Tekan hidrolik

Hidrobrasil 50 Tonnen Doppelständerpresse

If the press does not precisely match your requirements, you can request a customized offer tailored exactly to your needs with just one click:
Contact us for an individual quote.
Hidrobrasil manufactures presses exactly according to your specifications at surprisingly affordable prices!
####
50 T Top Ram Heating Press, constructed in double-column design, suitable for continuous multi-shift operation, with the following key features:
- Single heating level
- Idle speed up to 10 mm/sec (adjustable via rotary regulator)
- Opening speed up to 40 mm/sec
- Initial pressing speed 8 mm/sec
- Table/Heated plate dimensions: 522 mm deep x 522 mm wide
- Ram/Heated plate dimensions: 498 mm deep x 498 mm wide
- 2 electrically heated plates, up to 200°C
- Oil temperature monitoring
- Hydraulic circuit oil cooling
- Dwell time valve: 0 to 3600 sec
- Pressure adjustment from 8 T up to 50 T (50 T = 300 bar)
- Stroke limitation optionally by pressure or position
- Two-hand operation, adjustable or permanently mounted
- Machine body double coated
- Signal tower: Red: Alarm, Yellow: Heating phase, Green: Ready
- Heating plates with electric heating elements, up to max. 200°C
- Installation, commissioning, and instruction available at additional cost
### Technical Data
Gsdpfxetwv S Nj Adqskc

## Design
- Press type: Double-column press

## Thermally Neutral
- Temperature range: 80 – 120°C

## Operator Sides
- Number of operator sides: 1 side

## Forces
- Max. pressing force: 500 kN
- Max. free stripping force: 20 kN
- Pressure build-up time: Max. 3 sec (closed steel on steel tool)

## Dimensions
- Max. opening width: 600 mm
- Stroke and min. opening: 300/300 mm
- Table height above floor with heated platen: 900 mm
- Overall height above floor: approx. 2,500 mm
- Minimum hall height: 3,500 mm
- Parallelism deviation at 20°C: +/- 0.1 mm
- Deflection: < 0.2 mm/m (measured at max. closing force with 70% table load)
- Total weight of press without operating fluids: approx. 2.9 t
- Accessories: 2 heating plates (522 × 522 mm or 498 × 498 mm, max. heating capacity)
- Heating plates equipped with temperature sensors: up to 200°C

## Speeds
- Rapid closing: 10 mm/sec
- Max. pressing speed: 8 mm/sec

## Sound Level
- Sound pressure level measured at 1.5 m height at control panel per DIN 45635-T16-KL3: max. 78 dB(A)

## Hydraulics
- Number of press cylinders: 1 pc
- Max. operating pressure: 250 bar
- Pressure build-up time: max. 3 sec
- Pressure accuracy during pressing stroke: +/- 5 bar
- Main pump: BOSCHREXROTH gear pump, approx. 26 L/min
- Oil volume: approx. 130 liters (HLP 46 MW)
- Ambient temperature: max. 40°C
- Oil temperature: max. 55°C
- Flow temperature: not specified
- Automatic pressure compensation after 5% pressure loss
- Constant pressure holding for up to 3,600 sec

## Electrical System
- Main supply: 400 V AC
- Control voltage: 24 V DC
- Frequency: 50 Hz
- Hydraulic main motor connection: 7.5 kW
- Total connected load without heated plates: approx. 10 kW

Description of the Heating Press:

The Hidrobrasil heating press with a pressing force of 50 tons and a table size of 600x600 mm is specially designed for industrial applications. It is an oil-hydraulic double-column press equipped with a sliding table mounted on spring-loaded rollers. This press is ideally suited for a wide range of pressing processes, delivering precise and reliable performance.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.