Pengeboran dan penggilingan mesin

HBM BF 45 Profi DRO

Kondisi: bekas, Contact grinding wheel dimensions: 50 x 100 Ø mm Drive motor: 380 V, 0.7 kW Gbjdpsb Tcv Hjfx Ah Rsi Required space: 650 x 550 x 1050 mm

Kondisi: bekas, Fungsionalitas: tidak berfungsi, Tahun pembuatan: 1971, The abbreviation LARC stands for Lighter Amphibious Resupply Cargo. This refers to the rear ramp of the vehicles, which allowed the military to transport a truck or other military equipment. The XV following LARC indicates the maximum transportable weight: 15 tonnes. The vehicles are constructed from aluminium and have the following precise dimensions: 13.71 m in length, 4.41 m in width, and 4.70 m in height (American measurements: 45 ft x 15 ft x 14 ft). The original LARC vehicles were equipped with two Cummins 8-cylinder diesel engines, each producing 300 hp. This enabled the vehicles to achieve a top speed of 48 km/h on land and 9.5 knots on water, which is approximately 18 km/h. The unladen weight of the vehicle is 22 tonnes. The maximum permissible weight is 35.5 tonnes. The previous owner intended to convert the boats to a fully electric drive system to organise sightseeing tours on the Wadden Sea. Approximately €200,000 was invested, however the project was not completed. The diesel engines have been removed and are no longer available. Battery packs are present and partially installed. Gbjdpjxcgy Hjfx Ah Rji It is not known exactly what work still needs to be completed.

Kondisi: baik (bekas), Tahun pembuatan: 2005, Hurco machining center VMX 1, condition as shown in pictures Gbsdpfx Ahev Nzuco Rsi

Kondisi: bekas, Combined profile steel shear and punching machine GEKA type HYD 80 / Hydracrop 80/A Mach. no. 9566 Year of manufacture approx. 2000 Punching force 80 tons Throat depth 300 mm Punching up to Ø 40 mm in 14 mm sheet Flat bar shear 450 x 15 mm Angle steel shear 130 x 130 x 13 mm Square shear 45 x 45 mm Round bar shear Ø 45 mm Rectangular notcher up to 12 mm Motor power 5.5 kW Electrical connection 400 Volt, 50 Hz - Back gauge with electric stroke release 500 mm - Work table with back gauge at punching station 550 x 380 mm - Working height at punching station 1100 mm - Work table with back gauge at rectangular notcher 550 x 400 mm - Working height rectangular notcher 930 mm - approx. 21 various punching tools - Operating instructions - Original paintwork, not repainted Required space L x W x H 1800 x 1150 x 1950 mm Weight 1.7 tons Gsdpfx Aorz Tutjh Rjbi Very good condition

Kondisi: baru, WMD45 - ROGI Drilling and Milling Machine Drilling capacity ----- 45 mm Face milling capacity ----- 80 mm End milling capacity ----- 32 mm Table dimensions ----- 800 x 240 mm T-slot dimensions ----- 14 mm Spindle taper ----- ISO30 Max. distance spindle - table ----- 460 mm Spindle travel ----- 120 mm Head tilting ----- Left / Right 90 Degrees Longitudinal table travel ----- 560 mm Cross table travel ----- 230 mm Speed range 75 - 3200 rpm Weight ----- 350 KG Motor ----- 1.1 KW Voltage ----- 400V-3PH INCLUDES * Drill chuck with arbor ISO30 - B16 * Left / Right switch * Spindle guard * Fine adjustment Gsdpfx Ajga T Aneh Robi * 2-speed motor * Drift key * Tapping function * Digital depth stop * CE plug OPTIONS * Base cabinet * Milling vice * Milling holder ISO30 + 12 collets in case * Milling cutter set

Kondisi: bekas, ALZMETALL AB 4 SV Column Drilling Machine Machine no. 14805 Year of manufacture: approx. 1980 Drilling capacity: 40 mm Spindle taper: MK 4 - quick quill Throat depth: 340 mm Quill stroke: 180 mm Table size: 710 x 560 mm Column diameter: 160 mm Spindle speed: 30 - 765 rpm, infinitely variable Motor power: 2.3 and 3.4 kW, pole-changeable Electrical connection: 380 Volt, 50 Hz - Spindle speed adjustable via 2 motor speeds and stepless variator gearbox - Back gear with 2 transmission stages for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed rates: 0.1 - 0.2 - 0.3 mm/rev - Table height adjustment via hand crank - Machine base with machined workpiece mounting surface - LED lighting unit Space requirement (L x W x H): 1200 x 725 x 2050 mm Gbedpfx Ahen N Ekco Rei Weight: 615 kg In good condition

Kondisi: bekas, Tahun pembuatan: 1996, Maximum punching force: 55 t Godpfjwgkq Tox Ah Rsbi Notching: 10 mm Hole diameter and thickness: 40x10 mm Flat steel: 300x15 or 200x20 mm Angle steel 90°: 120x120x10 mm Angle steel 45°: 70x70x7 mm Round bar: 40 mm Square bar: 40 mm Strokes per minute with 20 mm stroke: 37 /min Throat depth: 250 mm Machine weight approx.: 1,800 kg

Kondisi: bekas, Lathe for metal Gsdpfx Ahjrdmm Do Rsbi

Kondisi: bekas, Clamping plate, scribing/marking plate, surface plate, measuring table, welding table, straightening plate - Clamping plate comes from a measuring machine - Width: 1335 mm - Length: 3000 mm - Height: 250 mm - Plate thickness: 40 mm Gbodefc T Tqspfx Ah Roi - Plate is reinforced with support ribs - Includes 4 adjustable leveling feet - Quantity: 1 piece available - Transport dimensions: 3000 x 1335 x H750 mm - Weight: 2749 kg

Kondisi: sangat baik (bekas), Drilling capacity - 20 mm Spindle mount FEHLMANN Spindle speeds 50–6300 rpm Throat depth 276 mm Cross table 530 x 255 mm Digital readout Various accessories Gjdpfsuy Sazsx Ah Rjbi MARCELS MASCHINEN CH