Mesin wide belt sander Heesemann EH 51.11

Heesemann EH 51.11

Kondisi: baru, Technical data: Working width: 1100 mm Abrasive belt size: 1120x2150 mm Max working height: 160 mm Steel calibration roller diameter: 150 mm Rubber roller diameter: 150 mm Sanding pad width: 50 mm Total motor power for both sanding units: 11 kW Abrasive belt speed: 16/18 m/s Feed motor power: 0.55 kW Hodpfx Alegtm U Ao Ijl Continuously adjustable feed belt speed: 4-20 m/min Work table lift motor power: 0.25 kW Pneumatic pad, lifting/lowering: YES

Kondisi: bekas, Tahun pembuatan: 2000, unit pemasok bekas Tahun pembuatan: 2000 cocok untuk mesin pengamplasan tepi Kündig Uniq Hodjumpp Eepfx Al Isl Data teknis: jangkauan maksimum: 1050 mm jumlah rol pemasok: 4 diameter rol: 120 mm lebar rol: 60 mm jarak pegas rol: 25 mm jumlah tingkat kecepatan: 8 (2/4/5,5/6,5/11/13/16,5/33 m/menit) daya motor: 0,75 kW koneksi: 400V/50 Hz berat: 32,5 kg Konsol yang terlihat di foto tidak termasuk dalam pengiriman! Lokasi: Flörsheim Ketersediaan: Segera

Kondisi: baik (bekas), Tahun pembuatan: 1992, Single-piece sanding machine Top and bottom sanding Electric height adjustment with digital display Continuously adjustable feed speed Star-delta start Pneumatic belt tensioning Main switch Sanding belt oscillation Finish brush unit, top and bottom, manual height adjustment Hsdpfxewyda Us Al Iol Working width: 190 mm Working height: 4 – 150 mm Min. workpiece length: approx. 280 mm Sanding belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 – 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Including infeed and outfeed roller conveyor, L = 1600 mm, non-driven Note on used machines: • Specifications are subject to errors and prior sale. • Stated prices are ex-works, loaded free of charge. • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any guarantee or warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and phone number!)

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, lebar penggilingan: 1.300 mm, tinggi penggerindaan: 160 mm, jenis penyesuaian ketinggian: listrik, panjang sabuk penggiling: 2.150 mm, Heesemann JSM 1350 RC Surface Sanding Machine Year of manufacture: 2025, brand new machine, currently the only exhibition machine available in Europe! - Electronic height adjustment via terminal: 3 - 160 mm - Infinitely variable feed speed: 3 - 12 m/min - Sanding units equipped with separate motors and infinitely variable belt speed up to 18 m/s - Infeed and outfeed table extensions - Industrial PC 15.6" - Program memory for 100 programs - Remote service - Contact roller unit with steel roller Hsdpfewcqr Asx Al Iol Sanding belt dimensions: 2,150 x 1,370 mm Belt speed: 18 m/s Drive power: 15 kW Diameter: 160 mm - Longitudinal sanding unit Sanding belt dimensions: 2,150 x 1,370 mm Belt speed: 18 m/s Drive power: 15 kW Front calibration roller Ø 160 mm, rubberized (65° Shore hardness), grooved - Energy Management System (EMS) - Doors with glass inserts - LED lighting inside the machine - Vacuum table pre-configured (drilled) for vacuum blower connection - Vacuum blower (integrated in machine) - Workpiece cleaning with oscillating air nozzle - CSD (Magnetic pressure beam) The machine is connected and can be inspected on site by appointment. Please do not hesitate to contact us if you have any questions.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, Stair Milling Machine SELECT 20800 for mortising treads and risers into stair stringers and posts. The machine is equipped with stops for tread length, tread thickness, riser length, riser thickness, and nosing projection. Both a tread and a riser can be milled in a single clamping operation in approximately 1 minute. Clamping the workpiece takes just one second. This machine is the ideal solution for professional staircase manufacturers. Hjdpfxowut Abo Al Isl Voltage: 3-phase, 400 V Maximum clamping height: 300 mm.

Kondisi: baik (bekas), 0749 Hedpfxoh T Dzqe Al Ijl

Tahun pembuatan: 2001, Kondisi: hampir baru (bekas), Dual-aggregate sander, two lower aggregates, each with 2 x 7.5 kW main power, feed motor 4 kW, lifting and lowering motor 2 kW. The machine has been refurbished; the conveyor belt is in very good condition. Fitted with a new graphite pad. The machine features two bottom-mounted aggregates: the first is a rubber contact roller, the second is a combi system with a graphite pad. Working sanding width: 630 mm. Two feed speeds: slow and fast. Sanding belt length: 1900 mm. Pneumatic oscillation. Pneumatic belt tensioning. Sanding belt speed: 18 m/s. Conveyor belt feed speed: 9/20 m/min. Number of sanding pads: 1. CE conformity declaration. Rated total power: 21 kW. Max working height: 160 mm. The machine is equipped with two lower working rollers. Conveyor belt with upper feed system. Hedpfxofxpbmo Al Iel

Kondisi: bekas, Tahun pembuatan: 2001, Lebar pelat pantul: 4000 mm Tinggi pelat pantul: 1000 mm Dimensi luar: 4600 x 1500 mm 2 x 1,5 kW motor Aliran volum nominal total: 7000 m³/jam Konektor ekstraksi kanan dan kiri dengan diameter 300 mm Lokasi penyimpanan: Garbsen Hjdpfjvvizkox Al Iol

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Compact wide belt sander with combination sanding unit Special features: - Switching the sanding pad on and off from the control panel - Switching the roller on and off from the control panel - Electronic controller Fox 500 KTR - Table extension with 2 rollers for infeed and outfeed - Automatic table positioning via pushbutton Article number: 5222100A2 Suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard equipped with diagonally grooved steel roller Ø 120 mm for calibration Fine adjustment of working height Clear control panel at the front Robust monoblock steel machine frame with tubular reinforcement, robot-welded, with working units mounted high for maximum rigidity Motorized height adjustment of working table with digital display Electronically controlled sanding belt oscillation Carpet feed via gear motor with two speeds Natural rubber feed carpet with negative profile Flexible steel pressure bar in front of the first unit Rubber pressure rollers before and after each processing unit Hsdpogf Sw Njfx Al Isl Pneumatic belt tensioning per unit with decimal correction for grit/belt thickness Universally usable for solid wood and veneer thanks to combination unit Entry-level model for smaller companies Working width 950 mm Equipment details Combination unit for calibration and sanding Diagonally grooved steel roller Ø 120 mm with fine height adjustment Hard sanding pad with graphite covering Universal version for calibration and sanding of solid wood, chipboard, and veneer Technical data Length (product) approx. 1388 mm Height (product) approx. 1668 mm Width/depth (product) approx. 1545 mm Dust extraction connection Extraction nozzle diameter 140 mm Electrical data Connection voltage 400 V Power type AC Phase(s) 3 Ph Network frequency 50 Hz Feed motor power 0.33 / 0.55 kW Table height adjustment motor power 0.25 kW Main drive motor power 7.5 kW Sanding unit Sanding belt length 1525 mm Max. sanding width 950 mm Sanding belt width 970 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Min. workpiece height 4 mm Max. workpiece height 170 mm

Kondisi: bekas, Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, Maschinen in einer Linie verbunden (alle drei Maschinen werden nur zusammen verkauft). 1. Furnier-Querdurchlauf-Fügeautomat Fisher+Rueckle FZR-15, Baujahr 2009 2. Direktstapelvorrichtung Fisher+Rueckle DAR-22, Baujahr 2009 3. Scherenhubtisch 1000 kg TECHNISCHE DOKUMENTATION (vollständig auf Anfrage) Furnier-Querdurchlauf-Fügeautomat FURNIMASTER FZR-15 Furnierformat Länge (längs zur Faser): 350 - 1500 mm Furnierformat Breite (quer zur Faser): 50 - 500 mm Furnierstreifenstärke: 0,3 - 1,5 mm Maximale Maschinenleistung: 30 Takte/min (Die Leistungsangaben beziehen sich auf eine durchschnittliche Furnierstreifenbreite von 100 mm quer zur Faser) Hedpjt Akcfefx Al Iel Anschlussleistung (Grundmaschine): Leistung: 13,5 kW Druckluft: 6 bar Energieverbrauch: Elektrisch: 6,2 kWh Druckluftversorgung: 15 NL/min Abmessungen und Gewicht (Grundmaschine): 2940 mm L x 1000 mm B x 1530 mm H. 3200 kg Stapelvorrichtung DA-2200 Furnierformat Länge (längs zur Faser): 600 * - 1500 mm Furnierformat Breite (quer zur Faser): 500 * - 2200 mm Maximale Stapelbreite für Ausgabe auf der - rechten Seite: 2200 mm - linken Seite: 2200 mm - Rückseite: 1500 mm Stapelhöhe max.: 500 mm Stromversorgung erfolgt über FZR-15 Gewicht: 1200 kg Hubtisch: 2500 mm L x 1200 mm B. 1000 kg