HAAS DS30Y

HAAS DS30Y

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, jam operasional: 2.408 h, kecepatan spindel (maks.): 4.500 rpm, jarak pergerakan sumbu X: 239 mm, jarak lintasan sumbu Y: 102 mm, jarak gerak sumbu Z: 584 mm, daya motor spindle: 22.400 W, berat keseluruhan: 5.534 kg, jumlah sumbu: 4, Mesin bubut horizontal 4-sumbu tipe HAAS DS30Y ini diproduksi pada tahun 2023. Mesin ini memiliki diameter ayun maksimal benda kerja sebesar 533 mm dan diameter pemotongan maksimal sebesar 349 mm. Mesin dilengkapi dengan turret yang kokoh, menyediakan ruang untuk 12 alat, sehingga menawarkan fleksibilitas tinggi dalam operasional. Jika Anda mencari kapasitas pembubutan berkualitas tinggi, HAAS DS30Y yang kami tawarkan layak dipertimbangkan. Silakan hubungi kami untuk informasi lebih lanjut. • Kapasitas: • Ukuran chuck (chuck utama): 10,0 in / 254 mm • Diameter ayun maksimal benda kerja: 21,0 in / 533 mm • Diameter pemotongan maksimal (dengan turret BMT65): 13,75 in / 349 mm • Panjang pemotongan maksimal (bervariasi tergantung penjepitan benda kerja): 32,5 in / 826 mm • Diameter lubang batang: 3,00 in / 76 mm • Jarak antara center: 32,5 in / 826 mm • Kecepatan rapid traverse: • X: 472 ipm / 12,0 m/menit • Y: 472 ipm / 12,0 m/menit • Z: 945 ipm / 24,0 m/menit • Motor sumbu (gaya dorong maksimum): • X: 4100 lbf / 18238 N • Y: 2300 lbf / 10231 N • Z: 5100 lbf / 22686 N • Spindel utama: • Hidung spindel: A2-6 • Sistem penggerak: Direct drive, belt drive • Torsi maksimum: 275 ft-lbf pada 500 rpm / 373 Nm pada 500 rpm • Lubang through tube: 3,0 in / 76 mm • Diameter lubang spindel: 3,50 in / 88,9 mm • Sumbu C spindel utama: • Kecepatan maksimum: 60 rpm • Daya maksimum: 5,0 hp / 3,7 kW • Akurasi posisi (±): 0,01° • Diameter rem: 13,9 in / 353 mm • Torsi penahan rem: 250 ft-lbf / 339 Nm • Tipe kontrol: Gerakan interpolatif & positioning • Spindel sekunder: • Ukuran chuck: 8,3 in / 210 mm • Hidung spindel: A2-5 • Sistem penggerak: Direct drive, belt drive • Daya maksimum: 15,0 hp / 11,2 kW • Kecepatan maksimum: 4000 rpm • Torsi maksimum: 100 ft-lbf pada 870 rpm / 135,6 Nm pada 870 rpm • Diameter lubang spindle (bukan tembus): 0,81 in / 20,7 mm • Sumbu C spindel sekunder: • Daya maksimum: 5,0 hp / 3,7 kW • Kecepatan maksimum: 60 rpm • Akurasi posisi (±): 0,01° • Diameter rem: 8,5 in / 216 mm Hjdezh Eh Tspfx Aa Dsnp • Torsi penahan rem: 140 ft-lbf / 190 Nm • Tipe kontrol: Gerakan interpolatif & positioning • Posisi spindel sekunder (M119): • Akurasi posisi (±): 0,02° • Diameter rem: 8,5 in / 216 mm • Tipe kontrol: Positioning only • Turret: • Jumlah alat: 12 posisi • Alat eksternal & internal: Kombinasi bebas (bervariasi menurut turret) • Ruang bebas boring bar belakang (dari belakang turret): 4,00 in / 102,0 mm • Alat penggerak: • Kecepatan maksimum: 4000 rpm • Rasio transmisi: 1:1 • Interface alat: BMT65 • Umum: • Kapasitas coolant: 55 gal / 208 L • Kebutuhan udara: • Konsumsi udara: 4 scfm @ 100 psi / 113 L/min @ 6,9 bar • Selang udara inline: 3/8 in • Kopling (udara tekan): 3/8 in • Tekanan udara minimum: 80 psi / 5,5 bar • Data listrik: • Kecepatan spindel: 4500 rpm • Sistem penggerak: Direct drive, belt drive • Daya spindle: 30,0 hp / 22,4 kW • Tegangan masuk (3 phase) – rendah: 220 VAC; arus beban penuh: 70 A • Tegangan masuk (3 phase) – tinggi: 440 VAC; arus beban penuh: 35 A • Dimensi – pengiriman: • Palet domestik: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm • Palet ekspor: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm Spesifikasi Teknis Spindel Balik Ya Alat Gerak Ya

Kondisi: bekas, Tahun pembuatan: 1998, Bore diameter 90 mm Stroke 490 mm Throat depth 400 mm Total power requirement 10 kW Machine weight approx. 3,500 kg Hsdpet Hw T Sjfx Aa Donp Space requirement approx. m KADIA Vertical honing machine Type VZH 90 / 450 F Year of manufacture 1998 Serial No. 50 / 1790 _____ Max. honing diameter 10 – 90 mm Max. honing depth 30 – 450 mm Max. spindle stroke 490 mm Spindle throat depth 400 mm Installation height under spindle nose approx. 1,200 mm Table size approx. 400 x 600 mm Max. workpiece diameter approx. 700 mm Spindle speeds steplessly variable 160 – 830 rpm Stroke speed steplessly variable 25 mm/min Spindle drive 4.5 kW Total drive power 10 kW - 400 V - 50 Hz Weight approx. 3,500 kg Overall height of the machine approx. 4,000/3,300 mm Accessories / Special equipment • Machine equipped with a Siemens S5 / Unipos 4.0 PLC control for entry of all key honing parameters such as tool speed, stroke length, expansion, honing time, error messages, etc. • With fixed table 600 x 400 mm • Automatic shut-off after a specified and pre-selectable time with subsequent spindle retraction • Automatic motorized expansion of the honing tool via electro-mechanical feed head ESZ 90/1 D • Separate hydraulics, central lubrication, workpiece clamping device on table • Currently no suitable coolant system, no honing tools included. Condition: good to very good – demonstration ready Delivery: ex stock – as inspected here Payment: strictly net – upon receipt of invoice

Kondisi: bekas, Tahun pembuatan: 2015, produsen pengendali: Fanuc, model controller: 31i-B, Description: General: Year of manufacture: 2015 CNC control: Fanuc i 31-B Turning diameter: 175 mm Max. turning length: 678 mm Main spindle: Technology: Motor spindle Speed: 4,500 rpm Power: 11 kW Bar capacity: 65 mm C-axis: 0.001° Hedpfx Aey Hnt Eea Dsnp Chuck cylinder: Hollow chuck cylinder Chuck: Collet chuck Sub spindle: Technology: Motor spindle Speed: 5,000 rpm Power: 7.5 kW Bar capacity: 51 mm C-axis: 0.001° Chuck cylinder: Semi-hollow chuck cylinder Chuck: Collet chuck Tool turret I (X/Y/Z/B): Technology: Tool turret Number of stations: 12/24 Tool holder: BMT Driven tools: 6,000 rpm X-axis: 330 mm Y-axis: 80 mm (+/- 40 mm) Z-axis: 1,040 mm B-axis: 182° (+/- 91°) Tool turret II (X/Y/Z): Technology: Tool turret Number of stations: 12/24 Tool holder: BMT Driven tools: 6,000 rpm X-axis: 127 mm Y-axis: 65 mm (+/- 32.5 mm) Z-axis: 678 mm Equipment / Accessories: Chip disposal: Chip conveyor Coolant supply: 2x high-pressure coolant pumps Bar loader: IEMCA Master 80 HF – 4 meters Finished part removal: Parts gripper + conveyor belt Setup operation: Electronic handwheel

Kondisi: bekas, Tahun pembuatan: 1995, Cutting diameter 260 mm Hnedpfewhqxmox Aa Djp Saw band length 3830 x 27 x 0.9 mm Cutting range flat 310 x 260 mm Cutting range square 260 x 260 mm Infinitely variable cutting speed 19-110 m/min Feed length 750 mm Multiple feed length 6750 mm Material support height 700 mm Machine weight approx. 1.4 t Dimensions approx. 2100x2300x1720/1300 mm Includes various saw bands Includes chip conveyor

Kondisi: bekas, Tahun pembuatan: 1961, de2c1c73 Hnjdewwl I Ispfx Aa Dep

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, en-1 Hnodpfxevz Snke Aa Dop

Tahun pembuatan: 2016, Kondisi: hampir baru (bekas), Offered is a vertical turning and grinding center, VLC 100 GT, retrofitted in 2022. With the pick-up spindle unit, workpieces can be automatically loaded into the working area directly from the side conveyor belt. The modular design of the VLC 100 allows it to be configured for a wide range of applications. The photos show a typical combination of turning tools (block tool holders) and grinding spindles for soft or hard machining (internal and external grinding). Depending on the workpiece or technology, these machining modules can be easily adapted. CONTROL SYSTEM Siemens 840Dsl TECHNICAL DATA Max. workpiece diameter: 100 mm Max. workpiece height: 150 mm X-axis travel: 605 mm Z-axis travel: 530 mm PERFORMANCE DATA Main spindle: 18 kW Grinding spindle: 12 kW Hnedpfx Aeh Tm Dusa Dep TOOL HOLDERS 2x block tool holder VDI / Capto Grinder console with grinding spindle: 12 kW, 60,000 rpm Price, delivery time, and machine configuration will be provided upon request.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 450 mm, berat benda kerja (maks.): 1.600 kg, tinggi total: 2.780 mm, lebar total: 2.265 mm, panjang total: 2.110 mm, gores kuas bulu: 450 mm, panjang benda kerja (maks.): 1.220 mm, lebar benda kerja (maks.): 870 mm, tinggi benda kerja (maks.): 470 mm, The GF AgieCharmilles FORM 300, built in 2015, is a powerful and precise used die-sinking EDM machine, engineered specifically for demanding applications in tool and mold making. Thanks to its advanced control technology, excellent surface finish, and high efficiency, it offers an outstanding investment opportunity for businesses that prioritize precision and cost-effectiveness. Main Features & Benefits: ✅ Large working area & high load capacity: Travel paths (X/Y/Z): 600 x 400 x 450 mm Maximum workpiece size: 1220 x 870 x 470 mm Maximum workpiece weight: 1,600 kg Maximum electrode weight: 50 kg ✅ High-precision machining with state-of-the-art technology: Positioning accuracy via linear glass scales (no recalibration required) Innovative ISPG generator (Intelligent Speed Power Generator) for maximum efficiency Adaptive control (ACC & ACO) for optimized spark erosion and reduced electrode wear Surface quality up to Ra 0.08 µm ✅ Powerful control system & automation: Hedpfjw Ebtvsx Aa Donp AC FORM HMI with intuitive touchscreen operation Automatic CAD/CAM integration for seamless data transfer Job management with prioritization and real-time monitoring Remote monitoring via SMS notification ✅ Maximum productivity & flexibility: Automatic 48-position electrode changer for unattended operation Intelligent workpiece measurement & 3D correction Reduced electrode wear thanks to iQ technology ✅ Reliability & low operating costs: Robust C-frame design for high stability Efficient dielectric management with 6 filter cartridges Energy-efficient operation with minimal maintenance requirements Ideal for: ✔ High-precision tool and mold machining ✔ Series production with the highest quality standards ✔ Complex geometries and fine surface structures Experience maximum productivity with the GF AgieCharmilles FORM 300 – your solution for precise and efficient die-sinking EDM! 📌 Our used 2015 machine is cleaned, overhauled, and thoroughly tested prior to sale to ensure the highest level of quality and reliability.

Kondisi: baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 018.0179.90.035, Please let us know your offer price. Sales only within Europe, including Turkey. Price without packaging; Delivery condition: FCA (machine location) ===== For technical data, please refer to the attached handout. Hjdsyh R Uwspfx Aa Denp All warranty and guarantee rights are excluded. We do not guarantee the accuracy of the technical data and year of manufacture, completeness of accessories and tooling, or compliance with all safety and environmental protection requirements stipulated by accident prevention regulations. No sale to private individuals.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 6.417 h, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 400 mm, berat keseluruhan: 4.400 kg, jumlah sumbu: 4, This 4-axis AgieCharmilles FORM 30 was manufactured in 2017. It offers a travel of 600mm x 400mm x 400mm, with axis speeds up to 6 m/min. The machine is capable of machining workpieces weighing up to 1000 kg, with maximum dimensions of 1000 x 700 x 400 mm. It is equipped with a dielectric unit with a capacity of 750 liters and has a total weight of 4400 kg. Take advantage of this opportunity to purchase the AgieCharmilles FORM 30 die-sinking EDM machine. Contact us for more information about this machine. • Axis speed (X/Y/Z): 4 / 4 / 6 m/min • Position reading accuracy (X/Y/Z): 0.1 µm • C-axis rotation speed (standard): 0-100 rpm • Work tank dimensions: 1200 x 800 x 500 mm • Work table size: 800 x 600 mm • Maximum electrode weight: 100 kg • Maximum workpiece weight: 1000 kg • Workpiece dimensions: 1000 x 700 x 400 mm • Dielectric unit capacity: 750 l • Generator type: ISPG Hnedpfx Aaex Nr N Ne Dsp • User interface: AC FORM HMI • Power supply: 3 x 380 V, 3-phase, 50 Hz