Mesin gerinda koordinat

HAUSER S 40-0106

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, primar-mx-4-wl-specs Ksdpfx Agewyxycolewt

Kondisi: bekas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling range: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (overhung): 130 including clamping unit kg Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space required approx.: 4.2 x 2.0 m Immediately available, naturally with a 12-month warranty! Geometrically overhauled and repainted with new electrics. Kwsdpfsv I Eq Sjx Agljt In KELLENBERGER quality!!! - Digital display on 2 axes. Resolution on the X-axis: 0.5µm - Modern workpiece headstock with MK5 taper - Modern tailstock with MK3 taper - Modern hydraulic unit - Paper band filter Additional accessories available on request The machine tool does not currently meet the basic safety and protection requirements as specified in BetrSichV 2015. An increase to the required minimum safety objective must be determined via a risk assessment according to BetrSichV.

Kondisi: bekas, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore 127 mm Workpiece spindle taper MT5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivelling 360° Grinding headstock swivelling 180° ± Grinding spindle speeds 1500, 1700, 2200 rpm Plunge feed: incremental 0–9.99 mm/Ø Plunge feed: continuous 0–9.99 mm/Ø Table swivelling ±8° Kwodjuxfupjpfx Agljt Longitudinal table travel 1100 mm Table speed 0.02–6 m/min Workpiece weight between centres 130 kg Cross travel max. 270 mm Workpiece weight max. (flying) 130 kg incl. clamping Internal spindle mounting 80 mm Tailstock quill mounting MT3 Quill travel 30 mm Total power requirement 6.5 kW Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Photo shows a previously delivered machine. -The touch panel operation is extremely user-friendly. -The icons on the control panel are virtually identical to the original control, so no retraining is required. -Diagnostic function with display of PLC messages and digital I/Os. -Dressing function can be extended or modified to customer requirements. -Workpiece spindle oriented stop available on request. -New maximum infeed amount: 40 mm, extendable upon request. -Digital display on 2 axes. X-axis resolution 0.5 µm. Options: -Encoder with digital display on the workpiece headstock -Encoder with digital display on the grinding headstock (no height adjustment with spindle possible) -New stable internal grinding attachment diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for grinding spindle Includes: -Operating tools -Clamping tube for chuck Further accessories available upon request. The machine is equipped with an electronically controlled feed system in the X-axis with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile applications in production for external and internal cylindrical grinding, or for external, face and internal grinding in a single setup of individual parts. Available options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measuring control At the present time, the machine tool does not comply with the essential safety and protection requirements as specified in the BetrSichV 2015. The required minimum safety objectives must be determined by a risk assessment in accordance with the BetrSichV.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Grinding length: 973 mm Centre height: 250 mm Workpiece table max. swivel range: +6° / -9° Centre taper: MT5 Grinding spindle head max. travel: 100 mm Kodpfjwhp Dnox Aglowt Grinding spindle head max. swivelling range: +45° / -30° Max. grinding wheel diameter: 500 mm Speed range: 32 - 600 rpm Max. workpiece weight between centres: 400 kg Internal grinding device max. grindable bore: 160 mm Machine weight: approx. 5,000 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 350 mm, jarak gerak sumbu Z: 120 mm, jarak perjalanan sumbu W: 450 mm, For sale: Hauser S35-400 Coordinate Grinding Machine The machine is in excellent condition and was partially overhauled in 2024 for €15,000. It comes equipped with 6 high-quality grinding motors, a face motor, and turbines. TECHNICAL SPECIFICATIONS Distance between upright and spindle: 365 mm Clearance between table and spindle: 485 mm Main spindle diameter: 100 mm X-axis travel: 500 mm Y-axis travel: 350 mm Z-axis travel: 120 mm W-axis travel: 450 mm U-axis travel: 5.5 mm Taper grinding: max. 16° Table size: 600 x 380 mm T-slots: 6 pcs, 10 mm width, 50 mm pitch Table load: 300 kg Speed & Tool Interface Speed 22S: 4,500 - 22,500 rpm 45S/45ST: E19 Speed 45S/45ST: 9,000 - 45,000 rpm 80S: F6 Speed 80S: 40,000 - 80,000 rpm T10/T16: Ø 3 mm Speed T10/T16: 100,000 / 160,000 rpm Slot grinding attachment: 2,900 - 34,500 rpm Planetary movement: 5 - 250 rpm C-axis: 0 - 5 rpm Feed rate X/Y: 0 - 1,200 mm/min Feed rate W-axis: 900 mm/min Feed rate Z-axis: 0.5 - 12,000 mm/min MACHINE DETAILS Digital measurement accuracy: 0.001 mm Base deviation: 0.003 mm Power: 7.5 kW Compressed air requirement: 20 m³ Operating pressure: 5 bar Space requirement: 3.5 x 4.4 m Machine height: 3.5 m Connection rating: 8.3 kVA Weight: 3.1 t EQUIPMENT - Slot grinding attachment - Rotary table, 300 mm diameter - Tilting table, 200 mm diameter - Coolant system - Extraction unit - Very high-quality accessories included On request, transport and loading can be organized Europe-wide at additional cost. All prices plus VAT. Viewing by appointment possible. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell your machine? Kedpfxjwtqthe Agljwt For further information or contact options, please visit our website.

Kondisi: sangat baik (bekas), FANUC 21i-T Steuerung Spitzenhöhe 175 mm Spitzenweite 1000 mm Schleifkopf B-Achse 1° Kodoyabt Dopfx Agljwt Schleifscheibe 500 x 63 x 203 mm Schleifscheiben-Drehzahlen -1'500 U/min Innenschleifeinrichtung 60'000 U/Min Werkstückspindelstock C-Achse 0.001 ° Messtaster Automatische Auswuchtvorrichtung Abrichtgeräte Div. Zubehör MARCELS MASCHINEN AG

Kondisi: bekas, TECHNICAL DATA - Spindle speed: 5 - 300 [rpm] - Minimum resolution C-axis: 0.001 [deg] - Vertical stroke of main spindle: 130 [mm] Kwodpfex Av Adex Aglot - Vertical stroke of main spindle (manual): 140 [mm] - Grinding spindle speed with motor: 4,500 - 80,000 [rpm] - Grinding spindle speed with turbine: 100,000 - 160,000 [rpm] - Cylindrical grinding without/with intermediate plate max.: 230 / 360 [mm] - Max. grinding length Z (with bar): 125 [mm] - Maximum acute angle for taper grinding: 16 [deg] - Max. grinding depth for taper grinding with angle: 44 [mm] LINEAR AXES - Travel X/Y/Z axes: 700 / 500 / 500 [mm] - Rapid traverse speed (X/Y): 4,000 [mm/min] - Feed speed (X/Y): 0 - 2,000 [mm/min] TABLE - Table size: 770 x 630 [mm] - Max. table load: 500 [kg] - Distance from table to spindle nose: 0 - 600 [mm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] WEIGHT & DIMENSIONS - Space requirement: 2,650 x 2,577 [mm] - Machine height: 2,677 [mm] - Machine weight: 5,600 [kg] MACHINE HOURS - Operating hours: 44,995 [h] ACCESSORIES - Control: Fanuc - Coolant tank * with high-pressure pump * with paper filter - Oil mist extractor - Fire extinguishing system* * NB: Functionality not guaranteed. Inspection by a qualified company on the buyer's side is required.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Mesin gerinda silindris Kellenberger dalam kondisi sangat baik. Dijual dengan harga terjangkau. Harga sangat dikurangi !!!!! Kwsdpfsw Dy Rqex Aglot

Kondisi: baik (bekas), Tahun pembuatan: 1987, Kami menawarkan kepada Anda: Mesin Gerinda Koordinat Pabrikan: HAUSER Tipe: S3-DR Tahun pembuatan: 1987 Data teknis: Jalur pergerakan: Kwjdoxw Sx Rspfx Aglst - Sumbu-x: 400 mm - Sumbu-y: 250 mm - Sumbu-z: 300 mm Aksesori, perkakas dan alat penjepit yang terlihat pada gambar hanya termasuk dalam pengiriman jika disebutkan dalam informasi tambahan. Perubahan dan kesalahan pada data teknis serta kemungkinan penjualan di tempat lain tetap menjadi hak kami!

Kondisi: bekas, Tahun pembuatan: 1999, S35-400-2024 Ksdpfxjw Eyk Hs Aglewt