Alat press pelurus

Hidralmac Richtpresse

Pressure: 150 t
Total power requirement: 20 kW
Machine weight approx.: 11.5 t
Space requirement approx.: 8800 x 1800 x 2200 mm
Pressure adjustment via rotary dial, infinitely variable: 15-150 t
Cylinder diameter: 100 mm
Pressing speed (infinitely adjustable via joystick): 0-9.9 mm/s
Servo motor: 2 kW
Cooling unit: 1 kW
Oil tank (under press table): 350 l
Oil cooling (electric): 1 kW (max)

Profile straightening press 150 T with two hydraulic cylinders.

The straightening machine is prepared for the respective material type by using interchangeable rounded spacer elements. The 10 inserts are changed manually by simply sliding them into the retaining grooves. A basic set for one profile is included in the scope of delivery. The program for the relevant profile is then selected on the monitor. The monitor displays the ideal line and an ascending and descending millimeter scale with 0.5 mm lines. The profile to be straightened is now placed on the left side of the table, pushed against a support, and securely clamped with a quick-clamping device. Both the support and the quick-clamping device are quickly adjustable and mounted on a clamping plate. This clamping plate travels on a linear guide from left to right and vice versa. Transportation is via a chain drive powered by a servo motor. Movement is initiated via a joystick at the control panel.

Once the profile is clamped, the operator moves the clamping plate into the press using the joystick. The travel speed is up to 100 mm per second, but can be infinitely reduced to 10 mm per second. For this, it is sufficient to gently release the control lever. A high-resolution camera now shows the profile in the press. The operator can clearly see any deviations from the ideal line. Depending on requirements, the operator presses or pulls the profile until the desired accuracy is achieved. Subsequently, the operator continues slowly through the press while monitoring on the screen in detail whether the profile is now straight. If necessary, the operator can move forwards or backwards to make further adjustments. Once straightened, the profile exits the press to the right and can be removed. The clamping plate can then be returned to the loading position on the left or loaded from the right to save time.

Operation of the press is only permitted under the following conditions:
Permitted ambient temperature: 5-60 °C
Permitted relative humidity: at 20°C – 90%, at 40°C – 50%
Height of installation location above sea level: +1000 m
Giodpsfxygwsfx Ah Rjp
Permissible mains voltage fluctuations: +/- 10%

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.