Sentifuga dekantir

Hiller GmbH

Kondisi: bekas, System: Inclined Clarifier, Lamella Clarifier, Lamella Separator Condition: Used, up to 120 m³/h depending on medium Design: Robust, high-performance construction Material: Stainless steel on container frame, 30' container, scraper plates in PP (polypropylene) Dimensions (LxWxH): 7580 x 2435 x 3000 mm Weight: approx. 8,000 kg Principle: Wastewater is fed into the inlet of the inclined clarifier and flows downward. Due to the arrangement of the lamella plates in the clarifier, the wastewater is redirected underneath the plates and flows upward through the lamellas. As a result, solids settle down onto the lamella plates. The clarified water is transported to the outlet. Solids on the lamella plates gradually slide down along the plates, where the sludge hopper is located. Ndsdpfxeppyhtj Ab Esd Rake Mechanism: Optionally, we offer the inclined clarifier with a rake mechanism to keep the sludge fluid. Application: Separation of solids and liquids by sedimentation. Inclined clarifiers are often used as a pre-stage before filter presses or decanters for thickening. Pre-thickening of thin sludge allows the filter press to be sized smaller in terms of filter area. The system is in good condition and available for rent or sale. Inspection at our plant is possible by appointment. We also offer new inclined clarifiers with a delivery time of approximately 8 to 10 weeks!

Tahun pembuatan: 2002, Kondisi: bekas, System: Used Decanter / Mobile Centrifuge Ndsdpoppt Sfefx Ab Eed Manufacturer: Hiller Model: Full Jacket Scroll Decanter Centrifuge Type: DP45-422 Decapress Machine No.: 2884 Year of manufacture: 2002 Max. permitted bowl speed: 3800 rpm Bowl inner diameter: approx. 450 mm Bowl material: HII/St52 Electric motor: 30 kW Total weight: approx. 3650 kg Purchase and rental available.

Kondisi: bekas, Tahun pembuatan: 2009, jam operasional: 20.536 h, gaya penekanan: 80 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.400 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat kosong: 16.000 kg, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Njdpfju Thypjx Ab Ejdd Operating hours: 20,536 hours (as of September 2024) Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Feed hopper dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput rates at bulk densities of: – 30 kg/m³: approx. 6.0 t/h – 50 kg/m³: approx. 10.5 t/h – 100 kg/m³: approx. 17.5 t/h Bale weights at a bale length of approx. 1.2 m: up to 600 kg, depending on material PLC control: Siemens S7-300 Display panel: pulsotronic Installed press dimensions: 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight (press): 16 t Special equipment: – Wear-resistant floor made of HARDOX steel – Special press ram for compacting "difficult" materials and loose bulk goods with small grain size – Control cabinet climate control – Machine foot raising by 200 mm Note: The machine is currently in our workshop and undergoing partial refurbishment. We expect the refurbishment to be completed by the end of October, after which the machine will be tested and released for sale.

Kondisi: bekas, Tahun pembuatan: 2009, Decanter System Model: ALDEC G2-80 Year of Manufacture: 2009 Machine No.: 5024392-2009 Rotational Speed: 3650 rpm Ndsdewqc Sdspfx Ab Ejd Bowl Diameter: 80/263 mm Control Cabinet: Rittal 400V-50Hz Additional Equipment: Includes frequency converter and complete documentation Separation Technology: Sludge dewatering via decanter centrifuges (solid-bowl scroll centrifuges, decanters). The high centrifugal forces separate fine solids from the suspension based on different densities.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, Speed: 4500 rpm, max. drum diameter: 300 mm / 167 mm, solids: 2.6 kg/dm³, material temperature min./max.: 5°C / 100°C, bowl dimensions X/Y: 300 mm / 1200 mm, machine material: stainless steel, operating hours: 62,293 h. Spare parts included. An on-site inspection is possible. Ndjdpfx Asu Av H Djb Esd

Kondisi: bekas, Tahun pembuatan: 2024, jam operasional: 270 h,

Kondisi: siap digunakan (bekas), de Nedpfxewnx Ngs Ab Eedd

Kondisi: bekas, Tahun pembuatan: 2001, diameter dalam: 450 mm, ketebalan dinding: 11 mm, berat keseluruhan: 3.200 kg, Decanter / Centrifuge, used Manufacturer: Hiller Nsdovz A Uzspfx Ab Ejdd Model: DP45-422 Machine no.: 2818 Year of manufacture: 2001 Maximum permissible bowl speed: 3,800 rpm Internal bowl diameter: approx. 450 mm Bowl wall thickness: 11.0 mm Bowl material: H2/ST52 Weight: approx. 3,200 kg Permissible density: 1.50 kg/dm³

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, AS-07251-Modul Klarifier Alfa Laval 10 m3/jam Njdpfow Ap I Aex Ab Eodd ALFA-LAVAL PURE SOX (SWPX 810 SGV-34CGL) MODUL KLARIFIER, 316SS. Kapasitas min. 10.000 L/Jam Ditawarkan 4 unit identik Kecepatan mangkuk maksimum 7.200 RPM, kapasitas nominal 10.000 LPH, volume mangkuk 15 L, kapasitas lumpur 9,4 L, cairan dibuang di bawah tekanan, pompa pembuangan padatan dengan tangki siklon, motor 35 KW 460/3/60/1728 RPM, scrubber Pure SOx, terpasang pada dudukan bersama dengan semua katup, pipa, panel kontrol, alat, suku cadang, dan manual Tahun Produksi 2017

Kondisi: bekas, jam operasional: 4.000 h, de Nedpfxowqxhuj Ab Eodd