Sistem ekstraksi udara bersih

Holzkraft RLA 125

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, For wood chips and wood dust. Designed for commercial applications. All clean air extraction units in this series are H3 dust-tested, with a residual dust content of less than 0.1 mg/m³. High extraction performance with minimal space requirements Maximum performance in this class Very quiet operation Application area: Clean air extraction units for wood chips and wood dust Designed for commercial use Suitable for all woodworking machines with the corresponding extraction port diameter Can also be used for multiple dust sources High-quality, well-designed construction Robust and compact housing made of galvanized sheet steel Extraction port can be easily converted from left to right, offering flexible use Large maintenance openings Large-capacity, mobile chip containers with clamping bracket and chip collection bag System is delivered completely assembled – ready for immediate use Mobile unit Filter description: Ultra-compact design with maximum filter surface area Filter material made from polyester fleece, aluminized, washable, providing a long service life Filter supplied as standard in antistatic design, BIA category M-tested and approved Filter resistance monitoring via differential pressure gauge, adjustable with warning light on the control panel The fan is installed downstream of the filter Standard features: Innovative locking device for secure container positioning All units of this series H3 dust-tested, residual dust content less than 0.1 mg/m³ Scope of delivery: Metal impeller Maintenance opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter 2 fixed and 2 swivel castors with locking brake Preconfigured for machine monitoring connection (up to 8 machines) and slide valve controls Manual filter cleaning Optional sound pressure silencer available Model: RLA 125 M Item No.: 5131256 Technical Data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal air flow rate: 1095 m³/h Max. air flow rate: [not specified] Negative pressure at nominal flow: [not specified] Lodecnw U Djpfx Aahoak Filter surface area: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from bottom edge of extraction port to floor: 850 mm Weight: 194 kg Location: Arriving in stock at 54634 Bitburg

Kondisi: bekas, Tahun pembuatan: 2018, jam operasional: 3.916 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 667183, berat keseluruhan: 1.154 kg, kapasitas angkut: 210 kg, jangkauan lengan: 3.096 mm, Offered is a KUKA KR210 R3100 Ultra KRC4. 3,916 operating hours Lsdpfx Aajqaitvohoak We also offer a complete overhaul.

Kondisi: baik (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, luas filter: 5,31 m², laju aliran volumetrik: 1.400 m³/jam, tekanan negatif: 2.210 Pa, laju aliran nominal: 884 m³/jam, berat keseluruhan: 205 kg, lebar total: 830 mm, panjang total: 1.100 mm, tinggi total: 1.600 mm, tegangan masuk: 400 V, tingkat kebisingan: 71 dB, diameter nosel ekstraksi: 125 mm, kapasitas tangki: 165 l, Returned item with minor signs of use. Serial number: 125PM2246040001 Year of manufacture: 2022 Dust tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum performance in this class Very quiet operation All models equipped with collision protection Application area Designed for commercial use For all woodworking machines with corresponding extraction port diameter High-quality, well-designed construction Robust and compact housing made of galvanized sheet steel Extraction port easily convertible from left to right, offering flexible use Large service openings Laedpfx Aowgz T Seahjk Oversized, mobile chip containers with clamping brackets and chip collection bags Unit is delivered fully assembled and ready for immediate operation All models are mobile Model RLA 210: Optimal chip distribution in containers due to large filter area Filter description Ultra-compact with maximum filter area Filter material made of polyester fleece, aluminium-coated for increased service life Filter standard in antistatic version, tested and approved to category M-BIA The fan is positioned downstream from the filter If a warranty is specified in the product description and/or scope of delivery, your statutory liability rights towards the seller remain unaffected. Please refer to the warranty terms for the scope, duration, content, and guarantor. No liability for printing errors, mistakes, or incorrect illustration. Technical and visual changes reserved. Images may show optional accessories. Delivery is subject exclusively to our terms and conditions of delivery and payment. Sales are conducted through authorized dealers.

Kondisi: baru, Tahun pembuatan: 2024, tekanan: 8 batang, Mitre adjustment horizontal 15°-90°-15°, infinitely variable. Saw motor 5.50 kW (400 Volt). Saw blade 600 mm. Fence travel range at the rear 180 mm. Working height adjustable from 940 to 1000 mm via adjustable feet. 2 extraction ports (top of hood and bottom). Net weight 600 kg. Dimensions WxDxH 135x140x150 cm. RAL 9007 Grey Aluminium. Turntable made of ground nickel steel. Saw head with recirculating ball guides, designed for high precision, durability, and rigidity. Material can be pre-clamped with low pressure when the hood is open. Hydropneumatic blade feed. Chip flow directed toward extraction hood. Equipment: • Precision under-table circular saw • Mitre angle adjustment 0º/45º/90º/-45º/-60º, stepless • Includes 2 pneumatic clamps (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) Lodpfx Aegwt S Teaheak • Chip extraction system • Spray mist device for air-oil cooling • Air gun with spiral hose • Maintenance unit with pressure reducer included • Ergonomically arranged control panel • Max. cutting height 230 mm • Saw blade 600 mm • Saw blade not included in delivery! Our NC pushing system ensures that your workpieces are positioned at the desired processing point on our UK 600 HA 90°. A gripper clamps the material, and the NC control automatically positions it. Afterwards, clamping and the sawing process are initiated. Positions are pre-programmed into the control system. Once the machine finishes the operation, it automatically moves to the next sawing position. Depending on the workpiece, several parts can be clamped and positioned simultaneously, either stacked or side by side. You are welcome to visit and inspect the desired system at our production or demonstration hall at any time. Please feel free to contact us. Plantec Maschinen GmbH

Kondisi: baik (bekas), Tahun pembuatan: 2001,

Kondisi: baru, Work and Assembly Table Ledpfx Aaekwhwzshsak New machine Year of manufacture: 2023 The ergonomic work and assembly table ErgoPlan EP1 is equipped with a bench top made of selected, solid beech wood. The surface is waxed and polished. The stepless height adjustment under load operates evenly and precisely—even with asymmetrical loading of the tabletop. TECHNICAL DATA Bench top without vises: 1,700 x 640 x 120 mm 2 vise handles: Front vise made of solid cast iron/steel construction, rear vise with robust aluminum box guide (with adjustable guide prism and plastic slide guide) Tabletop thickness: 120 / 60 mm Effective lifting height: 300 mm ErgoPlan construction height: 780 mm Weight of bench top: approx. 95 kg Total weight: approx. 240 kg A mounted rear panel serves as protective cover against shearing and pinching hazards. The lifting unit is integrated into the left lifting column, protected from dirt and damage. Load capacity up to 400 kg Maximum total height: 1,080 mm 2 Bench stops ErgoPlan, consisting of aluminum round bench stops with ball lock, 30 mm, length 200 mm 1 Vertical clamp for securing workpieces from above, with 1 indexing bolt, adjustable for workpiece thicknesses up to 200 mm, 360° swivel range Availability: short-term Stock location: Flörsheim

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 1.154 kg, kapasitas angkut: 210 kg, jangkauan lengan: 3.095 mm, We offer industrial robots from the manufacturer KUKA. The delivery includes the robot arm, control cabinet, and associated cables. The robots originate from a fully operational system and have been professionally dismantled. We perform a function test and inspect the robots. If interested, we offer the opportunity to demonstrate the robots' functionality to ensure they meet your requirements. We grant a 14-day return policy for this. Further warranty services are excluded. Lodpjrlmqkefx Aahsak - Additional option available at extra cost - We are pleased to offer a new feature for our robots: the Siemens S7-1200 Profisafe safety controller. With this controller, you can easily integrate an emergency stop, safety door, and start-stop interface via the Profisafe bus. The controller is fully engineered and programmed, allowing you to implement a simple stand-alone solution with a robot and safety fence. Additionally, we can provide further support during commissioning if required. We maintain an extensive inventory of these robots, and the stated prices are package prices. Discounts are negotiable for larger order quantities. We invite you to contact us again to discuss further details. Sale to commercial customers only.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, jam operasional: 6.000 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 505 mm, jarak lintasan sumbu Y: 350 mm, jarak gerak sumbu Z: 610 mm, kecepatan pemakanan sumbu X: 20.000 m/menit, laju pemakanan gandar Y: 20.000 m/menit, laju pemakanan sumbu Z: 20.000 m/menit, produsen pengendali: Heidenhain, model controller: TNC 426, berat benda kerja (maks.): 300 kg, lebar meja: 380 mm, tinggi meja: 1.004 mm, panjang meja: 920 mm, berat keseluruhan: 250 kg, kecepatan spindel (min.): 50 rpm, kecepatan spindel (maks.): 18.000 rpm, daya motor spindle: 10 W, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, The machine is equipped as follows: Lajdpfx Aajv A Tyqjhsk - Tool holder: SK 30 - Tool changer with 24 positions (automatic tool change) - Coolant system - Spindle cooling - Mist extraction unit - Chip drawer - RENISHAW probe

Tahun pembuatan: 1997, Kondisi: baik (bekas), • Working width (mm): 1300 • CSD system • Cross-belt sanding unit • Longitudinal sanding unit – shoe • Brushing unit Ljdpfxjidi Ivo Aahoak • Ionization

Tahun pembuatan: 2001, Kondisi: hampir baru (bekas), de Ljdefw Nc Uepfx Aahoak