Mesin cetak injeksi

Haitian Mars II 7000/2950

Kondisi: bekas, Tahun pembuatan: 2017, Used Goedhart LLK.p 14x6-3006-50x50 evaporator suitable for Freon/Glycol. Complete with 3 Ziehl-Abegg FN050-ZID.DC.A7P2 fans – 50/60 Hz – 1.0 kW – 1550 RPM – diameter 500 mm, with a total air flow of 25,000 m³/h. Bsdpfsrlk Dcox Afpjwt

Kondisi: bekas, Tahun pembuatan: 1992, Automatic PET Bottle Stretch Blow Moulding Machine Manufacturer: SIDEL Model: SBO 4 S1 Bodpfx Aewa Rhrsfpowt Year of manufacture: 1992 Output capacity: 4,000 for 1.5 L / 2 L bottles Installed power: 150 kW Included: 1.5 L moulds Preform feeder Technical condition: used machine, operational, program functioning properly

Kondisi: bekas, Tahun pembuatan: 1998, Automatic PET Bottle Blow Molding Machine Manufacturer: SIDEL Model: SBO 16/16 S1 Year of manufacture: 1998 Output capacity: 16,000 bph for 1.5 L bottles and up to 19,000 bph for 0.5 L bottles Installed power: 347 kW Bsdpfjutni Rsx Afpewt Set includes 1.5 L bottle molds Preform feeder Chiller unit Technical condition: used machine, fully operational until disassembly. The machine is currently dismantled, packed in components, and ready for transport. Comes with complete and original technical documentation.

Kondisi: bekas, Etek stretch blow moulding machine Bjdpekucxlofx Afpowt ISBM Line = Injection Stretch Blow Moulding Stretch blow moulding machine for single-use PET bottles made from PET preform blanks Stretch blow moulding machine for rotary table production process Manufacturer: ETEK / GF-Industries Type Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Power rating: 90 kW Mains connection: 400 Volt, 50 Hz Net weight approx. 6,000 kg As-new condition

Kondisi: baik (bekas), Tahun pembuatan: 2013, gaya penjepit: 16.000 kN, Perlengkapan: dokumentasi / manual, machine_spec_001 Bwedpjyh I Emjfx Afpot

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, jam operasional: 8.000 h, gaya penjepit: 500 kN, diameter sekrup: 25 mm, berat injeksi: 46 g, tinggi total: 1.779 mm, berat keseluruhan: 4.200 kg, This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It is equipped with a fully electric direct drive system and the NC5+ control unit for enhanced energy efficiency and precise injection dynamics. The package includes a granulate dryer, industrial robot, conveyor belt, and temperature control units, making it ideal for high-quality injection molding processes. Please contact us for further information about this machine. Additional Equipment • Granulate dryer • Handling system • Conveyor belt – 1400 mm x 400 mm • Precision scale Bedpfex D Eccsx Afpowt • Temperature units – 2x HB-Therm Machine Advantages Technical Machine Advantages • Exceptional energy efficiency • Increased platen rigidity and mold safety • Fully electric direct drive • Ultra-precise direct drive motors with a 0.1 ms response time • Displacement: 52 cm³ • Injection pressure: 2180 bar • Clamping plates: 520 x 570 mm Additional Information Control Unit Modern control system with NC5+ Automatic mold height and clamping force adjustment Energy-saving routines Dimensions Machine depth: 4308 mm

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036721, gaya penjepit: 6.500 kN, diameter sekrup: 70 mm, jarak antara tiang: 1.110 mm, volume langkah: 1.078 cm³, tekanan injeksi: 1.877 batang, berat injeksi: 981 g, langkah pembukaan: 3.200 mm, tinggi pelat: 1.540 mm, jenis penggerak: Hydraulisch, bentang bebas: 3.200 mm, berat alat: 2.200.000 g, Injection molding machines directly from the manufacturer! As KraussMaffei, the manufacturer, we are pleased to offer you our inspected and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW series sets new benchmarks in quality and productivity. The sophisticated GuideX slide shoe ensures optimal absorption of force, increasing tooling lifetime. The innovative GearX locking system engages immediately and reliably. Powerful, user-friendly, and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24” TFT color screen, multitouch functionality CLAMPING UNIT - Clamping force kN 6500 - Maximum mold opening force kN 455 - Daylight (H x V) mm 1110 x 960 - Mounting platen (H x V) mm 1540 x 1440 - Mold height (min. - max.) mm 1550 (without center platen) - Maximum opening stroke mm 3200 - Maximum mold open distance mm 1650 - Maximum mold weight kg 22000 INJECTION UNIT 1 SP2000 - Screw diameter / type mm 60 / Thermoplastic - Effective L/D ratio 23.3 - Injection pressure bar 2420 - Shot volume cm³ 792 - Shot weight (max. stroke, PS) g 720 - Injection speed mm/s 140 - Injection flow rate cm³/s 396 - Screw drive speed 1/min 285 - Plasticizing throughput g/s 72.2 Bwjdpfxew U N Ixo Afpjt - Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 - Screw diameter / type mm 70 / Thermoplastic - Effective L/D ratio 20 - Injection pressure bar 1877 - Shot volume cm³ 1078 - Shot weight (max. stroke, PS) g 981 - Injection speed mm/s 140 - Injection flow rate cm³/s 539 - Screw drive speed 1/min 285 - Plasticizing throughput g/s 98.3 - Nozzle contact force kN 82 ELECTRICAL PARAMETERS - Connected load kW 341 - Power supply V / Hz 400 / 50 3-phase with neutral conductor WEIGHT AND DIMENSIONS - Net weight t 43.5 - Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull 2-fold (BWAP), 2-fold (FWAP) - Mold heating 96-fold (3.5 kW each) - Euromap interface for handling E18 - Euromap interface (central computer) E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphics analysis package - Sliding table with servo-driven turning unit - Vertical center platen - Parallel clamping and opening movements during injection, with platen parallelism control between FWAP and center platen or BWAP and center platen - ColorForm interface: signal interface for connection of an RPM system - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for “1-K Dummy Operation” - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered upon request. We look forward to your inquiry.

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), A packaging cut and crease machine for corrugated board by Solarco is available. Sheet width: 1700mm, max. sheet dimensions X/Y: 1700mm/4000mm, min. sheet dimensions X/Y: 300mm/600mm, single production capacity: 200–600 pieces/hour, max. multiple production capacity: 2000 pieces/hour, board thickness range: 2mm–8mm. Machine dimensions X/Y/Z: approx. 5500mm/4000mm/1900mm, weight: approx. 4500kg. Documentation is available. An on-site inspection is possible. Bwsdpfx Afjwgc Ahjpet

Kondisi: bekas, Tahun pembuatan: 2002, Technical Details: X-axis travel: 1,060 mm Y-axis travel: 610 mm Z-axis travel: 610 mm Control system: Ultimax 4 Spindle speed: 10 – 10,000 rpm Tool holder: SK40 Tool magazine: drum magazine with 24 stations Feed rate XYZ: 3 – 7,000 mm/min Rapid traverse (XY): 30 m/min Rapid traverse (Z): 20 m/min Table size: 1,220 x 510 mm Table load capacity: 1.1 t Compressed air connection: for 6 bar Total power requirement: 30 kVA Machine weight approx.: 6.28 t (without attachments) Machine dimensions approx. (LxWxH): 2.82 x 3.2 x 2.7 m Bwedpfxou Iddnj Afpst Chip conveyor dimensions (LxWxH): 3.0 x 0.65 x 1.5 m Enclosed working area with chip and splash guard enclosure Including coolant system with internal coolant supply 30 bar (dimensions 1,200x500x150 mm), capacity for 340 liters Spindle with internal coolant supply Scraper-type chip conveyor Control panel with two monitors Electronic handwheel Attention! The tool change gripper arm is missing from the machine! The control system is accordingly set to disabled/off. i.D.

Kondisi: baru, Tahun pembuatan: 2025, Delivery ex works Turkey Bending length (A): 3050 mm Press force: 170 tonnes Sheet thickness 42 kgf / mm: 8 mm Sheet thickness 72 kgf / mm: 4 mm Upper tool: 1260 Top Tool 85° Lower tool: 50, 35, 22, 16 Frame gap (B): 2550 mm Approach speed: 130 mm/s Working speed: 8 mm/s Return speed: 120 mm/s Crowning: Manual (optionally CNC motorised at extra cost) X-axis stroke: 750 mm X-axis speed: 250 mm/s Backgauge fingers: 2 pcs Front support arms: 2 pcs Oil tank capacity: 180 litres Main motor power: 11 kW Stroke length (C): 265 mm Installation height (D): 450 mm Frame depth (E): 410 mm Table height (F): 870 mm Table width (G): 170 mm Length (L): 4200 mm Height (H): 2800 mm Width (W): 2200 mm Weight: approx. 7500 kg Cybelec Cybtouch 12 2D Graphic CNC control 3 axes (Y1, Y2, X), expandable with optional R+Z axes Eurostamp 2067 lower tool (V:50, 35, 22, 16) Eurostamp 1260 upper tool 85° Narrow table All-steel welded construction Promecam quick clamping system CNC-controlled motorised backgauge (X:750 mm) Adjustable backgauge fingers Selectable inch and metric system Ground and chromed cylinders Swivelling control panel Foot pedal with anti-panic stop & emergency stop Side safety fences (secured with limit switches) Light curtain at rear of machine (900 mm) DSP laser finger protection system at front (CE) BOSCH/REXROTH or HOERBIGER/HAWE hydraulic system, BOSCH/REXROTH or ECKERLE hydraulic pump Moveable front support arms (2 pcs) Bodpfjgu N Aljx Afpowt Electrical unit from: SIEMENS, SCHNEIDER, DELTA, ABB, OMRON 380 V 50 Hz Finish: RAL 7035, RAL 5015 Optional special equipment (available at extra cost): - CNC-controlled R-axis (250 mm) - CNC-motorised crowning - Servo drive motors for backgauge system for X+R axes (Mitsubishi) - Custom colour finish on request Documentation in German or English CE conformity