Pusat permesinan - universal

HEDELIUS RS 60 K- 2000

Kondisi: bekas, Tahun pembuatan: 1994, Cutting diameter: 520 mm Bandsaw blade length: 7239 mm Cutting width: 1.3 mm Control: POSIMOD Square cutting capacity: 520 x 520 mm Feed length: 500 mm Multiple feed length: 4500 mm Minimum cut-off length: 6 mm Residual workpiece length min./max.: 10 / 100 mm Rsdpfx Answm Rm Ij Iocf Cutting speed: 20 - 130 m/min Bandsaw blade dimensions: 7239 x 50 x 1.3 mm Saw motor: 5.5 kW Total connected load: 10.0 kW Machine weight approx.: 3.8 t Machine dimensions (L x W x H): 3.42 x 2.30 x 2.40 m - 2-column guided - Accessories: Infeed roller conveyor, 2500 mm long, chip conveyor, coolant system

Kondisi: baik (bekas), Tahun pembuatan: 2005, Machine as per photos Condition: Very good, apart from a defective slot in the tool magazine. Redevf D Anepfx An Ijcf Tool holders included.

Kondisi: baik (bekas), Tahun pembuatan: 2008, Pusat Pemesinan Universal Jenis mesin: DMG DMU 60 monoblock Kontrol: Heidenhain iTNC 530 Tahun pembuatan: 2008 Tersedia: segera DATA TEKNIS Pergerakan sumbu Sumbu X: 730 mm Sumbu Y: 560 mm Sumbu Z: 560 mm Sumbu B: ° Sumbu C: 0,001° Jumlah sumbu terkontrol: 5 Rentang putaran: 12.000 rpm Tipe dudukan alat: SK 40 Penukar alat otomatis Jumlah tempat alat: 60 Meja putar NC: Ø 600 Ukuran meja: 1.000 x 600 mm Beban maksimum meja: 500 kg Fitur perlengkapan Konveyor serpihan Pendinginan internal (IKZ): bar Filter pita kertas Probe pengukuran: Heidenhain TS 649 Roto Clear Pengukuran alat Pistol semprot serpihan Penyedot kabut oli Rjdpfx Aeziy Iqen Iecf Mode operasi: 4

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, jam operasional: 346 h, jumlah sumbu: 5, This 5-axis Hurco CNC TMX 8 MYSi was manufactured in 2023. It features a maximum turning diameter of 508 mm and a turning length of 560 mm, with a main spindle speed of 4,500 rpm and a sub-spindle speed of 6,000 rpm. The machine is equipped with a 12-station tool turret and has rapid traverse rates of 24 m/min in the X axis. If you are looking for high-quality turning and milling capabilities, you should consider the Hurco CNC TMX 8 MYSi turn-mill center. Contact us for further details. • X-axis travel: 203 mm Rodpfx Anjym T Ito Iecf • Y-axis travel: ±55 mm • Z-axis travel: 560 mm • W-axis travel: 640 mm • Rapid traverse X/Y/Z/W: 24 / 12 / 30 / 30 m/min • Positioning accuracy: 0.01 mm • Repeatability: 0.005 mm • Maximum turning diameter: 508 mm • Maximum turning length: 560 mm • Max. workpiece diameter over bed: 335 mm • Tool turret: VDI 40 • Number of stations: 12 • Max. driven tool speed: 5,000 rpm • Driven tool power: 6.3 kW • Driven tool torque: 28 Nm • Maximum main spindle speed: 4,500 rpm • Maximum sub-spindle speed: 6,000 rpm • Synchron spindle speed: 2,500 rpm • Main spindle power (S6 / S1): 25 / 17.2 kW • Sub-spindle power (S6 / S1): 15 / 11 kW • Main spindle torque (S6 / S1): 239 / 164 Nm • Sub-spindle torque (S6 / S1): 102 / 75 Nm • Main spindle chuck size: 203 mm • Sub-spindle chuck size: 150 mm • Main spindle bar capacity: 64.5 mm • Sub-spindle bar passage: 46 mm • Electrical supply: 400 V, 50 Hz, 3 phase • Largest motor: 22 kVA • Largest motor current: 32 A • Full load: 58 kVA • Full load current: 83 A • Short-circuit resistance: 5 kA RMS symmetric • Interrupt capacity: 10,000 A • Maximum ambient temperature: 35 °C • Coolant tank capacity: 203 L • Machine weight: 7,500 kg • Transport weight: 8,250 kg • BMT65 holders are included, swivel holders are not included.

Kondisi: baik (bekas), Tahun pembuatan: 2006, Pusat pemesinan Hurco VMX 30 dengan sumbu ke-4 Kitagawa, pendingin melalui spindle (IKZ), ragum NC 125, berbagai holder alat, kondisi terawat Rcjdpfoxrcnlox An Isf

Kondisi: baik (bekas), Tahun pembuatan: 1995, Mesin bubut CNC siklus MONFORTS KNC 6, tahun 1995. Kontrol: Monforts MTC K. Jarak antara senter: 2000 mm. Diameter ayun maksimum di atas tempat tidur: 630 mm. Diameter ayun maksimum di atas dudukan pelana: 380 mm. Putaran spindle: 2–1800 rpm. Motor spindle: 21/15 kW. Lubang spindle: 71 mm. Chuck tiga rahang FORKARDT 400 mm. Pemegang alat Multifix ukuran C dengan 3 slot alat. Kebutuhan ruang: panjang 4000 mm, lebar 2200 mm, tinggi 1900 mm. Berat sekitar 5000 kg. Dokumentasi mesin lengkap tersedia. Mesin dapat didemonstrasikan dalam kondisi hidup. Rjdpehktd Nefx An Iecf

Kondisi: hampir baru (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 760 mm, diameter putar di atas sled silang: 630 mm, diameter pembubutan: 376 mm, daya motor spindle: 18 W, kecepatan spindel (min.): 40 rpm, kecepatan spindel (maks.): 4.000 rpm, lubang spindel: 81 mm, jarak pergerakan sumbu X: 260 mm, jarak lintasan sumbu Y: 110 mm, jarak gerak sumbu Z: 830 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 10 m/menit, pergerakan cepat sumbu Z: 30 m/menit, jenis arus masuk: tiga fasa, saluran batang: 81 mm, tinggi total: 2.170 mm, panjang total: 4.400 mm, lebar total: 2.100 mm, berat keseluruhan: 6.650 kg, diameter spindel: 254 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Mesin bubut bekas CNC dengan 6 sumbu, dilengkapi dengan spindel belakang, perkakas bermotor, sumbu Y, dan pengendali CNC FANUC 0i-TF PLUS. Rcsdpfx Anszrmiao Isf

Tahun pembuatan: 2002, Kondisi: baik (bekas), Manufacturer: Matsuura Model: LX-O Rcedpfjlz Rvlex An Ief Control: YASNAC Year of manufacture: 2002 Specifications Metric US Standard X-axis travel: 330 mm Y-axis travel: 300 mm Z-axis travel: 250 mm Table length: 540 mm Table width: 320 mm Table load capacity: 100 kg Feed rate X-axis: 90,000 mm/min Feed rate Y-axis: 90,000 mm/min Feed rate Z-axis: 90,000 mm/min Tool holder: ISO 30 / BT / MK Spindle power: 7.5 kW Spindle speed: 40,000 rpm Tool changer: 30 positions Chip conveyor: Yes Dimensions (approximate) Length: 2,800 mm Width: 2,600 mm Height: 2,800 mm Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, no representations or contractual terms are implied. We recommend verifying all important details.

Tahun pembuatan: 1990, Kondisi: hampir baru (bekas), Gebrauchte Schuler Hydraulikpresse zu verkaufen Hersteller: Schuler Modell: Schuler EB 2-500-2,75-0,85 H-Rahmen-Hydraulikpresse Presskraft: 500 Tonnen Rcjdpfxshcnxrj An Iof Tischabmessungen (x-y/mm): 3000 × 1800 Stößelabmessungen (x-y/mm): 3000 × 1800 Hub (x/mm): 850 Hübe pro Minute: von 12 bis 24 Steuerung: Siemens S7 Neue Hydraulikpressen verfügbar

Tahun pembuatan: 1992, Kondisi: baik (bekas), nomor mesin/kendaraan: 29-0288, Offer 04612 Technical Specifications: - Cutting range at 90°: round 260 mm - flat 450 x 240 mm Redpsgin Ndjfx An Iocf - Cutting range at 45°: round 230 mm - flat 240 x 200 mm - Machine is mounted on original rotary base - Saw band dimensions: 3660 x 25 x 0.9 mm - Cutting speeds: 20 / 35 / 50 / 70 m/min - Hydraulic lifting and lowering of the saw frame - Cutting pressure steplessly adjustable: 0 - 10 m/min - Total drive power: 400 V / 0.8 kW - Coolant device - Required space (approx.): W 2100 x H 1200 x D 1000 mm - Weight (approx.): 500 kg