Pusat pemesinan 5-sumbu HOLZ-HER ProMaster 7125 -bekas-

Holz-Her ProMaster 7125 315

Kondisi: bekas, Holz-Her Accura 1556 Premium Lhodpfx Acjxnmu Ie Aop Heavy-duty version with full equipment Edge thickness: 0.4 – 20 mm 18.5" touchscreen control in 16:9 format, rotatable and tiltable Synchronized belt bridge with motorized, position-controlled height adjustment Long, motorized adjustable infeed fence Pre-milling unit for pre-processing before the gluing station with 2 NC servo axes Syncro edge magazine, fully automatic for rolls and strips, MOT3, with 2 motorized hold-down devices GLU-JET automatic glue application station. Cartridge + PUR bonding. Thin-film technology Glue height adjustment / touch nozzle Max. edge height: 60 mm Pressure unit with 4 rollers, motor-pneumatic. NC servo axis End trimming unit for coiled and strip material up to 20 mm edge thickness, with electro-pneumatic adjustment for 0-10° tilt of the trim saws Flush milling unit 20 mm MOT3, motorized horizontal adjustment Multi-function milling unit MOT6 with multifunctional milling technology Flush milling 8 mm Radius milling R1,3; R2 (2x) Chamfer milling up to 45° Copy milling unit MOT4, with automatic tool changer MOT2 and oscillating probe, corner copying, postforming corners, with 4 NC control axes, for milling upper and lower longitudinal edges and copy milling the front and rear end vertical edges. Working height 60mm. R1,3; R2 (2x); Chamfer 45° Scraper unit MOT8 incl. high-gloss package and fully automatic tool changer, R1; R1,3; R2 (2x); Chamfer 45° Nesting package Flat scraper unit with pre- and post-tracing Application-controlled oscillating buffing unit for post-cleaning and edge polishing with 2 textile discs Spraying devices in the infeed and outfeed areas, as well as antistatic agent at the pressure unit Electronically controlled separating agent spraying device in the infeed area Electronically controlled antistatic spraying device at the pressure unit Electronically controlled cleaning agent spraying device with cleaning liquid in the outfeed area Automatic chain lubrication Barcode scanner Machine is FACTORY-SERVICED, in TOP CONDITION Year of manufacture: 2021 / Leasing options available Machine is connected in the showroom and ready for demonstration Available ex stock Lieboch

Kondisi: sangat baik (bekas), Single-sided edge banding machine (LEFT) Edge thickness, rolls (min/max) mm: 0.3 - 3 Edge thickness, solid strips (min/max) mm: 3 - 12 Panel thickness (min/max) mm: 8 - 60 Control: ICOS open TS Feed speed m/min (adjustable): 4 - 20 Top pressure: V-belt driven Spraying unit (for liquid anti-adhesive) Jointing milling unit 08.376 (2 x 3 kW) Gluing station (hot melt adhesive) 283.1513 Edge pressure zone Edging magazine for rolls (number of compartments): 1 End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Ljdpfed Nuu Hsx Ac Ajhp Multifunctional unit (radius milling and profile milling) 08.342 (2 x 0.66 kW) servo Profile scraper unit 08.519 Flat scraper unit 08.50 Buffing unit 08.612 (2 x 0.25 kW)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, jam operasional: 278 h, Max. workpiece size for edge milling X = 3620 mm; Maximum travel paths: X = 3865 mm Minimum room height 3.20 m Processing in Y and Z Y = 1600 mm; max. panel width 2000 mm Maximum workpiece height 300 mm Measured from upper edge of vacuum cup 125 mm MACHINE OPERATION SOFTWARE CAMPUS V7 Plus CAD/CAM software 1 x license incl. CabinetControl Base and material removal simulation 1 pc. software license secured via license dongle for the machine CabinetControl Base Software for furniture planning and production CAMPUS V7 PLUS, software for CNC machining centers ADDITIONAL MODULE HIGH-SPEED MILLING Control Siemens industrial PC control Handheld device for remote machine operation MILLING HEAD 5-axis head 7840, power: 12 kW n(max.) = 0 - 24000 rpm, steplessly adjustable Cardanic; C-axis rotatable +/- 360°, A-axis rotatable +/- 180° Liquid cooling (cooling unit included) with HSK-F 63 tool holder Tool weight max. 6 kg Milling tools: max. Ø 200 mm Saw blades: max. Ø 350 mm with optional 7886 pick-up changer DRILLING UNIT Pressure booster for increasing standard pressure from 6 to 8 bar Drilling unit 7881, 24 spindles Drive power 3.0 kW, incl. sawing unit 18 vertical spindles individually selectable L-shaped arrangement, 11+2 in X-, 6 in Y-direction, 32 mm pitch n (max.) 1000 - 5710 rpm, steplessly adjustable 6 horizontal spindles 2 double drilling units in X-direction 1 double drilling unit in Y-direction includes sawing unit Integrated sawing unit for sawing/grooving in X-direction n(max.) 1000 - 7330 rpm, steplessly adjustable MACHINE TABLE Machine table, 6 consoles, pneumatically clamped, movable in X-direction Display and definition of consoles and suction cups in the program 2 lateral stops at field A and D, 2 large push buttons for clamping and releasing workpieces, 2 measuring tape displays for positioning the consoles in X in relation to stop field A/D, measuring tape displays for suction cups at each console in Y, relative to rear stop STOPS 2 additional processing fields front for 6 consoles (4-field processing) 4 pneumatically controlled stops per field, one per console and one additional lateral stop in X-direction LOADING AIDS 4 pneumatically raised and lowered loading aids for easy handling of heavy parts TOOL CHANGER Tool changer 7996, 18-position magazine (carousel) travelling automatically in X-direction Travelling tool changer 7886, single saw blade magazine Specially for large saw blade diameters up to 350 mm Pick-up system mounted on the gantry, pneumatic Max. Ø tool: Ø 350 mm Lodpfx Acoxfaf Uj Ashp Tool changer 7892, 16-position linear pick-up VACUUM PUMP 140 m³/h dry-running LED light for the work area. SAFETY OPTIONS Safety enclosure according to CE-standards Protective fence on the sides and rear EQUIPMENT VARIANTS AND ACCESSORIES LUBRICATION Automatic central lubrication Gantry extension - ideal for 4-field processing and for large workpieces. 2 controlled pneumatic modules for max. 5 frame clamping elements each per field A/D Each module can control max. 5 frame clamping elements simultaneously. Simultaneous opening/closing of the connected frame clamping elements, incl. foot pedal for actuation; max. 2 pcs. each for fields A and D can be ordered. OPTIONAL: LASER - Laser pointer Consisting of two laser pointers for positioning the vacuum cups

Kondisi: bekas, nomor mesin/kendaraan: 008018, Tipe tepi yang dipasang: tepi tipis, tepi tebal, kayu solid Sistem lem: EVA, PUR Penghalusan sambungan: ya Agregat multifungsi: ya Kecepatan maju maksimum: 20 m/menit Ketebalan papan maksimum: 60 mm Ljdpfx Aewv Dfcsc Aohp Unit kerja: 7 unit

Kondisi: bekas, Tahun pembuatan: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on configuration) Edge height: 51/66 mm (depending on configuration) Panel thickness: 6–45/60 mm (depending on configuration) Edge types: roll and strip material Lsdpfx Ajvvkfdsc Ajhp Feed speeds: infinitely variable feed from 12–30 m/min (depending on configuration) with adjustable infeed level in the magazine area (max. adjustment range 30 mm) with height-adjustable magazine plate for varying the lower edge overhang with large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm with transport chain including automatic central lubrication with motorized, position-controlled bridge height adjustment with pneumatic locking roller for minimal workpiece spacing with extendable workpiece support (extension 1600 mm) with space-saving, pneumatically controlled sliding covers along the entire machine (variations possible for individual units) with motorized infeed fence with spray oilers for lubrication of all joints and bolts (incl. operating hours counter) with central extraction connection (2x Ø 200 mm) with integrated chip collection box at the end of the machine (with radius scraper unit installed) Controller PPC 231 - Power PC for efficient setup and changeover - 15" SVGA display with touchscreen - CF memory card 128 MB - USB port on board - Ethernet network connection - Keyboard port on board - Windows-like user interface - all information in plain text and/or graphics - swivel and pivoting control panel at eye level - dustproof membrane keyboard with softkeys (pushbuttons) - LED indicator for unit preselection - program list with program names and numbers - extensive program storage - individual selection of units with functions for basic settings of setpoint values, reference points, and tool corrections as well as fixed reference points - setup operations for units and their axis settings centrally and clearly organized via fine adjustment (depending on configuration) - interval display for minimum workpiece distance - integrated reference control - reference points are controlled in general or program-specific mode - clear and comprehensive acquisition of all operating data - service messages in plain text - diagnostics system - includes integrated synchronous bus system for high accuracy in unit control - individual management for up to ten users, including password protection - online maintenance (optional), data exchange with HOLZ-HER Service - barcode interface (optional) BASE MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the base machine Spray unit 1856 for infeed and outfeed area For the infeed area: Electronically controlled release agent spray unit with release agent Riepe-LPZ/II For the outfeed area: Electronically controlled cleaning agent spray unit with cleaning agent Riepe-LP163/93 (only in combination with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12,000 rpm) With two plunge-controlled milling units • 1 unit in counter-rotation • 1 unit in co-rotation Plunge depth 5 mm with static frequency converter 200 Hz, without milling tool with ProLock quick-release tool holder for rapid tool change Tool for 1803 (workpiece height up to 60 mm) Diamond cutter PRO UT 2 pcs (front and rear) incl. safety hoods Ø 100-63 – Ø 30 mm, Z = 3 + 3 + 3, 1x left rotation, 1x right rotation Low-noise cutter with integrated chip guidance DFC technology (Leitz system) Chip removal max.

Kondisi: baik (bekas), Tahun pembuatan: 2007, deu-TECHNISCHE_DATEN-Max_bearbeitbare_Laenge_3200_mm_Min_bearbei tbare_Laenge_200_mm_Max_Breite_200_mm_Min_Breite_40_mm_Max_Werkst ueckhoehe_130_mm_Tiefe_bei_max_Tenonierstift_Durchmesser_320_mm_1 05_mm_Tenonierwagen_Geschwindigkeit_min_max_0_100_m_min_Profilier geschwindigkeit_min_max_3_15_m_min__TENONIEREN_1_Stirnschnittsaeg e_5_5_PS_4_kW_Saegeblatt_D_400_mm_2_Tenonierfraeser_Gegenlager_50 _x_620_mm_15_PS_11_3_kW_Max_Werkzeugdurchmesser_320_mm_Achshub_57 5_mm_Automatischer_Ausrei_sschutz_3_Tenonierfraeser_Gegenlager_50 _x_620_mm_15_PS_11_3_kW_Max_Werkzeugdurchmesser_320_mm_Achshub_57 5_mm_Automatischer_Ausrei_sschutz_Vertikale_Positionierung_mit_du rchgehender_Achse_4_Digitale_Winkelverstellungsspannvorrichtung_P ROFILIEREN_5_Profilierfraeser_rechts_Schaft_50_x_320_mm_10_PS_7_5 _kW_Werkzeugdurchmesser_130_240_mm_Achshub_280_mm_Zeitversetzter_ Anti_Ausbraakschutz_bei_Kalibrierung_Doppelte_Drehrichtung_Vertik ale_und_horizontale_Positionierung_mit_durchgehender_Achse_6_Prof ilierfraeser_rechts_Schaft_50_x_320_mm_10_PS_7_5_kW_Werkzeugdurch messer_130_240_mm_Achshub_280_mm_Vertikale_und_horizontale_Positi onierung_mit_durchgehender_Achse_7_Profilierfraeser_rechts_Schaft _50_x_320_mm_10_PS_7_5_kW_Werkzeugdurchmesser_130_240_mm_Vertikal e_und_horizontale_Positionierung_mit_durchgehender_Achse_8_Restte ilrueckgewinnungsgruppe_Vertikale_und_horizontale_Positionierung_ mit_durchgehender_Achse_Vorrichtung_zum_Fluegelauszug_Hfutwt78Z_9 _Untere_horizontale_Nutwelle_Vertikale_und_horizontale_Positionie rung_mit_durchgehender_Achse_88_5_PS_66_4_kW_10_Digitale_Fuehrung _11_Ruecklauf_der_Werkstuecke_zum_Bediener Ljdpfx Aot R T Hcsc Ajhp

Kondisi: perlu perbaikan (bekas), HOT PLATEN HYDRAULIC PRESS, MODEL LS/L/R 30/13, PLATEN THICKNESS 150 mm Configuration - LOADER - HOT PLATEN HYDRAULIC PRESS, MODEL LS/L/R 30/13, PLATEN THICKNESS 150 mm - IDLER ROLLER UNLOADER, 3000x1300 mm Platen dimensions: 3000x1300 mm Pressing cylinders: 6 units, Ø 70 mm, stroke 200 mm Lsdpfx Asn R Dihoc Ajhp Pressing force: 70 tons

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, HOLZ-HER Sprint 1329 Lodpfjxducrex Ac Ajhp - Mesin edge banding bekas dalam kondisi baik. - Tahun pembuatan: 2015 - Termasuk konveyor balik BARBARIC (tahun 2017) - Tersedia mulai akhir November/awal Desember 2025 Silakan hubungi kami jika ada pertanyaan.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, panjang pemotongan (maks.): 3.000 mm, lebar potong di pagar rip: 1.000 mm, diameter mata gergaji: 450 mm, panjang meja: 840 mm, daya: 5 kW (6,80 hp), Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Mesin bekas GM010.0348 Tahun pembuatan: 2020 F45 ElmoDrive Tinggi mesin 910 mm Pengoperasian pada tinggi mata Lhjdpfxow Intye Ac Aep Penahan dokumen, langsung di panel kontrol Kemiringan dua sisi (+/- 46°) Diameter maksimum mata pisau 450 mm Motor 5,0 kW (6,8 HP) VARIO Siap untuk scoring dua sumbu Perpanjangan meja 840 mm Gerobak rol ganda dengan panjang 3000 mm Saklar On/Off di gerobak rol ganda PQS Tengah Pagar paralel DIGIT X 1000 mm Rol penyangga depan

Kondisi: bekas, Tahun pembuatan: 2022, Used machine Year of manufacture: 2022 Condition: as new Comes with 6 months full warranty! Only 70 operating hours; machine has not yet been used in production! Equipment and Technical Specifications: BASIC MACHINE Holz-Her Machining Center DYNESTIC 7535 10.5 Lift Processing length: 3100 mm Machine frame of welded construction with ground and hardened prism guides for the gantry, aggregates head, and consoles Gantry design of the traveling stand Rack and pinion drive, helical gearing, in X and Y axes, 1 ball screw drive in Z axis for precise positioning MATRIX Table Fixed, continuous processing table with grid partitioning, continuous grooves in X and Y direction, groove spacing 50 mm with 25 meter sealing cord for clamping the sacrificial plate 1 machining field with stop rails / stop Lsdpjwxz Uysfx Ac Aehp Height 30 mm, pneumatically lowerable. 2 stop rails each in Y direction and 1 stop in X direction on the right (when viewing from the front of the machine) Remote maintenance Integrated network card for transferring control and program data. Data transfer via high-speed internet connection Requirement: high-speed internet connection at the machine USB Interface for data backup or direct import of machining programs at the control panel TECHNICAL DATA Machining dimensions 7535 10.5: Max. nesting table workpiece size: X = 3100 mm Y = 1560 mm Max. travel paths: X = 4695 mm Y = 2305 mm Z = 565 mm Max. machining height 7535/7735 Classic without pusher: Z = 300 mm from table top (without sacrificial plate) Max. pusher clearance height above table for Push/Auto/Lift versions: Z = 250 mm from table top (without sacrificial plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min MACHINE CONTROL SOFTWARE CAMPUS V7 PLUS CAD/CAM software 1 x license incl. material removal simulation BetterSim 1 software license secured with dongle for the machine CAMPUS V7 PLUS, software for CNC machining centers: Includes: 1. CAMPUS NC-HOPS 2. CAMPUS aCADemy 3. CAMPUS MT-Manager 4. CAMPUS Workcenter V7 PLUS 5. CAMPUS 3D material removal simulation BetterSim CAMPUS NC-HOPS Graphical variant system with WOP and CAD/CAM features for creating part variants using macro technology Hi-Speed USB-Device Network Server Allows use of the CAMPUS single license on the machine or a PC in the same network Only one license can be used in the network at a time! Additionally: CAMPUS V7 PLUS CAD/CAM software 1 x license incl. material removal simulation BetterSim 1 software license secured with dongle for office or machine CAMPUS V7 PLUS, software for CNC machining centers: Includes: 1. CAMPUS NC-HOPS 2. CAMPUS aCADemy 3. CAMPUS MT-Manager 4. CAMPUS Workcenter V7 PLUS 5. CAMPUS 3D material removal simulation BetterSim CAMPUS NC-HOPS Graphical variant system with WO