Pers bengkel - hidrolik

HESSE by LFSS DPM-K 1070-150

Kondisi: seperti baru (mesin pameran), Hydraulically height-adjustable welding turntable, 3000 kg capacity - Speed range: 0.05 to 0.6 rpm - Table diameter: 1200 mm - Tilt angle: 0 to 120° Hedpfedvn E Uox Aanonl - Total height adjustment: approx. 700 mm - Height adjustment (with vertical plate to center): 960 mm to approx. 1910 mm - Dimensions with horizontal plate: 1200 mm to 1900 mm

Tahun pembuatan: 2026, Kondisi: baru, Ovens for curing, as shown in the photos, can vary in price depending on size, configuration, and optional features. At ROMER, we produce both standard models and fully customized solutions tailored to your process needs. Simply provide us with your part dimensions, line capacity, curing profile, and available floor space, and we will recommend the optimal setup and options that deliver real improvements in daily performance. Control and Monitoring - Real-time control of temperature, time, airflow, and operating modes—featuring alarms and recipe storage for repeatable cycles. Heating Module - Rapid heat-up and stable temperature using efficient heating elements for fast energy transfer. Air Circulation - Uniform airflow ensures minimized temperature variance and consistent coating quality. Insulation and Construction - Advanced chamber design reduces heat loss for quicker setpoint achievement and lower energy consumption. Safety and Certification - Equipped with sensors, interlocks, and protective logic to maximize operational safety and reliability. High Efficiency - Optimized heat transfer and minimized losses result in tangible energy savings. Automatic Start - Programmable scheduling enables automatic preheating before shifts, streamlining production startup. Self-Latching Doors & Intelligent Chimney - Prevents unintentional opening; chimney operates only when necessary for increased safety. ECO Mode - Low-consumption standby mode cuts energy use by up to 20%, depending on the process. Inspection Window and Lighting - Enables inspection without opening the door, reducing heat loss and simplifying supervision. Guide Rails & Automatic Heat Hood - Heat hood activates only during loading to avoid temperature drop; automated rail infeed enhances ergonomics and loading speed. Multi-Zone Heating - Independent zone control for precise curing of parts with varying mass and geometry. MTS System - Heating elements installed without thermal bridges for higher efficiency and faster heat-up times. 2-in-1 Split Chamber - Movable partition provides two independent zones—allowing drying and curing in a single unit, maximizing flexibility. VFD Ventilation - Variable fan speed control based on chamber conditions for improved accuracy and reduced power consumption. Hnodpfx Aaefy T H Ionol

Tahun pembuatan: 2026, Kondisi: baru, Ovens for curing, as shown in the photos, can vary in price depending on size, configuration, and optional features. At ROMER, we produce both standard models and fully customized solutions tailored to your process needs. Simply provide us with your part dimensions, line capacity, curing profile, and available floor space, and we will recommend the optimal setup and options that deliver real improvements in daily performance. Control and Monitoring - Real-time control of temperature, time, airflow, and operating modes—featuring alarms and recipe storage for repeatable cycles. Heating Module - Rapid heat-up and stable temperature using efficient heating elements for fast energy transfer. Air Circulation - Uniform airflow ensures minimized temperature variance and consistent coating quality. Insulation and Construction - Advanced chamber design reduces heat loss for quicker setpoint achievement and lower energy consumption. Safety and Certification - Equipped with sensors, interlocks, and protective logic to maximize operational safety and reliability. Hsdpfxofz Anpe Aanjnl High Efficiency - Optimized heat transfer and minimized losses result in tangible energy savings. Automatic Start - Programmable scheduling enables automatic preheating before shifts, streamlining production startup. Self-Latching Doors & Intelligent Chimney - Prevents unintentional opening; chimney operates only when necessary for increased safety. ECO Mode - Low-consumption standby mode cuts energy use by up to 20%, depending on the process. Inspection Window and Lighting - Enables inspection without opening the door, reducing heat loss and simplifying supervision. Guide Rails & Automatic Heat Hood - Heat hood activates only during loading to avoid temperature drop; automated rail infeed enhances ergonomics and loading speed. Multi-Zone Heating - Independent zone control for precise curing of parts with varying mass and geometry. MTS System - Heating elements installed without thermal bridges for higher efficiency and faster heat-up times. 2-in-1 Split Chamber - Movable partition provides two independent zones—allowing drying and curing in a single unit, maximizing flexibility. VFD Ventilation - Variable fan speed control based on chamber conditions for improved accuracy and reduced power consumption.

Kondisi: baru, Tahun pembuatan: 2025, Natural gas-powered powder coating oven. The oven is designed for the polymerization of powder coatings. It is equipped with a state-of-the-art heat exchanger, made entirely from AISI 1.4301 acid-resistant stainless steel, ensuring exceptionally high efficiency. Working dimensions (mm): 1500 (W) x 5000 (D) x 2000 (H) Technical Specifications: • Power supply: 400V 50Hz • Riello 90 kW burner • Operating temperature: 210 °C • Maximum temperature: 230 °C • Premium 150 mm thermal insulation Equipment: • Overhead conveyor, • Convection system (ensures uniform temperature throughout the oven, accelerating the heating process of parts), • Safety locks for secure opening and closing, • Time module, • Thermoregulator (controls and maintains the internal temperature at the set level), • For easy transport, the oven is equipped with rails. Pvxgim CHOOSE BUMEX SP. Z O.O. Premium quality machinery among those available on the market. Professional consultation and service. Warranty. Warranty and post-warranty service. Complete technical documentation. 100% customer satisfaction. All BUMEX SP. Z O.O. products are CE certified. We offer our own transport – prices are quoted individually for each offer. Invoices with VAT shown separately. Short delivery times! Machines can be ordered in various custom configurations and dimensions! Hnodpfxjh Igq Rj Aanjl Contact us.

Kondisi: baik (bekas), en-GB: Manufacturer: WMW Zeulenroda Model: PYE 160 SS Year of manufacture: 1980 C-frame construction Die height: 850 mm Bolster plate thickness: 100 mm Throat depth (C side): 360 mm Specifications Metric | US Standard Capacity: 160,000 Table length: 1,250 mm Table width: 600 mm Ram stroke: 500 mm Approach speed: 100 mm/min Working speed: 10 mm/min Hnedpfx Aaewp Nv Hsnsl Return speed: 125 mm/min Motor power: 22.5 kW Dimensions (approximate) Length: 2,150 mm Width: 1,250 mm Height: 3,600 mm Weight: 7,500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is supplied in good faith, but accuracy cannot be guaranteed. As such, no representation or contractual obligations are implied. We recommend verifying all critical details.

Kondisi: baru, panjang total: 6.000 mm, diameter rotor: 500 mm, Die Auswuchtmaschine 97VK1000 ist ein High-Tech-Gerät, das für Service- und Reparaturunternehmen konzipiert wurde, die auf die Instandhaltung von industriellen Antriebswellen mit einem Gewicht von bis zu 1000 kg spezialisiert sind. Sie ermöglicht eine präzise und effiziente Auswuchtung von Kardanwellen, verkürzt die Reparaturzeit und sorgt für eine hohe Produktivität der Arbeitsabläufe. Die Auswuchtmaschine 97VK1000 ist die perfekte Kombination aus modernster Technologie, Zuverlässigkeit und Vielseitigkeit und ist somit ein unverzichtbares Werkzeug für Ingenieure und Techniker im Bereich Wartung und Reparatur von industriellen Kardanwellen. HIGHLIGHTS 1. Hartlagerbauweise: Die 97VK1000 ist mit einer präzisen und zuverlässigen Hartlagerbauweise ausgestattet und eignet sich hervorragend zum Auswuchten von Wellen mit großen Anfangs-Unwuchten. 2. Universelle Bauweise und Ausrüstung: Die 97VK1000 besitzt eine universelle Ausrüstung, um Wellen mit Flanschen unterschiedlichster Formen und Größen auszuwuchten. Spezielle Aufnahmen und Adapter ermöglichen Kardanlängen bis 6000 mm und Flanschdurchmesser bis 500 mm. 3. Schneller und effizienter Auswuchtprozess: Dank kurzer Unwucht-Messzyklen ermöglicht die 97VK1000 schnelle und präzise Korrekturen, verkürzt die Reparaturzeiten und steigert die Produktivität im Service und in der Wartung. 4. Sicherheit und Bedienkomfort: Spindelhubgetriebe sorgen für Komfort und Arbeitssicherheit, der asynchrone Frequenzumrichter erlaubt eine stufenlose Drehzahlregelung ohne Motorstopp und stellt optimale Betriebsarten für das Auswuchten bereit. MESSUNG UND STEUERUNG • Wir erleichtern das Auswuchten – der Hauptvorteil unserer Auswuchtsysteme. • Der Auswuchtprozess wird in Echtzeit angezeigt, das Unwuchtverhalten des Rotors kann am Bildschirm überwacht werden, um das bestmögliche Ergebnis zu erzielen. • Maximale Empfindlichkeit der Maschine in jeder Betriebsphase, Einrichtung und Kalibrierung erfolgen durch den Bediener. • Die Messergebnisse sind unempfindlich gegenüber äußeren Schwingungseinflüssen; ein hoher Schutz vor verschiedensten Störungen ist gewährleistet. • Die Bedienung und Wartung kann schnell und einfach von jedem Mitarbeiter erlernt werden. Hedpfxjwc T Ute Aanonl TECHNISCHE DATEN Auswuchtbares Wellengewicht: 50 – 1000 kg Maximaler Rohrdurchmesser: 300 mm Maximaler Flanschdurchmesser: 500 mm Maximale Kardanwellenlänge: 6000 mm Minimal erreichbare Restunwucht: 10 g*mm/kg Rotordrehzahl: 300 – 1000 U/min Motorleistung: 11 kW Netzanschluss: 380V, 3 Ph, 50Hz Reparieren Sie industrielle Antriebswellen? Dann können wir Ihnen zusätzlich einen Montage-Schweißtisch für schwere Wellen anbieten. Kontaktieren Sie uns für ein individuelles Angebot! 👇

Kondisi: baru, Tahun pembuatan: 2026, The main features, functions, and advantages of the welding positioner are as follows: Hsdpfx Ajrigmgeansnl Functions: 1. Directional rotation switch: Allows control over the rotation direction of the positioner turntable. 2. Rotary direction selector switch: Enables changing the direction of the turntable’s rotation. 3. Stepless speed control of the turntable: This feature allows adjustment of the turntable's rotational speed to suit specific tasks. 4. Compact and robust design: The sturdy construction ensures the device’s durability and reliability. 5. Foot pedal control: Facilitates easy operation and control over the positioner. 6. Thermal fuse: Provides additional operational safety. 7. Brushed motor: The brushed DC motor is effective for various applications. 8. Tilt range of the turntable from 0 to 90°: The ability to tilt the turntable from 0 to 90 degrees is useful for welding in different positions. 9. Option for mounting a centering chuck: Allows for additional centering of workpieces. Advantages: 1. Increased work efficiency: The positioner helps boost productivity in assembly and welding processes. 2. Reduced production costs: Automating or facilitating the rotation of workpieces can contribute to lower production costs. 3. Repeatability of weld joints: The device ensures consistent quality and uniformity of joints. 4. Versatile application: Adjustable rotation speed and direction provide flexibility for various tasks. 5. Improved working conditions for welders: Enables more ergonomic and comfortable welding positions for the operator. Set includes: 1. PS-500 positioner unit 2. Foot pedal control 3. Power cord 4. User manual 5. Boom with welding torch holder The CORMAK PS-500 positioner is a valuable tool in industries requiring rotation and positioning of components, especially during welding processes. It helps enhance productivity, lower costs, and improve work quality. Technical specifications: - Maximum load: 300 kg - Table diameter: φ500 mm - Tilt angle: 0° ~ +90° - Rotational speed: 0.2 ~ 2.5 rpm - Rotational drive power: 200 W - Tilting: manual - Voltage: 220V-1PH-50Hz - Torch support: included - Dimensions: 700 x 650 x 710 mm - Weight: 97 kg *Three-jaw chuck is not included in the set.

Kondisi: baik (bekas), Tahun pembuatan: 1998, panjang ulir: 65 mm, de-to-hu+it+lt_001 Hnsdpfxox H Rmue Aanjl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0044, berat benda kerja (maks.): 200 kg, jarak pergerakan sumbu X: 1.800 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 1.100 mm, tinggi total: 2.455 mm, panjang total: 3.000 mm, lebar total: 3.760 mm, tinggi benda kerja (maks.): 250 mm, lebar benda kerja (maks.): 750 mm, panjang benda kerja (maks.): 550 mm, jenis arus masuk: tiga fasa, berat keseluruhan: 3.700 kg, panjang pemakanan sumbu X: 350 mm, panjang umpan sumbu Y: 250 mm, panjang umpan sumbu Z: 256 mm, Perlengkapan: dokumentasi / manual, unit pendingin, 1 Hnsdpfxex S Ehkj Aanjl

Kondisi: sangat baik (bekas), Live center Manufacturer: Röhm Morse taper: MK 6 1 tip 60 degrees 1 tip 90 degrees Hodpfx Asgviq Nsanonl Overall length: 340 mm Weight: 8.5 kg