Empat kolom Press - hidrolik

Hidrobrasil 300 T Mineralsteinpresse Steinpresse

Kondisi: bekas, Tahun pembuatan: 2017, Technical details: Operating pressure: 12 bar Tank capacity: 200 l Total weight approx.: 220 kg Dimensions (L x W x H): 1.2 x 1.1 x 1.8 m Mobile pressure-blasting vessel – sandblasting unit Blast vessel pressure up to 12 bar Dedevvvrpjpfx Adgsul Test pressure: 17.2 bar Fully equipped with: - Remote control valve - Remote control lever - Electro-pneumatic remote control - Tungsten carbide blasting nozzle Includes 10 m blasting hose ID.

Tahun pembuatan: 2002, Kondisi: hampir baru (bekas), nomor mesin/kendaraan: 16.34.02, 6-fach-6-Schlag-Kopierpresse MULTIPRESS MP610LS Duodpfxsh Tkraj Adgsl Maximaler Abscherdurchmesser (bei 500 N/mm²): 12 mm Maximale Abscherlänge: 105 mm Maximale Auswerferlänge (Matrizenseite): 80 mm Maximale PKO-Länge: 23 mm Maximale Geschwindigkeit: 180 Stück/min

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Hydraulic Punching Machine Brand: Boschert Model: Ecco Line EL 500 Digital Specifications: - Punching force: 28 t - Working table dimensions (width x length): 500 x 1000 mm - Maximum sheet thickness: 6 mm (up to a punch diameter of 40 mm) - Maximum die diameter: 105 mm (up to 1 mm sheet thickness) - Maximum strokes: 180 strokes/min - Connected load: 5 kW - Voltage: 3 x 400 V / 50 Hz - Total weight: 2 tons Dodjrn Swkjpfx Adgsul Dimensions of EL-500-Digital Punching Machine (length x width x height): 2400 x 1580 x 1540 mm Tool cabinet, 4 drawers for tools Foot pedal Includes all accessories shown in the photos.

Tahun pembuatan: 2018, Kondisi: baru, Brand new freeze dryer. Pilot plant. Capacity: 1 kg product/8h. Effective area: 0.15 m² Raw material per 8h: 1 kg. Final dried product per 8h: 0.2 kg. Drying temperature range: 30ºC-100ºC. Material: Stainless steel 304. Maximum vacuum pump capacity: 13 m³/h Water removal capacity: 0.8 kg Djdpfx Asfn Iudedgsul Final condensation temperature: -40ºC Freeze dryer dimensions: 1.1m x 0.7m x 1.5m

Kondisi: baru, Bandsaw machine Dodpecuntzsfx Adgoul Manufacturer: METALLKRAFT Model: BMBS 230 x 280 H-DG Item No.: 3680013 Condition: New machine Cutting capacity (round): 230 mm Cutting speed: 35/70 m/min Standard equipment includes: - Horizontal vice - Length stop (600 mm) - Electromechanical monitoring of saw blade tension - Chip removal brush - Coolant system - Operating manual

Kondisi: bekas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 25.4 [mm] - Max. machining length: 195 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 8.2 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 25.4 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 8.2 [kW] - Minimum C-axis resolution: 0.001 [degrees] Duedpjuha U Hjfx Adgel TOOL HOLDER 1 - Number of positions: 9 - Number of driven positions: 4 - Driven tool speed: 5,000 [rpm] TOOL HOLDER 2 - Number of positions: 8 SUB OPERATIONS - Number of positions: 8 - Number of driven positions: 4 - Driven tool speed: 7,500 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] WEIGHT AND DIMENSIONS - Footprint: 2,912 x 1,300 [mm] - Machine height: 1,720 [mm] - Machine weight: 2,400 [kg] MACHINE HOURS - Power-on hours: 44,140 [h] - Operating hours: 28,118 [h] - Spindle hours: 15,281 [h] EQUIPMENT - Control: Fanuc 31i-B - 3-color status light - Driven tool motorization at: S11, S51 - Driven guide bushing - Parts catcher - Parts conveyor belt - Parts ejector - Chip conveyor - Coolant tank: KNOLL KF 200/1200 * with high-pressure pump - Bar feeder: Tornos Robobar SBF 326 - Fire extinguishing system * NB: Functionality not guaranteed. To be checked by a qualified company engaged by the buyer.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2012, jam operasional: 25.895 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 78 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.500 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 24.000 kg, kapasitas tangki oli: 1.000 l, daya: 55 kW (74,78 hp), laju aliran volumetrik: 930 m³/jam, Technical Data — Baler: Manufacturer: Presona AB Type: LP 80 VHK 1 Year of manufacture: 2012 Total operating hours (machine): 25,895 hours (as of July 2025) Effective pump operating hours: 14,135 hours (as of July 2025) Number of bales produced: 235,597 units (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/hour Throughput under operating conditions: 410 m³/hour Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: 30 kg/m³: approx. 9 to 12 t/hour, material-dependent 50 kg/m³: approx. 14 to 17 t/hour, material-dependent 100 kg/m³: approx. 16 to 25 t/hour, material-dependent Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/hour, material-dependent Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Baler dimensions (installed with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine weight (baler): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. After completion of the work, it was tested during live operation, both in manual and automatic mode. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted Duedpfx Ajvwlqqedgol - Hydraulic oil tank fully drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram disassembled and cleaned - All four running rollers on the press ram replaced - Wire station with guide rollers for the bottom wire cleaned and made operational - Side guides removed from press ram, smoothed, reinstalled and readjusted - Main hydraulic cylinder removed, dismantled and inspected - Piston rod replaced, cylinder tube honed - Complete seal kit replaced, pressure test performed - Hydraulic hose from main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying disassembled, cleaned, wire guide rollers made operational and maintained - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire knives, twister shafts and twister fingers checked, torqued, and serviced - Door contact switches checked and partially replaced - Emergency stop button tested - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers below the baler replaced - New safety grids for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed and baler tested in manual and automatic operation Scope of delivery: Only the baler is for sale. Remarks: All documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete and available. An inspection can be arranged by appointment. We assume no liability for technical specifications or possible errors.

Kondisi: baik (bekas), Manufacturer: OMERA Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Horizontal throat depth (steady arm): 670 mm Vertical throat depth (steady arm): 940 mm Cylinder stroke: 350 mm Column diameter: 200 mm Duodpekvnumjfx Adgel Specifications Metric US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Therefore, these details do not represent warranty or binding contractual terms. We recommend verifying all critical details.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 25.12.15, Fresan FP 100P - C-frame Eccentric Press - 100 Tonnes (1000kN) TECHNICAL DATA: * Capacity: 100 tonnes (1000kN) * Strokes per minute: 60 (adjustable) * Distance between table and slide: 445 mm * Stroke adjustment: 0 - 132 mm * Slide adjustment: 95 mm (motorized) * Table dimensions: 700 x 1000 mm STANDARD SPECIFICATIONS: * Equipment in compliance with CE regulations * Welded steel frame construction * Crankshaft made of alloyed steel AISI 4140 (42CrMo4). Extremely durable and ductile. CNC-ground for minimal surface friction. * High-quality bronze bearings (SnBz-12) * Pneumatic clutch-brake combination * Fully enclosed, helical-geared gearbox in oil bath * Press safety valve * Safety PLC & safety switches & light barriers (Pilz) * 6-point slide guidance with used-oil collector * 7-inch HMI touchscreen control panel * Adjustable stroke rate with AC inverter * Motorized slide adjustment * Mechanical overload protection (hydraulic overload protection can be retrofitted to the standard machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 units) Dujdpfx Asnxh T Redgol * Automatic central lubrication & used-oil collector (circulating oil / slideway oil) OPTIONAL EQUIPMENT: * Extra clamping plate * Parts ejector (upper and/or lower, mechanical or pneumatic) * Material feeder, loading and unloading systems (decoiler, straightening machine, pneumatic or servo feed unit) * Customized machine

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Complete robotic welding cell with rotary table and safety enclosure Robot: KUKA KR 150 R2700 extra Payload capacity: 150 kg Dsdpfx Aonr E Enodgjul Reach: 2,090 mm Includes welding gun (Dalex, new in 2018) with integrated cooling system (closed-loop water cooling) A complete second welding gun (manufacturer: ARO) is also included in the scope of delivery Dedicated cooling unit installed in the system Automatic rotary table with 10-position indexing (currently set up for 5 stations for current production requirements) Workstation for loading and unloading parts is well-illuminated and safeguarded with light barriers Total system control via Siemens PLC, programmed by HS Automation Siemens operator panel for machine operation mounted on swing arm at the loading station Complete system enclosed with safety housing and safety door The system can still be inspected under power/in operation.