Mesin uji universal / Mesin uji tarik

Hegewald & Peschke Inspekt Table Blur 5

Universal testing machine Inspekt Table Blue 5kN

Mechanical construction:

- 2 backlash-free ball screw spindles, driven by DC servo motor, Fmax = 10 kN, stiffness 10 kN/mm
- 1 test area up to nominal load:
- Test area width: 420 mm
- Maximum test stroke without test tools, adapters, and KMZ: 1025 mm

Travel speeds:

Redpfxeyyu I Ns Ad Rer
- Test speed: 0.0015 - 1000 mm/min at full load
- Return speed: 1000 mm/min

Force measurement:

- Measurement range: within 0.8 - 100% of nominal load, Class 1 (optional Class 0.5)
(+/- 1% of the displayed value according to DIN EN ISO 7500-1)
- Force measurement resolution: +/-180,000 digits at 20 ms integration time

The machine is supplied with a factory test certificate. If a factory or DKD calibration is required at the installation site upon customer request, this service will be charged separately.

Crosshead travel measurement:

- Incremental square wave input with encoder monitoring, storage of crosshead position
- Travel measurement resolution: 1 µm

Dimensions (WxDxH) / Weights:

- Load frame: 685 mm x 550 mm x 1420 mm / 100 kg - Controller mounted on load frame

Standard features:

- Force, displacement, and strain control
- Overload protection, automatic force calibration
- Specimen break detector, return function
- Set-up operation via control panel with display (force, travel)

Data processing:

- USB 2.0 interface or LAN
- Data transfer rate to PC: 50 Hz (standard), optionally higher data acquisition frequency via special software module
- Internal data processing rate: 2 ms
- Optional: up to 2 free slots for expansion cards (1-channel analog cards or 2-channel digital cards) available for additional sensors

115/230 VAC, 0.5 kVA, 50/60 Hz, 5-40°C, 20-80% relative humidity

Options required for operation: Load cell, specimen grips, PC (current standard, OS 8-10-11, testing software)

Load cell 5000 N
- Measurement range: 5-5000 N tension and compression, with nominal 2mV/V output signal
- Overload protection: +/-100%, linearity: +/-0.05%, hysteresis: +/-0.03%, repeatability: +/-0.02%,
- including 1.5 m connection cable and calibration certificate

With extensometer MFX 200

The MFX 200-B extensometer, with its robust design and high measurement accuracy, is suitable for nearly all specimens from an initial gauge length of 10 mm. All elongations can be recorded from the modulus of elasticity up to specimen break. Use in both the lower and upper test area is unrestricted. In combination with the MFQ-A, r- and n-value determination is also possible for thin sheet metals. Two different measurement systems are available which differ in the measurement signal and other technical data (see technical documentation).

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.