Edge sanding machine

Holzkraft KSO 150 F Basic

Kondisi: baru, Tahun pembuatan: 2022, Bandwidth: 150 mm Belt length: 3,000 mm Table size: 960 mm x 352 mm Auxiliary table: 330 mm x 330 mm Dedpfx Aaogr Ufhovecp Veneer sanding device: yes Oscillation: yes Tilting sanding unit: yes Extraction connection: 120 mm Motor power: 3 kW Machine length: 1,900 mm Machine width: 810 mm Weight: 290 kg

Kondisi: bekas, Panel saw SCM 320cm SiX Meja dorong 320cm, Kemiringan agregat ke dua arah +45 hingga -45 derajat, Kemiringan dan naik-turun mata gergaji diatur secara motorik, Pagar kanan diatur secara motorik hingga 1500mm, Scorer dua sumbu dengan pengaturan elektrik, Motor 7,5KW, kecepatan diatur dengan inverter, Maksimum diameter mata gergaji 550mm, Meja dorong dapat diputar dalam sudut, Mesin bekas, kondisi baik, Dsdpfx Aaszd Uf Tovecp Mesin dilengkapi kontrol baru yang tidak orisinil, Semua pengaturan berfungsi.

Kondisi: baru, Tahun pembuatan: 2026, Crosscut and Mitre Saw, Type: ZS 200 N – 5 kW Motor Includes machine stand, but without saw blade Machine can be tilted using handwheel and worm gear (at the rear) Saw blade diameter: 520 mm, blade bore: 50 mm Saw blade speed: 2800 rpm 400 Volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swiveled): 295 mm Dsdpfx Aaoi Dfidsvjcp Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm Saw can be swiveled to one side to approx. 25° for acute angles and tilted left up to 30° for flat cuts Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: baru, Tahun pembuatan: 2024, Martin T 54 Surface Planer Only with a high-quality surface planer can you truly create perfect foundations. It was precisely with this goal in mind that the T54 was developed. The machine enables you to surface workpieces easily to state-of-the-art standards and reliably apply angular edges. The machine comes standard with a TERSA solid steel cutterblock. The Xplane cutterblock with a shearing cut action is available as an optional extra. Chamfer planing is effortless – thanks to the user-friendly single-handed adjustment, any angle between 90° and 45° can be set quickly. The robust cast iron tables of the T54 provide secure support even for large and heavy workpieces. If you require more support, you can extend both infeed and outfeed tables by 380 mm each, also in cast iron of course. Technical Data Table width: 500 mm Table length: 2840 mm Max. depth of cut: 8 mm Cutterblock: Diameter 125 mm, 5000 rpm, Tersa Z4 Dcjdjpgkmwopfx Aavsp Speed: 5000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Motorized table adjustment Features: T 54 T 5462-a Suvamatic T 541-a Tersa cutterblock with 4 knives Location: Available ex-stock, 54634 Bitburg - Immediately available -

Kondisi: bekas, Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: Penandaan CE, Mesin ini BERUPA mesin bekas, kondisinya sangat baik, dan hanya dimiliki oleh satu pemilik sebelumnya. Mesin dapat dikemas dan siap untuk dikirim dari gudang Penjual di Kroasia dalam waktu 5 hari setelah konfirmasi pesanan! OLIMPIC k 560, komposisi "T-ER2" (40) - Memenuhi peraturan keselamatan Eropa (standar CE) - Kontrol elektronik "StarTouch" dengan layar sentuh 12" dan 100 program kerja yang dapat disesuaikan - Pemosisian elektronik untuk penekan bagian atas - Penyesuaian jarak panel pada pagar pengumpan - Kit perangkat penyalin "Nesting" - Unit anti-perekat "AAR" - Perangkat penyemprot kabut untuk penyelesaian tepi - Perangkat penyemprot kabut untuk tepi yang halus - Unit pengikis lem RC-N - Unit penyikatan "SP-V" 1 - Perangkat "EASY SIZE" - Lampu keramik inframerah - Unit pelapisan lem dengan perangkat pemanasan awal - Wadah lem "SGP" dengan dosis otomatis menggunakan kontrol numerik (NC) sebagai pengganti wadah standar - Alat berlian untuk unit pemotongan awal, tinggi h=64 – no. 2 pisau DATA TEKNIS Kecepatan umpan variabel m/menit 12 - 18 Ketebalan panel mm 8-60 Ketebalan tepi dalam bentuk strip mm 0,4-6 Dsdpjzv Tibsfx Aavecp Ketebalan tepi yang digulung mm 0,4-3 Luas penampang maksimum tepi yang digulung mm² 135 Jarak antara dua panel berurutan mm 600 Panjang panel minimum (lebar minimum 100 mm) mm 140 Panjang tepi minimum dalam bentuk gulungan mm 180 Panjang tepi minimum dalam bentuk strip mm 220 Lebar panel minimum (panjang minimum 210 mm) mm 95 Bukaan untuk rol penyangga panel mm 500 Tinggi meja kerja mm 900 DIMENSI MESIN (untuk pengiriman): Panjang: 5.005 mm Lebar: 1.000 mm Tinggi: 1.950 mm

Kondisi: baru, Model designation Dsdegvqxtspfx Aavecp FALKEN R 1

Tahun pembuatan: 2014, Kondisi: siap digunakan (bekas), 004 Dsdpfx Aaeyg Nu Njvocp

Kondisi: baru, Tahun pembuatan: 2025, Robust steel and grey cast iron construction With fixed milling spindle 3 spindle speeds from 3500 to 10,000 rpm Milling spindle with forward and reverse rotation Large, oversized milling unit made of grey cast iron, mounted directly to the table With extraction hood beneath the worktable for improved dust extraction Solid and precise cast iron table Quick and effortless speed change Powerful 5.0 kW motor Standard arc milling guard Quality made in Italy Equipment details Grey cast iron milling unit Mounted directly to the milling table Milling spindle is mounted high up with precision ball bearings, resulting in minimal bearing load and maximum service life 3 milling speeds from 3500 to 10,000 rpm Powerful motors Equipped with a powerful three-phase motor Milling guard The standard milling guard is factory-equipped for maximum safety with a height-adjustable guide rail and protective sheet Milling fence Precise milling fence with quick adjustment and fine adjustment with scale on the fence jaw Integrated extraction port ensures a clear view Milling table opening A large table opening allows the use of larger panel raising cutters as well as tenoning and slot mortising tools above and below the table Arc milling guard Included as standard Reversible fence jaws Versatile, integrated fence for bridging the tool gap enables safe operation even with narrow workpieces TECHNICAL DATA Dimensions and weights Weight (net) approx. 240kg Dust extraction connection Extraction port diameter: 2 x 120mm Worktable Worktable length: 1945mm — Table height: 900mm Worktable width: 695mm Setup information Required length: 1945mm — Machine body width/depth: 575mm Required width/depth: 920mm — Working area length: 1600mm Note on space requirement: Dimensions allow for max. travel distances or usable lengths. — Working area width/depth: 1600mm Machine body length: 1000mm — Note on working area: Please add the given working area dimensions to the space requirement to determine the recommended free setting-up area for the machine. Electrical data Mains voltage: 400V — Drive motor output: 5.0kW Mains frequency: 50Hz Milling spindle Dcedshp Rcrjpfx Aavop Usable spindle length: 100mm — Spindle speeds: 3500/7000/10,000 rpm Max. spindle protrusion above table: 130mm — Spindle diameter: 30mm Max. milling tool diameter Max. tool diameter (lowerable): 180mm SCOPE OF DELIVERY Arc milling guard Aluminium fence jaws Table extension left and right Extendable workpiece support

Kondisi: bekas, Tahun pembuatan: 2022, FORMAT CIRCULAR SAW WITH TILTING SAW BLADE L'invincibile SI 5 Dcedjz Hb Nbepfx Aavep MAIN FEATURES SLIDING TABLE: HIGHEST CUTTING QUALITY GUARANTEED IN THE LONG TERM TELESCOPIC ARM: AN "INVINCIBLE" SMOOTH GUIDANCE SAW UNIT: FOR A PERFECT CUT Technical Data SI 5 Main saw blade diameter (mm): 550 Panel cuts with extendable fence - with table 3200 mm - with table 3800 mm: 3200x3200, 3800x3200 Saw blade tilting angle (degrees): 46 Maximum cutting height at 90° (mm): 200 Maximum cutting height at 45° (mm): 130 Saw blade speed (rpm): 2500-3500-5000 Scoring blade speed (rpm): 8500 Extraction nozzle diameter: - at the base: 120 mm - at the saw blade guard: 100 mm Main motor power [S6 - 40%] Hz50 kW: 7 Scoring motor power [S6 - 40%] Hz50 kW: 0.9 Cutting width at rip fence (mm): 1600 Standard equipment and accessories: - Optimizer/workflow control app for tablets: SCM Thundercut. The app can be downloaded from the App Store or Play Store on tablets compatible with iPadOS or Android. It can be activated using the QR code supplied with the machine. The app enables: * Management of machine fleet, material, and board stock * Creation and editing of projects; importing projects from major furniture design software (“cpout” file format), importing cut lists * Optimization of cut lists by selecting one or more suggestions from the integrated optimization software in the app * Correct machine setup for each cut, thanks to the simple, intuitive graphics of the 3D sequencer that guides the operator step by step * Printing of barcode labels for part identification via Bluetooth connection to compatible label printers. - 10-year warranty on the sliding table guidance system - Sliding table entirely in aluminum structure with guide system on rolled, hardened, and arch-ground steel guides with large contact surface - Max. saw blade diameter: * up to 450mm with scorer mounted * up to 550mm without scorer mounted - eye-S 15" electronic control, complete with: * 15" touchscreen monitor * Direct control of the following working axes in manual, semi-automatic, automatic, and incremental mode: - Main saw blade height adjustment - Saw unit tilting - Rip fence positioning - Scorer height and lateral adjustment (the scorer is automatically raised to the set position when switched on and lowered when switched off) * Operator assistance functions for performing complex cuts * Storage capability for up to 1000 programs, each with associated image * Storage for up to 1000 different tools, each with associated image * Cut sequence control of preloaded parametric machining programs * Environment for creating and storing new sequenced working programs * Automatic acquisition of working dimensions from the Thundercut app * USB port * Network connection-ready - Auxiliary functions of the electronic control, including: * Determination of the correct stop position on the longitudinal fence for panel processing with tilted saw blade * Determination of the correct stop position on the longitudinal fence for miter cuts with miter fence on the worktable, with or without tilting saw blade - Swiveling control panel above the table - Scoring unit with independent ... (text cut off)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, minimax ti 55es LL - Spindle Moulder The image shows the T 55 i elite s standard version. The professional woodworking machine with tilting spindle and 4 speeds. M Digital: motorized height adjustment and tilting. Robust steel and cast iron construction. Large-dimension cast iron spindle unit, tilting backwards up to -45°. Spindle speeds indicated by LEDs. Fast and simple speed change via eccentric clamping. Reversible spindle rotation (clockwise/counterclockwise). Height and tilt display with 0.1 mm accuracy. Heavy-duty professional fence: fine adjustment via rack-and-pinion, numerical display, aluminum fence jaws, 3-position adjustable for quick repeat settings. Scope of delivery: - Aluminum fence jaws - Curved milling guard - Table extension left and right Model: minimax ti 55es LL Item no.: 5502252 Technical Data Table dimensions: 2500 x 655 mm Sliding table dimensions: -- Usable spindle length: 125 mm Max. tool diameter: 240 mm Max. tool diameter (retractable): 230 mm Max. cutterhead diameter (tenoning): 320 mm Spindle tilting range: 0 to -45 degrees Dcedpfjdqzh Rsx Aavop Speeds: 3500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 5.0 kW Extraction port diameter: 2 x 120 mm