Baterai penggerak

Hawker 36V 3PZB 800

Kondisi: bekas, Tahun pembuatan: 2007, Working width 1380 mm Workpiece height 70 mm Total power requirement 45 kW Machine weight approx. 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding unit Type EM 5 N/II/L + 2 B/1400 Year of manufacture 2007 Serial no. 780063 _____ Grinding width approx. 1,380 mm Roller width 1,400 mm Max. workpiece height 1 - 70 mm Continuously adjustable feed speed approx. 1.5 - 8 m/min Comprising 5 working units: Oscillating sanding roller for use with abrasive cloth (abrasive fleece) Ø 450 mm, 1,400 mm wide x 1,540 long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts Ø 350 mm, drive 2 x 5.5 kW, abrasive flap wheels or non-woven abrasive, adjustable for wear. Brush roller unit to accommodate 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via hand wheel, also ideal for removing oxide layers. Wet grinding unit with belt filter and closed water circuit, installed under the transport belt and easily extendable from the machine. Washing and drying device, designed for a minimum workpiece length of 80 mm, water and air supply adjustable, etc. Workpiece transport is front-sided via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system over a width of 300 mm on the right as well as a magnetic belt with a width of 300 mm, for holding small parts down to a minimum length of 80 mm. Frequency inverter for stepless speed adjustment of the abrasive flap brushes from 250 – 1,000 rpm (position 2 top), as well as for the conveyor feed. Control panel with clear controls and digital readout of roller adjustment, 4 ammeters for monitoring roller drives, control LEDs. Quick-change facility for lateral removal of abrasive flap brushes, as well as various spare rollers with abrasive fleece and brush fittings. Cpjdpfx Aot Hw Iioa Tew Total drive approx. 45 kW – 400 V – 50 Hz Weight approx. 5,500 kg Condition: good to very good Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Kondisi: siap digunakan (bekas), de-technical-characteristics-Maximale-Traglast-150-kg-Motorleist ung-4-kW-Abnahmehohe-950-mm-Mindestaufnahmehohe-am-Boden-auf-Pale tte-Maximale-Aufnahmehohe-1200-mm-Mindestabstand-zwischen-den-Sau gplatten-480-mm-Maximalabstand-zwischen-den-Saugplatten-1430-mm-A bmessungen-der-Saugplatten-370-x-570-mm-Drehung-des-Hebebalkens-2 70°-einstellbar-Auslegerarm-langlich-3400-mm-Masthohe-3200-mm-Ant rieb-und-Motoren-Gesamtabmessungen Cpedpfek Rtnaox Aa Tew

Kondisi: baru, Tahun pembuatan: 2024, Hydraulic Press Brake PBO-3220-CNC Delem DA-58T Technical Specifications - Nominal force: 2000 kN - Maximum bending length: 3200 mm - Throat depth (distance between tool and rear wall): 320 mm - Maximum beam stroke: 200 mm - Maximum open height: 480 mm - Distance between frames: 2600 mm - Maximum backgauge travel: 600 mm - Motor power: 15.0 kW - Length: 3300 mm Cpodpfx Aajipxzpj Tow - Width: 1800 mm - Height: 2900 mm - Weight: 10,500 kg Tooling - Front sheet supports: 2 units - Backgauge position adjustment (X axis): servo drive - Beam adjustment (Y axis): servo drive - Backgauge finger height adjustment (R axis): manual - Punch clamping system: AMADA-type quick-release Delem DA-58T Control - Advanced operator assistance based on algorithms - Extended graphical simulation of bending operations - Operator guidance - Algorithms for reducing production cycle times - Automatic crowning Manual Crowning (optional*) This feature ensures the bent workpiece maintains a consistent bending angle along its entire length. Automatic Crowning (optional*) Allows the control unit to monitor automatic crowning, ensuring optimal value is set at all times. OCS Oil cooling system – ensures stable machine parameters even during prolonged operation. Expert Support We maintain constant contact with our customers, offering hours packages for Otinus expert support with every machine purchase. Visit and Test Our Machines Participate in a live demonstration with a qualified Otinus technician who will present the full functionality of the machine. You are welcome to provide technical drawings and sample material. Scope of Supply: Two-day operator training and commissioning - Day 1 (up to 8 hours) – commissioning and control training. - Day 2 (up to 8 hours) – independent machine operation under the supervision of our technician, with the possibility to program your own parts. Telephone consultation with a specialist - From 7:30 to 21:00 (Mon–Sat) – 8 hours included, to be used within 12 months. Free rental of transport rollers and two jacks for easier positioning of the machine at the customer’s facility. Rollers and jacks are provided upon request (minimum 7 days prior to delivery). Terms of Sale - 24-month warranty period - Delivery time: approx. 6–8 weeks unless the machine is marked as available from stock. - Factory-new machine - Seller’s warranty and post-warranty service - The customer is responsible for unloading the machine and transport on site.

Kondisi: baru, Tahun pembuatan: 2024, Hydraulic Press Brake PBO-2563-CNC OT-41 Technical Specifications - Rated Pressure: 630 kN - Maximum Bending Length: 2500 mm - Throat Depth (Distance between Tool and Rear Panel): 250 mm - Maximum Ram Stroke: 120 mm - Maximum Open Height: 370 mm - Distance between Side Frames: 2000 mm - Maximum Backgauge Travel: 600 mm - Motor Power: 5.5 kW - Length: 2600 mm - Width: 1400 mm - Height: 2200 mm - Weight: 3700.0 kg Tooling - Front Supports: 2 pcs. - Backgauge Positioning (X-Axis): Servo-driven - Ram Positioning (Y-Axis): Servo-driven - Stop Finger Height Adjustment (R-Axis): Manual - Punch Clamping System: Quick-Release, AMADA Type CNC OT-41 Control The Otinus CNC controller features a user-friendly and intuitive interface. The software automatically calculates the bending angle. The large color touchscreen is clearly visible from any viewing angle. Manual Crowning (optional*) This feature ensures a consistent bending angle along the full length of the sheet. Automatic Crowning (optional*) Allows the control system to monitor and automatically adjust crowning, ensuring optimal settings at all times. OCS – Oil Cooling System The oil cooling system guarantees stable machine performance even during prolonged continuous operation. Professional Support We maintain continuous contact with our customers. With every machine purchase, we offer a block of specialist consulting hours provided by Otinus technicians. Visit and Test Our Machines Take part in an exclusive demonstration session with a qualified Otinus technician to showcase the machine's full functionality. You are welcome to bring technical drawings and sample materials. Included with the Machine: A 2-day operator training and commissioning - Day 1 (up to 8 hours): Commissioning and training on the control system - Day 2 (up to 8 hours): Hands-on operation under the supervision of our technician – including programming of specific components Telephone support by a specialist - Available Mon–Sat, 7:30 a.m. to 9:00 p.m. – includes an 8-hour consulting package, to be used within 12 months Csdpfxegi Dpho Aa Topw Complimentary rental of transport rollers and two jacks to facilitate machine installation at the customer’s site. Rollers and jacks are provided upon request (at least 7 days prior to delivery). Terms of Cooperation - 24-month warranty period - Delivery time: approximately 6–8 weeks Not applicable if the machine is marked as available from stock. - The machine is brand new - Warranty and post-warranty service provided by the seller - The customer is responsible for unloading and moving the machine onsite.

Tahun pembuatan: 2024, Kondisi: baru, Parameter: JSW-1500 Laser power: 1500W Laser source lifespan: 100,000 hours Laser wavelength: 1064 - 1070nm Cable length: 10m (15m available upon request) Operating temperature: -10 - 45℃ Operating humidity: 10 - 90% Positioning: laser pointer (red dot or line) Shielding gas: Nitrogen / Argon / Oxygen Power supply: Single-phase 220V 50/60 Hz Maximum total power consumption: 8.2KVA/37.3A Average power consumption: 4.9KVA Device operation status indicators: Cpedpfx Aaetwzhvo Tjw status indication for water chiller, protective mirror temperature, controller temperature Weldable sheet thickness: 0.5 - 8mm Maximum gap width: ≤2mm Laser beam width for cleaning function: 0 - 70mm Cooling method: water-cooled Control method: touch panel / monitor and PLC Wire feeder: fully automated Device weight: 175kg Machine dimensions: Height 800mm, Width 540mm, Length 900mm. Material processing capabilities for JSW 1500W welding function Material: Stainless steel 0.5 - 5mm Carbon steel 0.5 - 5mm Galvanized sheet 0.5 - 5mm Aluminum 0.5 - 4mm Price includes: • Selected JSW welding system • Laser source [MAXPhotonics or Raycus] • Automated wire feeder • Working gun with operating modes: welding, cleaning, cutting • Integrated cooling system • Touchscreen control panel with Polish menu • Set of welding nozzles • Spare protective glasses • OD6+ protective goggles • OD8+ welding mask • 24-month warranty