Mesin meninju otomatis - kolom ganda

Helmerding KDH 315/2100/2

Tahun pembuatan: 2008, Kondisi: bekas, Pressure 315 t Stroke 40-200 mm Strokes per Minute 20-100 spm Slide Adjustment 120 mm Slide Surface 2000x1100 mm Table Surface 2000x1200 mm Die Pass-Through in Table 1700x250 mm Installation Height Bottom, Slide Adjustment Top 500 mm Side Frame Passage 820x650 mm Cedpfsrdi Dlsx Aqxjgw Total Power Requirement 45 kW Machine Weight approx. 44 t Hydraulic Clutch-Brake Combination Hydraulic Overload Protection in Slide Semi-Automatic Stroke Adjustment Motorized Slide Adjustment Frequency-controlled Stroke Rate Central Flow Grease Lubrication for Guides Oil Circulation Lubrication Slide Balancing Cylinders Front/Rear Safety Doors Hydraulic Die Clamping System Extendable Table Plate Hydraulic Roll Block Rails in Table Helmerding EWH800/150 Servo Feeder (V-1341-6518) Strip Width: 100-800mm, Strip Thickness: 0.5-6.0mm, Max. Cross Section: 1600mm² Intermittent Airing, Height Adjustment via Gear Motor Straightener R-70/800/9-S (R-1343-6518) Strip Width: 100-800mm, Strip Thickness: 0.5-4.0mm, Max. Cross Section: 1600mm² at 450N/mm² Straightening Speed, frequency-controlled up to 25m/min Strip Infeed Aid: Transfer Table with hydraulically adjustable peeling wedge Hold-down hydraulically adjustable Strip Side Guide: 1 pair of lateral roller guides adjustable by handwheel Feed Rollers: 2x rollers Ø140mm, pneumatically adjustable Straightener: 9x rollers Ø70mm, manual adjustment by handwheel Uncoiler HE-4/800/MOT/HYD (H-1342-6518) Strip Width: 100-800mm Max. Load: 4t Coil Inner Diameter: Ø508mm Coil Outer Diameter: Ø1000-1600mm Drive, frequency-controlled Limiting Arms Hydraulic Expansion Hydraulic Pressure Arm

Tahun pembuatan: 2016, Kondisi: siap digunakan (bekas), The Coiltech Decoiler Straightener Feeder System is a compact feeding solution designed for press applications. Strip width: 600 mm, material thickness: up to 6.5 mm, straightening rollers: 7 x 115 mm, decoiler capacity: 6,000 kg, inner coil diameter (min-max): 470–520 mm. Connected load: 7.5 kW, supplied with documentation. Cjdpfji El Ucsx Aqxegw

Kondisi: bekas, Tahun pembuatan: 2007, Pressing force 200 t Throat depth 510 mm Stroke 16 - 160 mm Ram adjustment 120 mm Table area 1500 x 1000 mm Table height above floor 900 mm Die opening in table 800 x 250 mm Ram area 1000 x 700 mm Ram pin hole 65 x 110 mm T-slot width 28 mm Adjustable stroke rate 30 - 120 min Hydraulic unit oil capacity 5 l Installation height (full stroke up, ram adj. up) 600 mm Installation height (stroke down, ram adj. up) 440 mm Total power requirement 32.2 kW Machine weight approx. 24 t Space requirement approx. WxDxH 2.85 x 3.1 x 3.65 m - hydraulic clutch - fixed table - hydraulic overload protection in ram - hydraulic connecting rod clamping - motorized ram height adjustment 120 mm with digital display for set ram height, rapid and inching mode - fully automatic stroke adjustment, range 16 - 160 mm - ram weight compensation - electronic TDC correction - planetary gearbox - oil circulation central lubrication Cgsdpfovbk Rwsx Aqxjw - separate control panel with SIMATIC S7/300 screen control - pressing force measuring device - reversing circuit (return) - additional operating mode “setup – inching mode” - electric stroke counter - electric preset counter - electric connecting rod pin travel limiter - electronic cam controller - continuously variable drive (frequency controlled) - 2 sockets - clamping plate - main bearing / support bearing / connecting rod bearing temperature monitoring - operating hours counter - oil cooler - set of vibration elements Additional equipment: Electronic roller feed ebu EVX 500 Passage width: 10 - 500 mm Material cross-section: max. 1,600 mm² Material thickness: 0.2 - 5.0 mm Number of rollers: 2 Roller diameter: 100 mm Air gap: up to over 300 l/min Feed length: 1.0 - 9,999.9 mm Feed speed: max. 150 m/min

Kondisi: sangat baik (bekas), 1 Cgedpfjt Eix Rsx Aqxsw

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Press force: 2,000 kN Table size: 2,300 x 1,100 mm (W x D) Pass-through openings: 2 pcs. 700 x 300 mm Distance between uprights: 2,460 mm Ram mounting surface: 2,300 x 1,100 mm Lateral passage: 740 mm Installation height: 550 mm (stroke down, adjustment up) Stroke rate: 30 - 140 strokes/min, infinitely variable Stroke: 20...220 mm Ram adjustment: 150 mm (motorized) Main drive: 30 kW Weight: approx. 27,500 kg Design features: • Control system Siemens + Beckhoff • 8-way slide guide • Motorized oil circulation lubrication • Automatic ram adjustment • Hydraulic overload protection • Pneumatic ram counterbalance • Electromechanical stroke adjustment • Control system Siemens + Beckhoff • Visualization Beckhoff Panel • T-slots in table and ram (28 mm, spacing 300 mm) • Vibration-damping machine feet • 4 pcs. tool safety devices + 4 pcs. cam outputs • Ram with 20 mm wide central slot • Hydraulic tool clamps on table and ram • Hydraulic roll blocks for tool change Strip feeding line by Kemmerich, consisting of: Decoiler Type: V 5000 A – SH – 600 - S Load capacity: 5,000 kg Strip width: 100 - 600 mm Expansion range: 470 – 520 mm Coil outside diameter: 2,000 mm Codpev T Anlsfx Aqxjgw • Auxiliary drive motorized • Pneumatic disc brake • Hydraulic expansion via sliding wedges • Rear locating disc and 3 removable guide arms at the front • Hydraulically actuated and driven pressure roller, laterally adjustable via handwheel • Coil car (stationary, decoiler moves hydraulically), lift height 770 mm with 4 guide rods Straightening machine Type: RMBMZ 50.600 UF Strip width: 40 - 600 mm Strip thickness: 0.5 – 4.0 mm Max. cross-section: 1,200 mm² Number of rollers: 9 pcs. Roller diameter: 50 mm Number of feed rollers: 2 pcs. Feed roller diameter: 100 mm Speed: 3 - 25 m/min Design features: • Rollers hardened, ground, and hard-chromed • Drive of lower straightening and feed rollers via gear transmission • Motorized adjustment of roller block via motors, adjustment accuracy 0.01 mm, values can be stored • Upper rollers openable by 100 mm • Entry feed roller pneumatically openable • Lateral strip guidance at entry with handwheel and threaded spindle • Exit roller basket and loop bridge • Loop control via ultrasonic sensor • Entry aid, hydraulically actuated, consisting of table with extendable tongue and upper bending roller Roll feeder Strip width: max. 600 mm Design features: • Rollers hardened, ground, and chromed • Drive by gear motor • Upper roller hydraulically openable • Hydraulic height adjustment • Lateral strip guidance at entry with handwheel • Roller basket Additional features: • Pneumatically swiveling loop bridge between straightener and feed • Safety fence surrounding the entire line • Decoiler and straightener on common base frame • Various spare rollers for the straightening machine The complete line can be inspected under power at the owner’s location!

Kondisi: bekas, Tahun pembuatan: 1983, de-machinery-specs-1 Cjdpfxjxh Swho Aqxegw

Kondisi: baru, Tahun pembuatan: 2025, tinggi total: 3.700 mm, penyesuaian silinder hidrolik: 150 mm, tinggi pemasangan: 650 mm, tinggi meja: 854 mm, lebar total: 2.479 mm, panjang total: 4.186 mm, panjang meja: 2.000 mm, lebar meja: 1.200 mm, lebar sabuk konveyor: 350 mm, gaya penekanan: 250 t, panjang langkah: 250 mm, jarak antara dudukan samping: 920 mm, jarak antara penyangga: 2.040 mm, berat keseluruhan: 31.000 kg, tegangan kontrol: 24 V, Standardised 250-ton stamping press with fixed stroke at an attractive price. Cost-optimised basic configuration without enclosure or safety gates, designed for use within a soundproof cabin. Optional accessories available, such as safety gates/enclosure, press force measurement, die change/clamping system, etc. Cjdpfewb Dh Ijx Aqxsgw For technical specifications and details of offered accessories, please refer to the PDF documents. Delivery time: 6 months.