NAKAMURA NTJ100
Nakamura-Tome NTJ100

Name: Nakamura-Tome NTJ100
Brand: Nakamura-Tome
Availability: InStock

Tahun pembuatan

2017

Kondisi

Bekas

Lokasi

Swiss

Data mesin

Nama mesin:: NAKAMURA NTJ100

Pabrikan:: Nakamura-Tome

Model:: NTJ100

Tahun pembuatan:: 2017

Kondisi:: siap digunakan (bekas)

Jam operasional:: 24.140 h

Harga & Lokasi

Lokasi:: , Swiss

Hubungi

Rincian teknis

Berat keseluruhan:: 10.000 kg

Produsen pengendali:: FANUC

Model controller:: 31i-NT-SmartX

Jumlah sumbu:: 9

Rincian penawaran

ID iklan:: A20703765

Nomor referensi:: CH-TUR-NAK-2017-00001

Pembaruan:: terakhir pada 29.07.2026

Deskripsi

This 9-axis Nakamura NTJ100 turning-milling center was manufactured in 2017 and features a bar capacity of up to 65 mm, as well as two spindles with maximum speeds of 4,500 and 5,000 rpm, respectively. It comes equipped with a Samsys bar feeder, an Absolent extraction system, and a wide range of automated features, including through-spindle coolant supply, parts catcher, and automatic tool presetting devices. Seize the opportunity to purchase this Nakamura NTJ100 turn-mill center. Contact us for further information about this machine.

• Increased bar capacity: 65 mm left, 51 mm right
• Workpiece measurement: Han-Bei probe for automatic workpiece measurement (infrared or radio) for both left and right spindle
• Left and right, with automatic swivel and 2x 4 measuring directions for fast, precise tool presetting via NC function
• Operating hours: 43,399h
• Coolant system: Coolant through spindle (CTS); coolant float switch for machine stop at low level; additional coolant flush through both spindles (left and right)
• Bar capacity: Ø 51 mm
• Type A parts catcher with collecting tray, max. Ø 65 x 150 mm, 3.0 kg, spindle side, left, with plastic lining
• Chuck air blow device for left spindle
• Automatic power shut-off
• Preparation for oil mist extraction system with connecting stub Ø 150 mm
• Robot/automation preparation: Pneumatic flap for robot handling on the top of the door, opening approx. 400 x 400 mm
• Handwheel for manual positioning of defined contours
• Data server with 1 GB ATA memory card
• Interface for KNOLL system
• Three-color signal light

The Samsys bar loader with 1.5 m loading length has the following dimensions: Length: 225 cm + 43 cm intermediate guide; Width: 120 cm (including loading ramp and control panel); Height: 145 cm or 180 cm with open hatch

The machine was mainly used for machining aluminum (95%).

Additional equipment:
Ksdpfx Acsx D Iuzj Hsna

• Samsys bar feeder, including extension
• Absolent extraction unit
• Hinged belt chip conveyor with interface, interval control, and alarm monitoring

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Penyedia

Terdaftar sejak: 2017

1.352 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+49 631 7... iklan

Iklan-iklan ini juga mungkin menarik bagi Anda.

Iklan kecil

Pusat pembubutan dan milling CNC Nakamura-Tome NTJ-100

Lüneburg

10.985 km

Pusat pembubutan dan milling CNC
Nakamura-TomeNTJ-100

Hubungi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Pengontrol FANUC 31i-B Sumbu C pada kedua spindel Penggerak frais pada revolver atas Penggerak frais pada revolver bawah Rentang pergerakan - Sumbu Y1: 80 (+/- 40) mm Rentang pergerakan - Sumbu Y2: 65 (+/- 32,5) mm Rentang putar sumbu B: +/- 91 ° Kemiringan alas: 90 ° SPINDEL UTAMA Diameter batang yang dapat dilalui: 42 mm Diameter spindel: 51 mm Knsdpfozvx Ayex Ac Hsa Kecepatan putar spindel: 6.000 putaran per menit Daya penggerak - Motor spindel maks./kontinu: 11 / 7,5 kW SPINDEL LAWAN Diameter batang yang dapat dilalui: 42 mm Diameter spindel: 51 mm Kecepatan putar spindel: 6.000 putaran per menit Daya penggerak - Motor spindel maks./kontinu: 11 / 7,5 kW REVOLVER PERKAKAS Jumlah tempat penyimpanan perkakas, revolver atas: 12 / 24 + 6 Jumlah tempat penyimpanan perkakas, revolver bawah: 12 / 24 TERMASUK Sistem penyaringan kemiringan alas Konveyor serpihan rantai engsel, pembuangan di sisi kanan Sistem pendingin Wadah penampung material

Lihat detail

Iklan kecil

Nattheim

11.085 km

Mesin bor lubang pasak
GannomatDB 21

Hubungi

Iklan kecil

Mesin bubut otomatis Pembubutan CNC TORNOS AS14

Ajdovščina

10.857 km

Mesin bubut otomatis Pembubutan CNC
TORNOSAS14

Hubungi

Kondisi: sangat baik (bekas), Tahun pembuatan: 1976, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: AC (pendingin udara), Mesin dalam kondisi kerja yang sangat baik. Mesin ini sangat cepat, dan bagian pengangkatnya telah diperbarui. Dijual karena akan ada rencana pensiun di masa mendatang. Kedpfx Acenyiyaj Hona Mesin-mesin yang tersisa, beserta perlengkapannya, juga akan dijual di masa mendatang. Tiga mesin CNC, dua forklift, dan lain-lain... Tidak semua barang ditampilkan dalam gambar karena ada batasan 15 foto. Hubungi kami untuk melihat foto-foto lainnya.

Lihat detail

Iklan kecil

Jerman

11.248 km

TRAUB TNL 32
TRAUBTNL 32

Hubungi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, kecepatan spindel (maks.): 8.000 rpm, jumlah sumbu: 9, This 9-axis TRAUB TNL 32 Swiss-type lathe was manufactured in 2014. It features a TX8i-s control system with a 64-bit RISC CNC/PLC processor, a TFT color display, and an electronic handwheel. The main spindle supports a 32 mm bar capacity, and the machine is equipped with a counter spindle featuring a C-axis. It comes with an upper tool turret with dual drive and a lower turret with nine tool holders. Consider the option of purchasing this TRAUB TNL 32 Swiss-type lathe. Contact us for further information. Knjdpfx Acex D Drcj Hja • Control: TRAUB TX8i-s CNC/PLC with 64-bit RISC processor and fiber optic PC; color TFT flat screen; electronic handwheel • Included software/extensions: Polyform (C-axis programming), Helical (3D Y-axis interpolation), Thread cutting without compensating chuck, Cut-off tool breakage monitoring, Cut-off part ejection monitoring, Axis disable, T-ATC • Main spindle: Motor spindle with hollow clamping system; 32 mm bar/bore; C-axis, max. speed 8,000 rpm • Max. stroke: 305 mm (L version) / 127 mm (K version) • Counter spindle: Partial hollow clamping, C-axis; cleaning unit mounted on the lower turret • Upper tool turret: X/Y/Z/H/B-axes; 10 tool holders; dual drive • Lower tool turret: X/Y/Z/H-axes; 9 tool holders; combined drive; independent counter spindle operation • Measuring/feedback: Linear glass scales on the X-axis (upper and lower turret); rotary encoders on C-axis • Backworking: 8-position backworking table with combined drive for up to 3 tools; prepared for internal coolant supply • Clamping: Clamping direction reversal mechanism and counter clamping pressure device on main and counter spindle • Coolant system: Standard system with 3-bar and 8-bar pumps (50 Hz) in a 500-liter tank; additional 28-bar pump (50 Hz), 19 l/min flow rate • Extraction: D 150 mm port for central extraction system Additional equipment • None indicated (no robot, bar loader, chip conveyor, or external automation listed)

Lihat detail

Iklan kecil

Furtwangen im Schwarzwald

11.247 km

Mesin bubut tipe Swiss
CitizenM32

Hubungi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Citizen M32-2M3 CNC Mesin Bubut Panjang Tahun Pembuatan: 2002 Kontrol: Mitsubishi Meldas 635 Diameter Maks. Pemesinan: 32mm 7 Sumbu Servo yang Dapat Dikontrol: X1/Z1/Y1/X2/Z2/X3/Z3 4 Alat Penggerak pada Dudukan Vertikal Poros-C: Spindle utama dan spindle sub Termasuk aksesoris: FMB Turbo 5-42 Feeding Magazine Sistem Ekstraksi Knodjx Dncfepfx Ac Hsa Konveyor Bagian 5 Alat Penggerak untuk Revolver 5 Dudukan Standar (Dudukan Bubut/Bor) untuk Revolver - Tersedia Segera -

Lihat detail

Iklan kecil

Mesin penggiling silinder Karstens Generalüberholt K19 CNC 1000

Heroldstatt

11.131 km

Mesin penggiling silinder
Karstens GeneralüberholtK19 CNC 1000

Hubungi

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Centre Height: 181 mm Centre Distance: 1000 mm Max. Grindable Workpiece Diameter: 360 mm Max. Load (Cantilevered): 1000 N (100 kg) Max. Load (Between Centres): 3000 N (300 kg) Z-Axis Table Swivel Adjustment: 10° Table Drive (hydraulic): 0–4 m/min X-Axis Ksdpetqf Rzjfx Ac Hjna Travel of Infeed Spindle: 80 mm Rapid Traverse (hydraulic): 50 mm Coarse Adjustment (Air Cushion): 280 mm Feed Drive via DC Motor Rapid Feedrate: 48 mm/min/Ø Feed Cycle: Plunge / Longitudinal Grinding 4 Pre-selectable Feedrates mm/min/Ø: 0.01–48 4 Pre-selectable Feed Amounts mm: 0.001–0.1 Spark-out Cycle in Traverse Grinding s: 0–99 / 0–99 strokes Creep Feed (Jog Infeed) mm/Ø: 0.001 Grinding Spindle Head Universal, Swiveling: 0–180° Grinding Wheel (External): D x W x Bore: 500 x 100 x 127 or 203.2 mm Grinding Wheel (Face, Option): D: 250 x 32 x 76.2 mm Grinding Wheel (Internal, Option): D: (2–250) mm Drive Power (External/Face): 5.5 (7.5) kW Drive Power Internal: 2.2 kW Peripheral Speed (External): 35 (50) m/s Grinding Wheel Wear (External): 160 mm/Ø Guard Width: 100 mm Grinding Spindle Diameter: 60 mm Internal Spindle Mount: 80 (100) mm Workpiece Spindle Head: Infinitely Variable Drive: Mk 4, 1/min: 30–270 / 50–450 Workpiece Spindle: Lockable Spindle Taper: MK 4/24 mm Spindle Nose for Flange: MK 4 mm cylindrical Ø63H6 x 6 Workpiece Headstock Swivels on Turning Part: 0–90° Tailstock: Quill Taper/Quill Diameter: MK 4/750 mm Quill Stroke: 45 mm Quill Force: 100–800 N / 250–1400 N adjustable Quill Actuation: Manual (foot switch) Quill Fine Adjustment: ±40 µm Electrical Connections: Total Machine Connected Load: 6.5–10 kW Grinding Spindle Head: 5.5 (7.5) kW Workpiece Spindle Head: 0.55 (1.1) kW Coolant Filtration: 0.75–2.2 kW Guideway Lubrication Pump: 0.1 kW Hydraulic Pump: 1.5 kW Hydraulic Tank: 80 litres Pneumatics: 6 bar Comparable with Weiss/ EMAG/ GP cylindrical grinding machines/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat.

Lihat detail

Iklan kecil

Jerman

11.253 km

Mesin batang multi-spindel
SCHÜTTEAF51

Hubungi

Kondisi: bekas, Tahun pembuatan: 1987, Technical details: Number of spindles: 8 Spindle bore: 51 mm Item: Multi-spindle automatic lathe Manufacturer: Schütte Model: AF51 Year of manufacture: 1987 Six-spindle automatic lathe 8 main spindles max. nominal bore D=51mm Control: SIEMENS SIMATIC S5 Gripper in position 7 for rear-side machining Thread cutting drive Knedpfxoiay Sfe Ac Hoa Independent feed in positions 2/3 electronic cam switch Balluff Plain text display Wöhrle Coolant auxiliary pump Magnetic cartridge filter Oil operation Including bar loader IEMCA PRA40/37/F, year 1987 (bundle magazine) Painted in light blue and light grey Tool configuration may differ from images. Please contact us for further information and pictures via mail(at) or

Lihat detail

Iklan kecil

MORI SEIKI NL2000SY/500 MORI SEIKI NL2000SY/500

Italia

11.248 km

MORI SEIKI NL2000SY/500
MORI SEIKINL2000SY/500

Hubungi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, kecepatan spindel (maks.): 6.000 rpm, jarak pergerakan sumbu X: 260 mm, jarak gerak sumbu Z: 590 mm, jumlah sumbu: 6, Mesin MORI SEIKI NL2000SY/500 dengan 6 sumbu ini diproduksi pada tahun 2005 dan memiliki jarak gerakan sumbu X sebesar 260 mm, jarak gerakan sumbu Z sebesar 590 mm, daya spindel sebesar 5,5 kW, dan kecepatan spindel sebesar 6.000 RPM. Mesin ini dilengkapi dengan turret perkakas dengan 12 posisi. Jika Anda mencari mesin bubut berkualitas tinggi, Anda dapat mempertimbangkan mesin MORI SEIKI NL2000SY/500 yang kami tawarkan untuk dijual. Kjdpfx Ajx D R Ausc Hsna • Turret perkakas: 12 posisi

Lihat detail

Iklan kecil

Europa

10.649 km

Pers pengosongan halus
FEINTOOLHFA 320

Hubungi

Kondisi: sangat baik (bekas), Tahun pembuatan: 1987, Pressing force: 320 t Sheet thickness: 0 mm Strokes per minute: 80 spm Total pressing force: 320 t Stroke: 30 - 80 mm Clamping area (lower table): 630 x 740 mm Clamping area (upper table): 630 x 630 mm Total power requirement: 60 kW This fineblanking press FEINTOOL HFA 320 was completely overhauled in 2019 and is in as-new condition with new CE marking. MAIN RAM Total force (nominal): 320 t Minimum stroke: 30 mm Stroke: 80 mm V-RING Nominal force: 160 t Stroke: 30 mm Knodpfxevwgl Ne Ac Hsa COUNTER RAM Nominal force: 80 t Stroke: 30 mm TOOL DIMENSIONS Lower table - width: 630 mm Lower table - depth: 740 mm Upper table - width: 630 mm Upper table - depth: 630 mm Max. daylight: 320 mm ELECTRICAL SPECIFICATIONS Total power consumption: 60 kW

Lihat detail

Iklan kecil

Tanpa pusat - Mesin gerinda silinder - Eksternal ESTARTA 312

Jerman

10.886 km

Tanpa pusat - Mesin gerinda silinder - Eksternal
ESTARTA312

Hubungi

Kondisi: bekas, Tahun pembuatan: 1996, Technical Details: Grinding diameter: 1.5 - 75 mm Grinding wheel diameter: 400 mm Grinding wheel width: 160 mm Working stroke: 0 - 1 mm Feed rate: stepless/continuous mm/min Grinding wheel speed: 1300 rpm Control unit: Num 1020 GC Total power requirement: 14 kW Machine weight approx.: 3.8 t Machine dimensions: 3.0x2.2x2.2 m Control cabinet dimensions (LxWxH): 1.5x0.4x2.0 m CENTERLESS EXTERNAL CYLINDRICAL GRINDING MACHINE for alloyed round steels, plunge-cut and through-feed grinding processes - In plunge-cut mode the maximum plunge length is 160 mm. - Workpiece discharge is automatic via rail (the function and operation of which is not known to WMW AG) - Main grinding wheel with dressing device, speed = 1300 rpm. - Regulating wheel with dressing device, entry angle right 0-6° and left 0-2°; wheel size 280x160mm - automatic grinding wheel balancing system Condition: Knjdpju Ngyzofx Ac Hja Reference run not possible The machine does not operate in automatic mode Accessories: Various grinding and regulating wheels available on request

Lihat detail

Beriklan di sini