Unit penyaring ekstraksi dengan rotary valve (cell wheel sluice)

Höcker Polytechnik MultiStar VR 6.6

Filtration unit, immediately available! BRAND NEW, in original packaging! 1.1. STfp-rFan DER4 450/550/18.5-2 | incl. backdraft damperExtraction fan, "DER4" series for clean air side installation, single-sided suction, direct drive. Key construction features: Spiral housing made of galvanized sheet steel, pre-configured for horizontal installation in MultiStar series filters, IEC-standard motor, high-performance impeller with backward-curved blades, designed for clean air extraction operation. Suction nozzle with spark guard. Impeller welded from steel, statically and dynamically balanced. For explosion protection reasons, the fan is not suitable for conveying explosive dust/air mixtures! Technical data and performance: Airflow volume (max. permissible): 15,000 m³/h Total pressure increase: 3,000 Pa Inlet nozzle: 450 mm diameter Outlet nozzle: 450 mm x 355 mm Drive motor: 18.50 kW, 3,000 rpm at 50 Hz | 3,600 rpm at 60 Hz Voltage / frequency: 400 V, 50 Hz Motor efficiency class: IE3, Premium Efficiency Weight, approx.: 330 kg Direction of rotation: RD 0 1.1.1. STCold conductor 18.5 kW 1.2. STMultiStar VR 6.6-195.25317AMultiStar modular filter unit with vibration cleaning for installation outside potentially explosive areas. Construction features: Galvanized, self-supporting sheet steel construction. Pressure surge resistance 200 mbar (type-tested, Dekra-Exam 342863200a-23ExA-Sip). Housing vacuum resistance max. 5,500 Pa (pulsed loads must be avoided). EU type-tested rupture discs. Weather protection cladding for the filter section with inspection door(s) and the required number of exhaust air connections (depending on air volume). Fire resistance EW 90ef, MPA-tested. Clean air connection as per project drawing. BG-tested needle felt filter material, suitable for wood and paper dust as well as many other dust types. Filter bags externally loaded, with reusable internal support elements. Filter cleaning takes place during operation breaks. Expansion chamber for pre-separation. The permissible fill height of the expansion chamber depends heavily on the material properties (bulk density, grain size, tendency to bridge formation, etc.) and is approx. 400...700 mm. Inspection door with viewing window and limit switch. Connection shaft for rotary valve, etc. Technical data and dimensions: Filter area: 195 m² Filter bags: 144 pcs Filter bag length: 2,530 mm Bag diameter: 170 mm Vibration motor: 0.18 kW, 400 V, 50 Hz - 1 pc. Agitator drive: 1.50 kW, 400 V, 50 Hz Footprint, L x W: 2,880 mm x 2,880 mm Space requirement, L x W: As per system drawing Height: 9,110 mm. Additionally included: Dry fire line, consisting of: o C-hose connection with blind coupling *) o Riser pipe from filter bottom edge o Distributor pipe system with extinguishing nozzles o Warning sign Note: According to DIN EN 12779:2016, sec. 5.4.2.3 the water connection must be located 0.4 m to 0.8 m above floor level and, in the event of fire, must be safely and easily accessible for connecting a fire hose. BGHM additionally recommends installing a dirt trap in the riser pipe. The necessary components, installation materials and labor hours for this are not included in the base price of the dry fire line. These must either be provided on-site or custom fabricated with special height = 3,000 mm. The sub-frame is not included in the scope of supply and will be specified and supplied separately. 1.2.3. STadditional S
Kdsdpjx U Egrsfx Aa Njg

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.