Produktionspresse

Hidrobrasil Viersäulenpresse

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2020, gaya penekanan: 400 t, Hydraulic 400-ton Four-Column Press Suitable for continuous multi-shift operation, with the following main features: a) Closing speed: 100 - 450 mm/sec b) Opening speed: 50 - 250 mm/sec (adjustable via touchscreen) c) Pressing speed: 5 - 60 mm/sec (adjustable via touchscreen) d) Piston accumulator with approx. 4 nitrogen cylinders e) Table size (clamping surface): 2700 x 1700 mm (viewed from the front, between the columns) f) Total table size: 3400 x 1700 mm g) 28 mm T-slots as per customer requirements h) Table, ram, and press head stress-relieved annealed i) Column diameter: 250 mm j) Ram size: 3400 x 1700 mm (clamping surface 2700 x 1700 mm) k) Machine overall size approx. 3900 x 2200 (footprint) x 5700 mm (height) l) Oil temperature monitoring (adjustable via touchscreen) m) Automatic lubrication (adjustable via touchscreen) n) Free positioning of the ram (adjustable via touchscreen) o) KEYENCE safety light curtains 14 mm front and rear p) Circulation oil cooling (adjustable via touchscreen) q) Pressure holding valve 0 to 600 sec. (adjustable via touchscreen) r) Table plate size 3400 x 1700 mm, precision milled s) Side doors with monitoring, 1200 mm high, 1000 mm wide t) RITTAL control cabinet, 2200 mm wide, can be positioned up to 20 m from the press u) Pressure settings from 50 tons to 400 tons (adjustable via touchscreen) v) Stroke limit selectable via pressure or position w) Modes: program operation, setup mode, single stroke + continuous stroke (selectable via rotary switch) x) Swivelling operator panel with 15-inch touchscreen monitor y) Two-hand operation on both sides z) Prepared for automatic material feed (SIEMENS S7 1500) aa) Machine body primed and painted bb) Assembly, commissioning and instruction available at extra charge Hydraulics: All press hydraulics are assembled exclusively with BOSCH-REXROTH / Parker / HAWE components. The control cabinet contains only components (SIEMENS) that are readily available in Germany. All safety devices apart from the light curtains are SICK brand. The controller supplied is SIEMENS (S7 1500), including the 15-inch touchscreen panel. The SIEMENS remote maintenance unit SECOME - Ethernet is included in the scope of delivery. SPECIAL FEATURE: Our double-ram design in combination with a piston accumulator allows full performance to be delivered using a single 90 kW main motor. Further technical details (section 1.3): Technical Data Design Press type: Four-column press Thermally neutral: 80 – 120 °C Number of operator sides: 2 Forces Pressing force max.: 4,000 kN Free opening force max.: 600 kN Pressure build-up time, tool closed (steel on steel): max. 2 sec. Dimensions Planned minimum tool height: 600 mm Max. opening: 1,600 mm Stroke and min. opening: 1,000/600 mm Table height above floor: 820 mm Overall height (build height): approx. 5,700 mm Minimum hall height: 7,000 mm Parallelism deviation Giedpfog Iihwex Ah Rep at 20°C: +/- 0.1 mm Deflection Measured at max. closing force, 70% table occupancy: ≤ 0.17 mm/m Weight Total weight of the press without operating fluids: approx. 52 t Speeds (see attached cycle diagram) Rapid closing: 100 – 450 mm/s Pressing speed at max. force ...

Kondisi: bekas, tipe perpindahan gigi: lain, jarak tempuh: 1.001 km, kabin pengemudi: lain,

Kondisi: baru, Tahun pembuatan: 2019, nomor mesin/kendaraan: DF0362, gaya penekanan: 250 t, Pressure: 250 t Clearance width: 1800 mm Stroke: 600 mm Total power requirement: 22 kW Approx. machine weight: 24 t Dimensions L x W x H: approx. 3390 x 3400 x 3800 mm Column diameter: 160 mm Retraction force: 25 t Max. working height: 800 mm Table size: 1800 x 1600 mm Ram size: 2350 x 1600 mm Table height above floor: approx. 900 mm Hydraulic table traverse: 25 mm/sec Max. table load: 5 t Approach speed: 10 mm/sec Pressing phase speed: 10 mm/sec Return speed: 25 mm/sec Rapid traverse speed: 10 mm/sec Oil tank: 600 l Oil cooling (electric): 1.5 kW (max.) Recommended oil: type 46 / 10 µm Monitor SIEMENS: 10 inch Vibration damping pads: The machine is mounted on 4 specially fabricated damping pads, each measuring 450 x 450 x 85 mm. Oil tank with oil cooler: The tank has a capacity of 1500 L. The oil is cooled by a dedicated pump, which activates at 30°C. Oil filtration system: Independent of the main and cooling pump, the press is equipped with a dedicated filtration circuit. The pump operates continuously, but only requires 1.5 kW. Energy-saving function: If the main pump is not required for a preset period, it switches to energy-saving mode, requiring only approx. 2 kWh. Full power is restored immediately when pressure is needed again. Safety technology: Optionally available with SICK or Pilz safety PLCs. The safety light curtains are supplied by the same manufacturer or by the German company SCHMERSAL. Control cabinet: 40% of the control cabinet space remains available for future installations. All components inside the cabinet are supplied by SIEMENS. Bolts: All bolts used on the machine are zinc-plated or yellow galvanized. Oil tray: The hydraulic block and pump are positioned in a small oil catch tray to collect oil during maintenance or hose replacement. Noise emission: The press produces a maximum of 67 decibels according to standards. Accessories: Roller loading bridges: Two loading bridges with rollers, each 1500 mm long, removable, supports with heavy-duty steel rollers. Parallelism monitoring: Both cylinders are monitored via Balluff position measurement systems and SICK draw-wire encoders. Parallelism monitoring is activated at the start of the pressing process. The monitoring accuracy can be set in the control unit. This function is deactivated during idle run. The position on both the left and right exterior of the ram is measured by two SICK draw-wire encoders. The control opens or closes the cylinder oil flow via special high-speed valves. The achievable parallelism accuracy across the full width is less than 1 mm. Gijdpfx Aofxyinoh Rep

Kondisi: baru, Tahun pembuatan: 2018, nomor mesin/kendaraan: DF0116 - Rev.00, gaya penekanan: 110 t, Pressure: 110 t Clear width: 1300 mm Stroke: 1500 mm Approx. machine weight (without operating fluids): 12 t Dimensions L x W x H: approx. 2300 x 2090 x 4200 mm Return force: 11 t Max. working height: 1500 mm Ram plate: 1730 x 1100 mm Table plate: 1730 x 1100 mm Table height above floor approx.: 700 mm Column diameter: 140 mm Ram plate thickness: 100 mm Clamping plate thickness: 100 mm Noise level (max.): 67 dB Machine body colour: RAL 7035 Moving parts colour: RAL 2009 Gedpfx Aedxvfloh Rsip Other components colour: RAL 7021 Cladding and platform colour: RAL 1021 Motor power: 18 kW Max. rapid approach speed: 300 mm/sec Pressing speed: 15 mm/sec Oil tank: 150 l Control system Siemens: S7 1200

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 25.12.15, Fresan FP 100P - C-frame Eccentric Press - 100 Tonnes (1000kN) TECHNICAL DATA: * Capacity: 100 tonnes (1000kN) * Strokes per minute: 60 (adjustable) * Distance between table and slide: 445 mm * Stroke adjustment: 0 - 132 mm * Slide adjustment: 95 mm (motorized) * Table dimensions: 700 x 1000 mm STANDARD SPECIFICATIONS: * Equipment in compliance with CE regulations * Welded steel frame construction * Crankshaft made of alloyed steel AISI 4140 (42CrMo4). Extremely durable and ductile. CNC-ground for minimal surface friction. * High-quality bronze bearings (SnBz-12) Gedpfx Ajnxh T Rsh Rjip * Pneumatic clutch-brake combination * Fully enclosed, helical-geared gearbox in oil bath * Press safety valve * Safety PLC & safety switches & light barriers (Pilz) * 6-point slide guidance with used-oil collector * 7-inch HMI touchscreen control panel * Adjustable stroke rate with AC inverter * Motorized slide adjustment * Mechanical overload protection (hydraulic overload protection can be retrofitted to the standard machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 units) * Automatic central lubrication & used-oil collector (circulating oil / slideway oil) OPTIONAL EQUIPMENT: * Extra clamping plate * Parts ejector (upper and/or lower, mechanical or pneumatic) * Material feeder, loading and unloading systems (decoiler, straightening machine, pneumatic or servo feed unit) * Customized machine

Kondisi: baru, nomor mesin/kendaraan: DF0279, gaya penekanan: 1.000 t, Pressure: 1000 t Clear width: 1500 mm Stroke: 800 mm Total power requirement: 91 kW Machine weight approx.: 68 t Dimensions (L x W x H): 3850 x 2900 x 6000 mm Return force: 100 t Giedjfxyiyopfx Ah Rop Table size: 1500 x 2250 mm Ram size: 1500 x 2250 mm Table height above floor approx.: 1300 mm Advance speed: 200 mm/sec Return speed: 200 mm/sec Pressing speed: 10 mm/sec Oil tank: 1200 l Oil cooling (electric): 1.5 kW (max) Max. working height: 1000 mm Rapid traverse speed: 200 mm/sec WEG monitor: 12 inch

Kondisi: bekas, Tahun pembuatan: 2019, gaya penekanan: 250 t, Pressure: 250 t Passage width: 2500 mm Stroke: 500 mm Total power requirement: 60 kW Approx. machine weight: 39 t Dimensions (L x W x H): 2720 x 3750 x 4350 mm Retracting force: 25 t Max. working height: 800 mm Table size: 3090 x 1500 mm Ram size: 3090 x 1500 mm Table height above floor approx.: 1000 mm Approach speed: 400 mm/sec Pressing speed (at 125 t): 50 mm/sec Return speed: 400 mm/sec Rapid traverse speed: 400 mm/sec Oil tank: 1500 l Oil cooling (electric): 3 kW (max) Vibration damping plates: each 450x450x85 mm Pressure: 250 t at 220 bar t/bar Max. pump capacity: 176 l/min Recommended oil: 46 / 10 μm Hydraulics by Bosch Rexroth or other German manufacturers: Parker, Hydac Control SIEMENS: included Safety light curtains from Schmersal/Pilz: Pilz Monitor: Omron 12 inch Vibration damping plates: The machine rests on four specially manufactured vibration damping plates, each measuring 450x450x85 mm. Oil tank with oil cooling: The tank has a capacity of 1500 L. The oil is cooled by a dedicated pump, which activates at 40°C. Oil filtering system: Independent of the main and cooling pump, the press features a separate filtration circuit. The pump operates continuously, requiring only 1.5 kW. Energy-saving function: Gjdpfod Nq Idjx Ah Rsip If the main pump is not required for a preset period, it enters energy-saving mode, consuming only about 2 kW/h, yet it is immediately fully operational when pressure is needed again. Safety technology: The safety technology is provided by Pilz, with the light curtains from the same manufacturer. Control cabinet: 40% of the control cabinet space is intentionally left free for future installations. All components installed are from Schneider. Bolts: All bolts used on the machine are zinc-plated or yellow-passivated. Oil pan: The hydraulic block and pump are housed in a small oil drip tray, allowing oil to be collected during repairs or hose replacements. Noise emission: According to standards, the press produces a maximum of 75 decibels. Accessories: Roller loading bridges: Two removable loading bridges with rollers, each 1500 mm long, with supports fitted with large, robust heavy-duty rollers. Parallelism monitoring: Both cylinders are monitored for parallelism via Balluff displacement measuring systems and Sick wire-actuated encoders. The parallelism monitoring is activated at the start of the pressing process, and accuracy can be set in the control panel. The function is deactivated during empty runs. The position of the ram is measured on the left and right by two SICK cable-drum encoders. The control system then opens or closes the oil flow to the cylinders via special high-speed valves. The target parallelism accuracy is less than 1 mm across the entire width.

Kondisi: baru, New hydraulic high-speed press from min. 300t up to max. 2500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your requirements. Let us know your needs and we will provide you with an attractive offer including installation and service. ISGEC has delivered to over 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh, and over 200 presses to 40 Japanese customers. We are proud to have been the official sales partner since 2020 and look forward to hearing from you. Godef Rt Iropfx Ah Rjip

Kondisi: baru, gaya penekanan: 100 t, 1 Gedefxyhqepfx Ah Rjip

Kondisi: baru, Tahun pembuatan: 2018, nomor mesin/kendaraan: DF0280, gaya penekanan: 160 t, Pressure: 160 t Clear width: 1000 mm Stroke: 800 mm Total power requirement: 22 kW Machine weight approx.: 13 t Dimensions (L x W x H): 2300 x 2850 x 4000 mm Return force: 16 t Table size: 1430 x 1000 mm Ram size: 1430 x 1000 mm Table height above floor approx.: 850 mm Approach speed: 200 mm/sec Return speed: 200 mm/sec Pressing speed: 15 mm/sec Giodpfxjd Ap Uds Ah Rep Oil tank capacity: 400 l Oil cooling (electric): 1.5 kW (max) Max. working height: 1000 mm Rapid traverse speed: 200 mm/sec Monitor (WEG): 10 inch

Kondisi: baik (bekas), Tahun pembuatan: 2000, tinggi total: 47.000 mm, lebar total: 27.000 mm, panjang total: 25.000 mm, lebar meja: 1.000 mm, panjang meja: 1.800 mm, berat keseluruhan: 43.000 kg, lebar pelat tuas: 600 mm, langkah bantalan cetakan: 200 mm, Siemens Simatic OP 27 control system Sick photoelectric sensor Separate Rittal control cabinet Side walkways Floor-level installation Gsdpstiwgiofx Ah Rsip