated area: approx. 220 m²
- Space required: width 720 mm, depth 1000 mm, height 1900 mm
- Weight: 300 kg
- Flue outlet diameter: 160 mm
- Recommended chimney diameter: 200 mm
- Efficiency: 85–90 %
- Chimney draft: 13 Pa
- Flue gas temperature: 290 °C
- Warm air outlet connectors: 2 x Ø 200 mm
- For additional technical data, please refer to the attached data sheet.
Fgodpfx Ajvz Hq Hjdqjh

The two warm air outlet connectors are located on the rear lower section of the furnace. A maximum pipe length of 20 meters per outlet is allowed for distributing warm air.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.