Spektrometer Hitachi X-MET 8000 Optimum

Hitachi X-MET 8000 Optimum

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, kecepatan spindel (maks.): 8.000 rpm, jumlah sumbu: 9, This 9-axis TRAUB TNL 32 Swiss-type lathe was manufactured in 2014. It features a TX8i-s control system with a 64-bit RISC CNC/PLC processor, a TFT color display, and an electronic handwheel. The main spindle supports a 32 mm bar capacity, and the machine is equipped with a counter spindle featuring a C-axis. It comes with an upper tool turret with dual drive and a lower turret with nine tool holders. Consider the option of purchasing this TRAUB TNL 32 Swiss-type lathe. Contact us for further information. • Control: TRAUB TX8i-s CNC/PLC with 64-bit RISC processor and fiber optic PC; color TFT flat screen; electronic handwheel • Included software/extensions: Polyform (C-axis programming), Helical (3D Y-axis interpolation), Thread cutting without compensating chuck, Cut-off tool breakage monitoring, Cut-off part ejection monitoring, Axis disable, T-ATC • Main spindle: Motor spindle with hollow clamping system; 32 mm bar/bore; C-axis, max. speed 8,000 rpm • Max. stroke: 305 mm (L version) / 127 mm (K version) • Counter spindle: Partial hollow clamping, C-axis; cleaning unit mounted on the lower turret Fpodpex D Drcjfx Alysk • Upper tool turret: X/Y/Z/H/B-axes; 10 tool holders; dual drive • Lower tool turret: X/Y/Z/H-axes; 9 tool holders; combined drive; independent counter spindle operation • Measuring/feedback: Linear glass scales on the X-axis (upper and lower turret); rotary encoders on C-axis • Backworking: 8-position backworking table with combined drive for up to 3 tools; prepared for internal coolant supply • Clamping: Clamping direction reversal mechanism and counter clamping pressure device on main and counter spindle • Coolant system: Standard system with 3-bar and 8-bar pumps (50 Hz) in a 500-liter tank; additional 28-bar pump (50 Hz), 19 l/min flow rate • Extraction: D 150 mm port for central extraction system Additional equipment • None indicated (no robot, bar loader, chip conveyor, or external automation listed)

Kondisi: bekas, Tahun pembuatan: 1987, Technical details: Number of spindles: 8 Spindle bore: 51 mm Item: Multi-spindle automatic lathe Manufacturer: Schütte Model: AF51 Year of manufacture: 1987 Six-spindle automatic lathe 8 main spindles max. nominal bore D=51mm Control: SIEMENS SIMATIC S5 Gripper in position 7 for rear-side machining Thread cutting drive Independent feed in positions 2/3 electronic cam switch Balluff Plain text display Wöhrle Coolant auxiliary pump Magnetic cartridge filter Oil operation Including bar loader IEMCA PRA40/37/F, year 1987 (bundle magazine) Painted in light blue and light grey Tool configuration may differ from images. Please contact us for further information and pictures via mail(at) or Fpjdpfoiay Sfjx Alyok

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, An optical 3D coordinate measuring device from Keyence with a 360° 3D scan function is available. Measurement accuracy: +/-10µm, repeatability: 2µm, resolution: 0.1µm, point density: 16 million, measuring diameter (low magnification): 300mm, measuring diameter low magnification/combined: 200mm/500mm, rotation range: 360°, tilt range: 45°, maximum table load: 50kg. Machine dimensions X/Y/Z: approx. 1000mm/1000mm/1000mm, weight: approx. 65kg. Documentation is available. An on-site inspection is possible. Fjdewx Rcyspfx Alyspk

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 7213, Country of manufacture: Switzerland Net weight: approx. 2,550 kg Customs tariff code: 8458.11 20 Dimensions: 2,000 x 1,260 x 1,950 mm TECHNICAL SPECIFICATIONS 10-axis machine – standard version 10 axes, 6 spindles: Axes and spindle designation - 1 sliding headstock: Z1, S1 - 2 independent vertical tool carriers: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotating spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 Fedpfx Ajw T Tcwjlyspk - 1 independent secondary-operation rotating axis: X4, S5 Bar feed position: right of operator Machine axis height: 1,100 mm Main spindle stroke: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Maximum workpiece length Guide bushing machining: 180 mm Collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bushing: fixed / rotating Collet for guide bushing, type: Meister 605 Number of combined side tools: fixed: 2 x 5 / rotating: 3 + 3 Number of combined front tools: fixed: 4 / rotating: 3 Number of combined rear tools: fixed: 3 + 3 / rotating: 3 + 3 Tool section: 12 x 12 mm Rotary tool holder collet: standard ESX 20 Bar feeder: yes Parts catcher: yes All technical data provided without obligation and subject to errors or omissions.

Kondisi: baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Citizen C16-VII CNC Swiss Type Lathe Year of manufacture: 2004 Control: Mitsubishi Meldas 635 Max. machining diameter: 16mm C-axis: Main and Sub Spindle 5 controlled servo axes: X1/Z1/Y1/X2/Z3 4 driven tools on the vertical tool holder C-axis: Main and sub spindle Including accessories: LNS Express 220 bar feeder, conversion kit for 16mm and 10mm Donaldson Torit extraction system Chip conveyor - Immediately available - Fpjdpfov Rhd Hox Alyjk

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 24.140 h, berat keseluruhan: 10.000 kg, produsen pengendali: FANUC, model controller: 31i-NT-SmartX, jumlah sumbu: 9, This 9-axis Nakamura NTJ100 turning-milling center was manufactured in 2017 and features a bar capacity of up to 65 mm, as well as two spindles with maximum speeds of 4,500 and 5,000 rpm, respectively. It comes equipped with a Samsys bar feeder, an Absolent extraction system, and a wide range of automated features, including through-spindle coolant supply, parts catcher, and automatic tool presetting devices. Seize the opportunity to purchase this Nakamura NTJ100 turn-mill center. Contact us for further information about this machine. • Increased bar capacity: 65 mm left, 51 mm right • Workpiece measurement: Han-Bei probe for automatic workpiece measurement (infrared or radio) for both left and right spindle • Left and right, with automatic swivel and 2x 4 measuring directions for fast, precise tool presetting via NC function • Operating hours: 43,399h • Coolant system: Coolant through spindle (CTS); coolant float switch for machine stop at low level; additional coolant flush through both spindles (left and right) • Bar capacity: Ø 51 mm • Type A parts catcher with collecting tray, max. Ø 65 x 150 mm, 3.0 kg, spindle side, left, with plastic lining Fpedox D Iuzepfx Alyjk • Chuck air blow device for left spindle • Automatic power shut-off • Preparation for oil mist extraction system with connecting stub Ø 150 mm • Robot/automation preparation: Pneumatic flap for robot handling on the top of the door, opening approx. 400 x 400 mm • Handwheel for manual positioning of defined contours • Data server with 1 GB ATA memory card • Interface for KNOLL system • Three-color signal light The Samsys bar loader with 1.5 m loading length has the following dimensions: Length: 225 cm + 43 cm intermediate guide; Width: 120 cm (including loading ramp and control panel); Height: 145 cm or 180 cm with open hatch The machine was mainly used for machining aluminum (95%). Additional equipment: • Samsys bar feeder, including extension • Absolent extraction unit • Hinged belt chip conveyor with interface, interval control, and alarm monitoring

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), - GEBRAUCHT - 6-ACHSEN-SCHIEBEKOPF-DREHMASCHINE MIT STANGENLADER MAX. DREHLÄNGE: 320 mm MAX. DREHDURCHMESSER: 32 mm SPINDEL: 200-8000 U/min; 3,7 - 7,5 kW GEGENSPINDEL: 200-7000 U/min; 1,5 - 2,7 kW X1-ACHS-VERFAHRWEG: 108 mm X2-ACHS-VERFAHRWEG: 228 mm Y1-ACHS-VERFAHRWEG: 275 mm Z1-ACHS-VERFAHRWEG: 325 mm Z2-ACHS-VERFAHRWEG: 130 mm Z3-ACHS-VERFAHRWEG: 410 mm EILGÄNGE X-Y-Z: 20 m/min ANGETRIEBENER REVOLVERKOPF: 8 STELLUNGEN; 200 - 5000 U/min STEUERUNG: CINCOM SYSTEM M6D Fodpfx Alovthv Ieyjpk STANGENLADER: IEMCA Mod. BOSS 332 EVOLUTION GEWICHT: 2.850 kg ZUBEHÖR: TEILEFÄNGER

Kondisi: bekas, 1 Fpodpfx Aowwa Dkelysk

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 9 - Number of turrets: 2 MAIN SPINDLE - Spindle drive power: 6.7 / 10.7 [kW] - Spindle speed: 8,000 [rpm] - Max. bar diameter: 32 [mm] - Travel Z: 305 [mm] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE Fpsdpfxeypxqrj Alyok - Spindle drive power: 3.7 / 5.5 [kW] - Spindle speed: 6,400 [rpm] - Max. bar diameter: 30 [mm] - Minimum C-axis resolution: 0.001 [degrees] - Travel X: 140 [mm] - Travel Z: 300 [mm] TURRET 1 - Number of positions: 10 - Number of live positions: 10 - Live tool speed: 12,000 [rpm] - Live tool power: 3.4 [kW] - Travel X/Z: 140/300 [mm] - Travel Y: -40/+25 [mm] TURRET 2 - Number of positions: 10 - Number of live positions: 10 - Live tool speed: 12,000 [rpm] - Live tool power: 3.4 [kW] - Travel X/Z: 140/320 [mm] - Travel Y: -25/+40 [mm] ELECTRICAL SUPPLY - Total connected load: 28 [kW] WEIGHT AND DIMENSIONS - Footprint: 3,870 x 1,670 [mm] - Machine height: 2,500 [mm] - Machine weight: 6,000 [kg] MACHINE HOURS - Powered hours: 23,240 [h] - Operating hours: 19,500 [h] EQUIPMENT - Control: Traub TX 8i-p - 3-color status lamp - Coolant tank: 500 [l] * with high-pressure pump: 3, 8, 20 [bar] * with paper filter - Chip conveyor - Parts catcher - Parts conveyor belt - Bar feeder interface

Kondisi: bekas, TECHNICAL DATA - Number of axes: 7 MILLING SPINDLE - Tool holder: HSK40 - Spindle speed: 30,000 [rpm] LINEAR AXES Fpjdpfxsuhbtqo Alyjk - Travel X/Y/Z axes: 450 x 270 x 310 [mm] - Rapid traverse speed (X/Y/Z): 75 [m/min] SWIVEL AXIS B - Travel: -20/+115 [degrees] - Minimum resolution: 0.001 [degrees] TOOL CHANGER - Tool changer type: Parapluie - Number of tools in magazine: 20 SWIVEL AXIS A - Max. bar diameter: 32 [mm] - Minimum resolution: 0.001 [degrees] - Travel: 360 [degrees] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive power: 17 [kVA] WEIGHT AND DIMENSIONS - Required floor space: 1,500 x 2,600 [mm] - Machine height: 2,300 [mm] - Machine weight: 5,100 [kg] MACHINE HOURS - Operating hours: 20,749 [hours] ACCESSORIES - Control: Fanuc 31i-A5 - Interfaces: USB, PCMCIA, RJ45 - Fire extinguishing system *: KRAFT&BAUER FB703 * Note: Functionality not guaranteed. To be inspected by a qualified company appointed by the buyer. - Coolant tank - Spindle cooling - Oil mist extraction: HIFI FILTER - Tool measurement probe: Renishaw TS27R - Workpiece measurement probe: Renishaw OMP40 - System for 6th side machining - Collet chuck: ORTLIEB KSF 30-50 - Tool identification via RFID scan: BALLUFF BIS C-650 - Tool holders: 30