Gabungan permukaan planer dan pengental

Holzkraft SCM FS 41 Classic Tersa

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, For wood chips and wood dust. Designed for commercial applications. All clean air extraction units in this series are H3 dust-tested, with a residual dust content of less than 0.1 mg/m³. High extraction performance with minimal space requirements Maximum performance in this class Very quiet operation Application area: Clean air extraction units for wood chips and wood dust Designed for commercial use Suitable for all woodworking machines with the corresponding extraction port diameter Can also be used for multiple dust sources High-quality, well-designed construction Robust and compact housing made of galvanized sheet steel Extraction port can be easily converted from left to right, offering flexible use Large maintenance openings Large-capacity, mobile chip containers with clamping bracket and chip collection bag System is delivered completely assembled – ready for immediate use Mobile unit Filter description: Ultra-compact design with maximum filter surface area Filter material made from polyester fleece, aluminized, washable, providing a long service life Filter supplied as standard in antistatic design, BIA category M-tested and approved Filter resistance monitoring via differential pressure gauge, adjustable with warning light on the control panel The fan is installed downstream of the filter Standard features: Innovative locking device for secure container positioning All units of this series H3 dust-tested, residual dust content less than 0.1 mg/m³ Scope of delivery: Metal impeller Maintenance opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter 2 fixed and 2 swivel castors with locking brake Preconfigured for machine monitoring connection (up to 8 machines) and slide valve controls Manual filter cleaning Optional sound pressure silencer available Model: RLA 125 M Item No.: 5131256 Technical Data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal air flow rate: 1095 m³/h Max. air flow rate: [not specified] Negative pressure at nominal flow: [not specified] Filter surface area: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from bottom edge of extraction port to floor: 850 mm Weight: 194 kg Kwedpfx Acocnw U Ds Heu Location: Arriving in stock at 54634 Bitburg

Kondisi: bekas, 04493 Combined Machine Steko 228 P.B.S. Pressing - Sanding - Sawing Used - Pneumatic veneer press with electric heating Aluminum heating plates 2280 x 1000 mm (L x W) Lower plate extendable Opening width approx. 145 mm Total pressing force 40 tons, maximum specific pressing pressure 2 kg/cm² Heating: 2 x 1.8 kW - Wide-belt sanding machine 3 kW Table 2600 x 750 mm (L x W), extendable Sanding height 200 mm Belt length 6800 mm Belt width 120 - 150 mm Left/right run, speed 19 m/s - Panel saw / veneer saw / trimming saw 2.2 kW With pneumatic pressure beam Cutting length approx. 2600 mm, cutting height adjustable 0 - 60 mm Max. saw blade diameter 250 mm With chain feed - Dust extraction for sander and saw 0.55 kW Extraction capacity approx. 11 m³/min Push-button control panel with main switch and emergency stop switches Machine mounted on chassis Footprint according to manufacturer: 7.5 m² Transport dimensions approx. 3900 x 2100 x 1400 mm (L x W x H) Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment. Sale in as-is condition Kodpfjxl Ha Sox Ac Hswu Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee. Subject to prior sale No warranty is given on used machines; the following applies: "sold as seen" Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex stock

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1974, nomor mesin/kendaraan: 74-4-10, Fungsionalitas: berfungsi sepenuhnya, ALTENDORF F90 panel saw, year of manufacture 1974 Machine no.: 74-4-10 Manufacturer: Altendorf, Germany Saw length: 2600 mm Cutting width: 1,300 mm Max. cutting height: 130 mm Max. saw blade diameter: 400 mm Main motor: 5.5 kW With scoring unit 4 speed settings Saw blade height adjustment: manual Approximate weight: 780 kg Kodpfxsipvrbj Ac Hewu Technical data subject to change

Kondisi: sangat baik (bekas), Technical data: Max. planing width: 400 mm Max. planing height: 240 mm Kwodpfx Acsv Rv Dbj Hju Cutter shaft diameter: 120 mm Number of knives: 4 Feed speed: 6–12 m/min Manual lifting Extraction port: 110 mm Power supply: 400 V Motor power: 10 kW Overall dimensions: Length: 2200 mm Width: 860 mm Height: 1250 mm

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, * New machine Kedpfxew Hxtie Ac Hjwu * Kubota engine, 18.2 kW * Operating weight: 2,100 kg * Lifting capacity: 2,260 kg * Tires: 27x10.50-15 SKID (machine width 116 cm) * 1st auxiliary hydraulic circuit (double-acting) proportional on joystick incl. continuous operation * ROPS cab incl. heating, 2 mirrors, 2x halogen work lights front & rear, radio – mechanically suspended, adjustable comfort seat with seatbelt & armrest * StVZO road package up to 20 km/h * Road lighting (halogen) * Extended fenders * Rear counterweight plate (90 kg) incl. towing coupling * Standard bucket 1,200mm wide and pallet forks 1,000mm

Kondisi: baru, Tahun pembuatan: 2026, Combined Saw-Spindle Moulder minimax st 3c F 16 Tilting saw blade, tilting spindle moulder and anodized aluminium sliding table Rigid steel/cast iron construction Large support surface and precision cast iron table High-precision sliding table made of anodized aluminium (travel distance 2250 mm) Kwjdehp Rdlopfx Ac Hou Large crosscut frame (900 x 600 mm) with up to 2660 mm extendable aluminium telescopic fence with professional flip stops Max. saw blade diameter 315 mm with scoring unit, tiltable from 90° to 45° Rip fence with fine adjustment Robust saw unit and large, double trunnion spindle moulder unit ensure maximum stability, precision, smooth operation, and long service life Solid and precise machine table made from stress-relieved cast iron Three spindle speeds, manually adjustable from 3500 to 10000 rpm Spindle moulder with reversible rotation Standard arching cutter guard Safety reversing fence jaws made of aluminium Two motors with high performance reserves Two plug-in handwheels for convenient and quick operation Dimensions and weights Weight approx.: 470 kg Extraction connection Extraction port diameter: 2 x 120 mm Extraction port diameter saw blade guard: 60 mm Electrical data Drive motor power: 2 x 5.0 kW Connection voltage: 400 V Mains frequency: 50 Hz Spindle moulder Spindle tilt: 0 – -45 ° Useful spindle length: 100 mm Spindle speeds: 3500/7000/10000 rpm Max. cutter diameter not retractable: 210 mm retractable: 180 mm Tenoning: 275 mm Circular saw unit Crosscut length: 1600 mm Cutting width with rip fence: 900 mm Max. crosscut width left of saw blade: 2660 mm Saw blade tilt: 90 45 ° Max. cutting height at 90°: 90 mm Max. cutting height at 45°: 63 mm Max. saw blade projection at 90°: 100 mm Max. saw blade projection at 45°: 78 mm (Main) saw blade diameter: 315 mm Remark (main) saw blade diameter: independent of scoring blade (Main) saw blade speed: 4000 rpm Sliding table and table Table length: 1112 mm Table width: 430 mm Scope of delivery: Arching cutter guard Anodized aluminium format sliding table Aluminium fence jaws Flip stops Location: Ex stock 54634 Bitburg - Available immediately -

Kondisi: baru, Tahun pembuatan: 2026, Putz P4 cement plastering machine Designed for site-mixed mortars (cement, sand, lime) Pump motor: 5.5 kW Mixer motor: 2.2 kW, 55 rpm Kwodpstuiqyofx Ac Hsu Output for 2L6 pump: approx. 25 l/min Output for 2L6+++ pump: 45 l/min Compressor: 350 l/min Tank capacity: 130 l Mixer capacity: 130 l Mixer inlet height: 118 cm Pump hopper height: 71 cm Pump hopper width: 64 cm Length without worm pump: 165 cm Weight: 360 kg Included in the set: - Mortar hose - Air hose - Spray gun - Hose cleaning ball - 2L6 worm pump

Kondisi: baru, en Kwsdokyt Ulopfx Ac Hsu

Kondisi: bekas, Drilling capacity in steel (diameter): 13 mm Throat depth: 180 mm Drilling stroke: 70 mm Morse taper: 2 MT Table: 230 x 220 mm Spindle speed: 240 - 3800 rpm Motor power: 0.59 kW Column diameter: 70 mm Dimensions: 600 x 350 x 850 mm Weight: 40 kg Features: - V-belt driven bench drill - Drill chuck Kwjdpswplt Iefx Ac Hju - Height-adjustable table

Kondisi: siap digunakan (bekas),