Mesin gergaji pita

HESSE by BEKA-MAK BMSY 560 C

Kondisi: baik (bekas), 001 Iiedpfxextu Ero Aa Ded

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1969, Tinggi pusat: 355 mm Jarak pusat: 3000 mm Diameter putar maks. di atas alas/cekungan/sleding alas: 715/790/520 mm Lubang spindle: 86 mm Konektor spindle sesuai DIN 55027: Ukuran 11 Kone taper pada pinol tailstock: MK 5 21 kecepatan spindle: 5,6 - 560 rpm 42 kisaran feed memanjang/rata: 0,09 - 5,6/0,045 - 2,8 mm 22 ulir Whitworth: 2 - 28 Gg 28 pitch ulir metrik: 1 - 14 mm 27 pitch ulir modul: 0,25 - 3,5 modul 32 ulir modul: 4 - 56 modul 32 ulir diametral pitch: 8 - 112 DP Motor penggerak dengan perubahan kutub: 380 V, 7/11 kW Bobot sekitar: 7 t Kebutuhan ruang sekitar: 6000 x 2300 mm Iedpfxjxpuu Es Aa Deid

Kondisi: sangat baik (bekas), Tahun pembuatan: 1996, lubang spindel: 160 mm, Drehdurchmesser Bett Ø 1040 mm Drehdurchmesser Schlitten 710 mm Drehdurchmesser Grube Ø 1580 mm Drehlänge 3000/4500 mm Grubenlänge 1500 mm Spindelbohrung 160 mm Leistung Spindel 40 kW Bettbreite 800 mm Spindelaufnahme 6 Mk Werkstückgewicht 3500 Drehzahl 800 Rpm Vorschub X - Achse Iodpfxjxtbf Es Aa Dsid 10000 mm/min. Vorschub Z- Achse 10000 mm/min.

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), Horizontal spindle diameter: 100 mm, horizontal spindle speed: 3,600 rpm, horizontal spindle power: 25 kW, horizontal spindle torque: 920 Nm. Vertical milling spindle swivel range: +/-90°, vertical spindle diameter: 90 mm, vertical spindle speed: 3,600 rpm, vertical spindle power: 25 kW, vertical spindle torque: 920 Nm. Travel X/Y/Z: 1,500 mm / 500 mm / 450 mm, feed rate X/Y/Z: 4,000 mm/min, feed force X/Y/Z: 12 kN / 12 kN / 15 kN, rapid traverse X/Y/Z: 15 m / 10 m / 10 m/min. Table dimensions X/Y: 1,800 mm / 500 mm, number of T-slots: 5, center slots: 18H7, clamping slots: 18H9, center distance: 100 mm, table load capacity: 2,000 kg. Distance spindle-table (horizontal): 450 mm; distance between spindle and counter-support lower edge (horizontal): 345 mm; distance vertical spindle lower edge-table: 350 mm–800 mm; distance column brush to vertical spindle center: 100 mm–600 mm. Machine dimensions X/Y/Z: approx. 3,400 mm / 2,900 mm / 2,600 mm, weight: approx. 5,600 kg, control: Heidenhain, Operating hours: 61,440 h. An on-site inspection is possible. Iiodpfxsulku He Aa Ded

Kondisi: sangat baik (bekas), Tahun pembuatan: 1976, b28f6e01 Iisdpfxoy Ivdus Aa Dod

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, jam operasional: 1.000 h, jarak pergerakan sumbu X: 360 mm, jarak gerak sumbu Z: 980 mm, produsen pengendali: SIEMENS, model controller: 840D Solution Line, jumlah sumbu: 4, This 4-axis SPINNER TC800 was manufactured in 2009. It features a radial turret and is equipped with a Siemens control system, ensuring reliable operation. With approximately 1,000 operating hours, this machine has seen very little use. If you are looking for a high-quality lathe, consider the SPINNER TC800 horizontal turning machine we have for sale. Contact us for further details. • Control: Siemens 840D Solution Line • X-axis travel: approx. 360 mm • Z-axis travel: approx. 980 mm • Rapid traverse X-axis: approx. 18 m/min • Rapid traverse Z-axis: approx. 24 m/min • Main spindle speed: up to approx. 4,000 rpm • Main spindle power: approx. 24 kW (100%) • Main spindle power: approx. 33 kW (40%) • Spindle nose: A8 • Bar capacity: approx. 77 mm • Sub-spindle: Yes • Sub-spindle speed: up to approx. 5,000 rpm • Sub-spindle power: approx. 15 kW • Sub-spindle nose: A6 • Sub-spindle bar capacity: approx. 52 mm • Turret type: VDI 50 • Number of tool stations: 12 • Driven tools: Yes • Number of driven tools: up to 12 • Driven tool speed: up to approx. 4,000 rpm • Max. turning diameter: approx. 500 mm • Max. swing over bed: approx. 800 mm • Max. turning length: approx. 800 mm • Tailstock: Yes • Tailstock taper: MK4 • Tailstock stroke: approx. 100 mm • Tailstock force: approx. 8,500 N • Voltage: 400 V Isdpfjyv Epvsx Aa Dsid • Frequency: 50/60 Hz • Control voltage: 24 V DC • Compressed air pressure: approx. 6-10 bar • Hydraulic pressure: approx. 70 bar • Chip conveyor: Yes • Coolant system: Yes • Hydraulic unit: Yes • Electrical cabinet: Yes • Radial turret head • No quill • Barely used, about 1,000 operating hours Technical Specification: Counter Spindle: Yes Driven Tools: Yes

Kondisi: bekas, Tahun pembuatan: 2022, translation_1 Isdpfoyq Sxxex Aa Dsid

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jam operasional: 10.779 h, kecepatan spindel (maks.): 3.500 rpm, jarak pergerakan sumbu X: 362 mm, jarak gerak sumbu Z: 1.250 mm, daya motor spindle: 28.000 W, berat keseluruhan: 6.000 kg, produsen pengendali: SIEMENS, model controller: 840D SL, jumlah slot dalam magazin alat: 12, jumlah sumbu: 3, This 3-axis DMG NEF 600 was manufactured in 2012. It features a turning length of 1200 mm and a powerful integrated spindle motor with a maximum spindle speed of 3500 rpm. The machine is equipped with a 12-station disc turret and can be fitted with driven tools, enhancing its versatility. If you are looking for a high-quality lathe, you should consider the DMG NEF 600 horizontal lathe we are offering for sale. Contact us for further details. • Turning length: 1200 mm • Main spindle: Integrated spindle motor • Turret: 12-station disc turret • Toolholder standard: VDI 40 • C-axis brake: Hydraulic • Tailstock: Automatic • Coolant system: Coolant system with chip tray • Operating software: ShopTurn • Control panel: ERGOline operating panel • CAD reader: External PC compatible • Hydraulic unit: Included for chuck and steady rest • Hollow chuck: Hydraulic • Maximum draw tube diameter: 95 mm • Coolant spray gun: Included • Chip conveyor: Discharge to the right • Chip conveyor discharge height: 1250 mm • Steady rest type: Self-centering steady rest • Steady rest range: Ø 50-200 mm • Chuck type: 3-jaw power chuck • Chuck model: ROTA-NCK plus • Tool spindle 1: 90° angled driven toolholder • Tool spindle 2: Straight 0° toolholder • Tool spindle applications: Drilling, milling, and thread cutting • Toolholder shank standard: DIN 69880-40 • Cooling unit for electrical cabinet: Up to 40°C Isdpfx Aaoy Twc Ns Djid • DMG Netservice on board: Installed OPTIONAL Approx. 100 various toolholders (VDI holders) available Technical Specification Counter spindle: No Driven tools: Yes

Kondisi: baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, Saeilo Dialog H 66 Kontrol: Siemens 840DSL dengan ShopTurn Diameter putar di atas tempat tidur: 600 mm Jarak antara pusat: 2.000 mm Panjang pembubutan: 1.980 mm Tahap transmisi: 2 Iodpfxjy D I Hmj Aa Djid Lubang spindel: 105 mm Kecepatan putar: 2.500 rpm Torsi: 18,5 kW

Kondisi: baru, Tahun pembuatan: 2025, vágási_átmérő_650_mm Iijdpjy S Duijfx Aa Dod