Bor engsel Hettich Blue Max

Hettich Blue Max

Kondisi: bekas, Tahun pembuatan: 1992, Number of spindles per row: 16 Number of horizontal spindles: 5 Kodpfjwv Nb Nex Aahjnf Cup hinge boring head: yes Drill spacing: 32 mm Hold-down device: yes / pneumatic Power consumption: 2.2 kW Drilling unit: swiveling

Kondisi: baru, Thread diameter M3 - M16 mm Continuously variable speed up to 187 rpm Kedpfx Asfg U Sqjahenf Working range 180 - 2000 mm Motor power 0.7 kW Electric tapping machines for threads M3 - M16, Adjustable angle. 9 quick-change chucks with slip clutch. Settings via display: Variable speed, adjustable depth, material selection, selection of main rotation direction, thread selection. Optional: Clamping table with T-slots: 990x700x800 mm. Magnetic base. Also available for: M14 to M24 and M27 to M33.

Kondisi: baik (bekas), Tahun pembuatan: 2000, Used Hettich Blue Max 8 Fitting Drilling Machine Manufacturer: Hettich Model: Blue Max 8 FS Number of inline spindles: 5 pcs Inserting die Workpiece clamping cylinders: 2 x pneumatic Drilling feed: pneumatic Stop rulers Swing stops Kjder Igt Dopfx Aahjnf Foot pedal operation Space requirement: approx. 1200 mm x 700 mm x 1500 mm Weight: approx. 150 kg Some drill bits included The stops are not visible in the photos, but are included. Location: ex stock 54634 Bitburg - Immediately available -

Kondisi: bekas, Tahun pembuatan: 2009, Mesin bekas Tahun pembuatan: 2013 Perlengkapan dan data teknis: - Sistem gir bor yang dapat diganti untuk: - Baris lubang - Engsel - Pelat pemasangan - Fitting penghubung - Koneksi depan - Gir baris lubang dapat digunakan diputar 90° - Penahan bawah pneumatik - Sistem gir bor dengan pergantian cepat untuk modul bor vertikal - Gir bor vertikal: Daya motor 1,6 kW - Gir bor vertikal: Kecepatan sekitar 2.780 rpm - Catu daya: 400 V, 3 fase, 50 Hz - Kedalaman bor maksimum / pengaturan Y: sekitar 550 mm - Sambungan hisap debu: 100 mm Dimensi: sekitar 940 x 1560 x 980 mm Knsdpfxexwz Nxe Aahef Berat: sekitar 125 kg Informasi di atas bersifat tidak mengikat hingga mesin tiba di gudang kami. Ketersediaan: Sekitar pertengahan/akhir Januari 2026 Lokasi stok: Hessen

Kondisi: baik (bekas), For fully automatic assembly of frame components. Frame outer dimensions: min. 120 x 120 mm max. 700 x 2,500 mm Kodpfx Aedhdg Ijahonf

Kondisi: sangat baik (bekas), Fitting drilling machine Blue Max mini Max. operating pressure: 6 bar / 100 PSI Hettich system Ksdpfx Aaeizwwqehsnf pneumatic material clamp pneumatic drill feed with stop ruler

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, nomor mesin/kendaraan: 248, (Fast and efficient drilling of series of holes thanks to the interchangeable 32 mm drilling gear system with continuous extension units) (5-spindle horizontal drilling head allows simultaneous drilling for fittings and wooden dowels) Year of manufacture: 2009 Machine number: 248 Maximum working pressure: 6 bar Ksdot Ebibopfx Aahsnf Depth adjustment up to 550 mm Vertical drilling head motor power: 1.6 kW Horizontal drilling head motor power: 0.75 kW Voltage: 380 V, 3-phase Feed pressure at 6 bar: 296 kg Weight without horizontal drilling device: 95 kg Weight with horizontal drilling device: 118 kg Chip extraction connection diameter: 100 mm Airflow rate: 141 m³/h Air consumption: 1.2 liters per stroke Worktable: 800 x 970 mm Recommended base cabinet height: 950 mm Additional equipment: Extension rulers

Kondisi: baru, Tahun pembuatan: 2024, Drilling machine Kudu with NC control and manual tool change (3-axis). Drilling unit with moving machining head – the table remains stationary, only the drilling head moves. The drilling machine can be operated both manually and fully automatically. After each drilling process, the machining unit automatically moves to the next drilling position on the X- and Y-axis. Operation is extremely user-friendly. Programming is carried out directly at the machine control panel. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,000 mm • Sturdy machine base frame • Drilling head speed: up to 2,800 rpm • Tool holder: HSK 50 • X, Y, and Z-axis powered by servo motors • Rapid traverse speed in X-axis: 18 m/min • Rapid traverse speed in Y-axis: 5 m/min • Distance table top to tool holder bottom: 245 mm • Table width: 450 mm • Working height: 1,005 mm • Drilling diameter: 3–15 mm in St. 50 (tool-dependent) • Y-axis travel: 230 mm • X-axis tolerance: ±0.1 mm/m • Y-axis tolerance: ±0.05 mm • Z-axis tolerance: ±0.05 mm • Machine weight: 2,000 kg • System dimensions: 8,000 mm x 2,000 mm x 2,388 mm (see layout plan) • Power connection: 32 A • Air supply: 8 bar • Front safety via light barrier • Rear access protection, machine guard • Simple on-machine programming • Cooling by minimum quantity spray system • Supplied without material clamps • Digital manual pulse generator Your advantages: • Gentle on workpiece surfaces • Clear, graphical interface • Machining right to the end of the workpiece is no problem • 50% space saving compared to machines with a moving table Knedpsfu Iwmofx Aahsf • Chips collected in chip tray • Easiest programming and operation You are welcome to inspect the equipment at any time in our manufacturing/showroom facility. Please feel free to contact us for an appointment. Plantec Maschinen GmbH

Kondisi: bekas, Used, excellent condition, low hours Manufacturer: Hettich Model: Blue Max mini PM Pneumatic feed Location: 97447 Gerolzhofen, ex stock, unloaded, unpacked Delivery in as-is condition as inspected, without warranty or guarantee. Knsdpfx Aajvwf Dqjhef

Kondisi: bekas, Mesin bekas Mesin bor perlengkapan bekas Hettich Blue Max Daya motor: 0,8 kW Kodpfxjw I Um Tj Aahsnf Kecepatan motor: 2800 rpm 4 spindle bor dengan pembatas panjang satu saklar kaki Matriks penekan TIDAK ADA!! Ketersediaan: sesuai kesepakatan Lokasi: Solingen

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2002, WU Drilling Machines WU 3G Drill – 3 UPPER UNITS Flexible task-specific drilling machines with adjustable spacing for upper, side, lower, and pivoting drilling units, each equipped with multi-spindle drilling heads. Designed to drill all fixture and through holes. The modular construction allows for a wide variety of configurations (working length, number of units, pneumatic clamps, etc.). Suitable for single-stage and multi-stage drilling operations with programmable unit actions tailored to specific requirements. Material feed and removal are performed manually. Other drilling functions run automatically (material clamping, simultaneous 3-sided drilling, clamp release). Spindle pitch as per order, 16 – 44 mm Distance between front (C) units 250 – 2500 mm Unit width (G, B, C, S) 160 mm Feed cylinder stroke JG – 100 mm, JB – 100 (120 mm) Maximum workpiece width 200 mm Maximum workpiece thickness 50 mm Maximum drilling diameter Knedpfx Asi Hqhfoahjf 35 mm Spindle speed 3000 rpm JB unit spindle axis height above table 6 – 35 mm (55 mm) Drilling unit motor power 1.1 kW Single-cycle and double-cycle time 4 – 6 s and 6 – 10 s Required air pressure 0.4 – 0.6 MPa Compressed air consumption 2 m3/h per drilling unit Feed drive type pneumatic, stepless variable speed Supply voltage 400 V, 50 Hz Dimensions (L x W x H) 2200 – 4000 x 1500 x 2000 mm Weight 2500 – 3000 kg Contact the seller Przemysław Kretowicz is online Lignum 602 Show number

Kondisi: bekas, Tahun pembuatan: 1997, Mesin bekas Tahun pembuatan: 1997 Kondisi: telah diperiksa bengkel Knjdpfx Ajw I Ugtsahof Kepala bor fitting Unit bor dengan 3/4 spindle 2 silinder penjepit Daya motor: 0,8 kW Koneksi: 400/50 Volt / Hz Dimensi mesin: Panjang: 950 mm Lebar: 650 mm Tinggi: 700 mm Berat: 80 kg Ketersediaan: segera Lokasi: Röllbach