Pasteurizer Aliran Otomatis HERMIS

HERMIS H&G

Tahun pembuatan: 2020, Kondisi: baru, Fully assembled, ready-to-plug-in complete system mounted on a mobile stainless steel baseplate with juice pump, featuring a 63 kW Wolf oil boiler, 2 heat exchangers, holding section for approx. 20-30 seconds with automatic control unit, comprising: Heating circuit, heating circuit pump and expansion vessel, 2 plate heat exchangers for juice pre-heating/cooling and heating up to 80 °C. 24 m holding section, automatic pneumatic temperature regulation. Ffjdpfx Ascx R Ddobhju Capacity: 5,000 l juice per hour (depending on juice inlet temperature).

Tahun pembuatan: 2018, Kondisi: bekas, 2-vessel brewhouse mounted on a stainless steel frame as a brew block. This setup consists of the following components: - Mash/lauter tun made of stainless steel for mashing in, mashing, and draining the mash. Independent control of the thermo-oil heated jackets and bottom. The double-walled vessel is clad with insulation and features a polished interior surface. The top-mounted motor drives the cutting and stirring unit with stepless speed regulation. For lautering, there is a multi-piece perforated false bottom and a rectangular side manway for spent grain removal. Additionally, the vessel is equipped with a hinged lid, CIP spray head, temperature probe, and spraying unit. - Stainless steel wort kettle/whirlpool. The vessel is double-walled and features welded heating zones in both jacket and base, heated with thermo-oil. It is also insulated and equipped with a temperature probe, hinged lid, CIP cleaning head, spray unit, height-adjustable locking mechanism, and a tangential wort inlet for knockout. The inner surface is polished. - Single-stage plate heat exchanger for cooling wort from 100°C to 18°C while simultaneously heating water from 13°C to 77°C. The wort from one brew can thus be cooled within approximately one hour. Plates are made of stainless steel 1.4401 (AISI 316) and seals are EPDM. The wort chiller features a PT1000 temperature sensor. - Thermo-oil heater to heat the laser-welded heating zones of the brew vessels. Approximately 50-65 liters of oil are electrically heated in the thermo-oil tank to a maximum of 150°C. A safety switch automatically stops heating when 160°C is exceeded. The vessel is equipped with temperature and level sensors. A pump circulates the thermo-oil in a closed loop. - 12 hl hot water tank, standing separately on three legs, with a manway on top. The tank is heatable, insulated, and equipped with a hose level indicator, temperature probe, and hot water pump. - Centrifugal pump for product transfer between vessels and for CIP cleaning, with a motor power of 0.37 kW and stepless speed control. - Stainless steel piping and manual valves for redirecting product flows. Pipes are orbitally welded with polished inner surfaces. - Control unit with 10” touchscreen and PLC for brewhouse automation, housed in a stainless steel control cabinet. The following processes can be controlled and monitored: 1. On/off of agitator and cutting unit, and speed control. 2. Temperature control of mash/lauter tun. 3. Temperature control for kettle/whirlpool (separate for jacket and base). 4. On/off for product and CIP pump and speed control. 5. Display of inlet water temperature. 6. Display of wort temperature at outlet. 7. Temperature control of the thermo-oil tank. 8. Timer settings. 9. Mash program settings (multi-step mashing with up to 5 rests; adjustable times, temperatures, agitator and pump speeds). 10. Hot water tank temperature. Fsdjw Tbmdjpfx Abhsfu Machine (additional): Compact brew block with hot water tank Max. wort output: 5 hl Power: 38 kW Length: 2877 mm Width: 1476 mm Height: 1952 mm Operation / control: control cabinet with PLC and touchscreen Material: stainless steel 1.4301 (AISI 304) Base structure: brew block on stainless steel frame, hot water tank separate Equipment: mash/lauter tun; wort kettle/whirl...

Tahun pembuatan: 1992, Kondisi: bekas, Plate heat exchanger for milk processing Ffedeh Eulgjpfx Abhsu

Kondisi: bekas, Tahun pembuatan: 2006, Folding machine Heidelberg TH82/6-4-VFZ, Year 2006 Fodpfxouhiqwe Abhofu - Round pile feeder - Folding configuration: 6 - 4 buckle plates, 1 knife folding unit - Press delivery: TH70 - Online video inspection available via Skype We would be pleased to welcome your visit – more machines available in stock. Immediately available – Inspection possible. Located in Emskirchen / Nuremberg – Test run available.

Kondisi: sangat baik (bekas), Control: D.Electron Z 32 Center height: 220 mm Distance between centers: 1000 mm Swing diameter over bed: 440 mm Swing diameter over cross slide: 245 mm Travel - Z axis: 750 mm Bed width: 320 mm Ffsdpfxjd Sitko Abhju Spindle mount: CL 6" Spindle bore: 62 mm Spindle speeds: 0 – 2000 rpm Rapid traverse X/Z: 7 m/min Tailstock quill travel (manual): 200 mm Tailstock quill diameter: 80 mm Tailstock taper: MK 4

Tahun pembuatan: 2021, Kondisi: diremajakan ulang (bekas), - Luas filtrasi: 130 m² - Modul keramik - Porositas: 0,2 mikron (standar) Kapasitas: - Anggur putih: 7.000 – 10.000 L/jam - Anggur merah: 5.000 – 8.000 L/jam - Jus anggur: 4.000 – 5.000 L/jam - Jus buah: 4.500 – 6.500 L/jam Fodpov Nirisfx Abhsfu - Filter direkondisi pabrik - Garansi 12 bulan untuk semua komponen mekanik - Mesin dalam kondisi seperti baru

Kondisi: baru, Tahun pembuatan: 2023, tinggi total: 1.850 mm, masa garansi: 12 bulan, tegangan masuk: 380 V, daya: 1,5 kW (2,04 hp),

Kondisi: seperti baru (mesin pameran), Centrifugal pump Alfa Laval Material: Stainless steel Fsdpfxehryyho Abhsfu Medium: Fruit concentrate/fruit juice Flow rate: 20,000 l/h Delivery head: approx. 25 m Power: approx. 3 kW Speed: approx. 2,900 rpm Inlet/outlet: DN50 1 stainless steel tank, vertical, cylindrical, closed 1 stainless steel base frame for pump and tank

Kondisi: diremajakan ulang (bekas), linck_v18_de_verkauf Fodpfx Abjrvh Tmohsfu

Tahun pembuatan: 2017, Kondisi: sangat baik (bekas), Bluhm Weber Legi-Air 4050 Labeling Machine Additional units in stock! Year of manufacture: 2016–2019 Print resolution: 8 dots/mm (203 dpi) 12 dots/mm (300 dpi) 24 dots/mm (600 dpi) Print speed: Up to 400 mm per second Tamp sizes (mm): Tamp-blow standard from 12.5 x 7 to 160 x 300 mm. Label lengths must be limited accordingly. For certain label qualities, longer or smaller labels are possible with special tamps. Label gap: Minimum 3 mm Label roll: 300 mm diameter, up to 450 linear meters, core 76 mm (3"), outside winding (optional inside winding) Data interfaces: RS232, RS422, RS485, Ethernet Optional: Profibus Dimensions (L x H x W): 770 x 560 x 580 mm Applies to systems with 250 mm stroke Ffjdsfp A I Ejpfx Abhsu Controller display: Multilingual operator guidance 5.7" VGA touch display Service interval indicator Retrieve, edit, and store label data USB port for storage device or keyboard Compressed air connection: 6 bar; compressed air must be clean, dry, and oil-free.