Gergaji bundar HOLZKRAFT sc 3c 26 - Mesin pameran -

HOLZKRAFT sc 3c 26

Kondisi: baru, - New - - Cutting plane directly at the sliding carriage - Heavy-duty cast iron steel construction - Precision-guided format sliding table made of aluminum, anodized as standard - Large-area table extension guided on a telescopic arm, longitudinally adjustable - Extendable aluminum telescopic fence, angle adjustable with professional flip stops - Parallel fence with quick release and fine adjustment - Large worktable made of milled cast iron stays permanently flat - Standard table extension and length extension enable easy handling of larger workpieces - Smooth operation and precise cuts - Equipped with a powerful three-phase motor - The large-dimensioned saw unit made of cast iron is doubly fixed to the cast table, ensuring stability, precision, smooth running, and long service life - Maximum cutting height is achieved even with the scoring unit installed Made in Italy Equipment Details: Dual-pivot saw unit - Large-dimensioned, made of steel/cast iron - Bearings close to the saw blade on both sides for precision, smooth running and long service life - Height and tilt adjustable up to 45° via hand crank - Maximum cutting height is achieved even with the scoring unit installed - Also available with scoring unit Telescopic fence - Extendable telescopic fence up to max. 2,550 mm Rsdpfx Aevyupzshwsp - Angle adjustable - With professional flip stops Aluminum sliding carriage - Equipped with a proven ball contact system - Resistant to dust and dirt due to minimal contact between the ball and trapezoidal rail - 10-year Holzkraft warranty against wear of the guide rails Parallel fence with round bar guide - With fine adjustment and quick release - Sturdy round bar guidance made of ground steel with 45 mm diameter - Standard fold-down for cutting large workpieces Technical data: Dimensions and weights Weight approx. 385 kg Dust extraction connection Extraction port diameter 120 mm Extraction port diameter saw blade guard 60 mm Electrical data Motor power 5.0 kW Connection voltage 400 V Sliding table and table Sliding table length 2,600 mm Sliding table width 270 mm Sliding table height 124 mm Table length 840 mm Table width 560 mm Table height 900 mm Circular saw unit Cutting width with parallel fence 900 mm Max. crosscut width left of saw blade 2,310 mm Edging length 2,600 mm Saw blade tilting 90 - 45 ° Max. cutting height 90° 90 mm Max. cutting height 45° 63 mm (Main) saw blade diameter 315 mm (Main) saw blade speed 4000 rpm Pack unit 1 Scope of delivery: Table extension and table width extension Anodized aluminum format sliding table Aluminum flip stops Parallel fence with round bar guide and fine adjustment Item No. 5504326

Kondisi: baru, Tahun pembuatan: 2026, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, Saw tiltable via handwheel and worm gear (rear) Saw blade diameter: 520 mm, blade bore: 50 mm Blade speed: 2800 rpm 400 volt / 5 kW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90°: 420 mm Redpfek H Ic Ujx Ahwsp Cutting width at 45° (swiveled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm Saw can be swiveled on one side up to approx. 25° for acute angles and tilted to the left up to 30° TCT circular saw blade 520x4.0/2.8 x 50 mm, 60 ATB teeth, negative hook angle, for wood RLH-ST60 measuring length 6.0 m, mounting side: left Length stop / roller conveyor, heavy-duty version, Stop carriage adjustable from operator position via handwheel, electronic-digital measuring display, stop carriage pneumatically clamped, stop flap folds away to the rear, with steel rollers, 60 mm diameter, roller pitch 200 mm, 400 mm roller width, with 4 support legs and connector, total length: 6.7 m Surcharge for digital electronic display unit Type: FIAMA EP6 for 230-volt mains operation, with electric ON/OFF switch and socket. Powerful dark red LED display. Higher precision than the battery-powered crystal display RO-ST60 4.0 m long infeed roller conveyor Mounting side: right Heavy-duty version, steel rollers: 60 mm diameter, roller pitch: 200 mm 400 mm roller width, 3 support legs and connector Location: Ex stock 54634 Bitburg - Immediately available - Image: similar. Machine still in original packaging

Kondisi: baru, Tahun pembuatan: 2026, Max. edge thickness: 3 mm (optionally up to 8 mm) Min./Max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 200 mm Min. workpiece width: approx. 80 mm Feed speed: approx. 10 m/min Ready for operation: approx. 6 min Power consumption: max. approx. 14 kW Electrical connection: 400 V – 3 Ph – 50 Hz Machine dimensions: 5250 x 1230 x 1430 mm (LxWxH) Weight: approx. 1700 kg Jointing unit Whispercut Corner rounding unit radius: R = 2 mm Quick-change system for corner rounding Corner rounding motor with radius: R = 1 mm Multi-radius scraper (R1/R2) Rodpfx Aog Tu Rkehwjp Chassis Release agent spray unit Cleaning agent spray unit Edge protection spray Nesting Pneumatic 3-point adjustment Multifunctional milling unit (R2/R1/Chamfer) Equipment for short workpieces

Kondisi: baru, Tahun pembuatan: 2025, Robust steel and grey cast iron construction With fixed milling spindle 3 spindle speeds from 3500 to 10,000 rpm Milling spindle with forward and reverse rotation Large, oversized milling unit made of grey cast iron, mounted directly to the table With extraction hood beneath the worktable for improved dust extraction Solid and precise cast iron table Quick and effortless speed change Powerful 5.0 kW motor Standard arc milling guard Quality made in Italy Equipment details Grey cast iron milling unit Mounted directly to the milling table Milling spindle is mounted high up with precision ball bearings, resulting in minimal bearing load and maximum service life Rodpfjhp Rcrsx Ahwop 3 milling speeds from 3500 to 10,000 rpm Powerful motors Equipped with a powerful three-phase motor Milling guard The standard milling guard is factory-equipped for maximum safety with a height-adjustable guide rail and protective sheet Milling fence Precise milling fence with quick adjustment and fine adjustment with scale on the fence jaw Integrated extraction port ensures a clear view Milling table opening A large table opening allows the use of larger panel raising cutters as well as tenoning and slot mortising tools above and below the table Arc milling guard Included as standard Reversible fence jaws Versatile, integrated fence for bridging the tool gap enables safe operation even with narrow workpieces TECHNICAL DATA Dimensions and weights Weight (net) approx. 240kg Dust extraction connection Extraction port diameter: 2 x 120mm Worktable Worktable length: 1945mm — Table height: 900mm Worktable width: 695mm Setup information Required length: 1945mm — Machine body width/depth: 575mm Required width/depth: 920mm — Working area length: 1600mm Note on space requirement: Dimensions allow for max. travel distances or usable lengths. — Working area width/depth: 1600mm Machine body length: 1000mm — Note on working area: Please add the given working area dimensions to the space requirement to determine the recommended free setting-up area for the machine. Electrical data Mains voltage: 400V — Drive motor output: 5.0kW Mains frequency: 50Hz Milling spindle Usable spindle length: 100mm — Spindle speeds: 3500/7000/10,000 rpm Max. spindle protrusion above table: 130mm — Spindle diameter: 30mm Max. milling tool diameter Max. tool diameter (lowerable): 180mm SCOPE OF DELIVERY Arc milling guard Aluminium fence jaws Table extension left and right Extendable workpiece support

Kondisi: bekas, Tahun pembuatan: 1990, dengan penyesuaian ketinggian dan kemiringan hidrolik bekas, kondisi baik hingga sangat baik Merek: Panhans Tipe: 690 Tahun pembuatan: 1990 No. mesin: 705 GS-teruji Motor diperkuat 5,5 kW Lebar potong sekitar 1250 mm Redswkvwtspfx Ahwjp Panjang potong sekitar 2700 mm Tinggi potong maks. 145 mm Bisa dimiringkan hingga 45° Pelindung paralelogram Perpanjangan meja sekitar 1000 mm Penyesuaian ketinggian hidrolik Penyesuaian kemiringan hidrolik Koneksi penyedot D 120/80 mm Kebutuhan ruang sekitar 3200 mm x 3500 mm x 1400 mm Berat sekitar 1000 kg Lokasi stok: 97447 Gerolzhofen, bebas muat, tanpa kemasan Penyerahan dalam kondisi apa adanya seperti dilihat, tanpa garansi dan jaminan.

Kondisi: siap digunakan (bekas), A Flott SB 25 pillar drilling machine is being offered for sale, see photos. Rjdpfx Ahoit Rfbewjp

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, penjepit spindle: MK 4, tinggi total: 1.970 mm, kedalaman tenggorokan: 345 mm, kecepatan spindel (maks.): 720 rpm, kecepatan spindel (min.): 80 rpm, 1.) Alzmetall AB4/SV Rentang kecepatan putar: 80-720 rpm Feeder: 0,09/0,16/0,28 mm/putaran Tapper spindle: MK4 Jangkauan (overhang): ca. 345 mm Daya penggerak: ca. 1,8 kW Diameter kolom: ca. Ø 160 mm Stroke pinol bor: ca. 180 mm Redpfx Aeunhtxohwjp Luas meja kerja: ca. 730x560 mm dengan alur-T 14 mm Dimensi: 1000x500x1970 mm Bobot ca. 600 kg Harga: 2.400,- euro netto ditambah PPN. 2.) Gillardon GB30 Rentang kecepatan putar: 60-1600 rpm Tapper spindle: MK3 Jangkauan (overhang): ca. 320 mm Daya penggerak: 1,1/1,6 kW Diameter kolom: ca. Ø 130 mm Stroke pinol bor: ca. 175 mm Luas meja kerja: ca. Ø 500 mm dengan alur-T 14 mm Rentang putar meja: ca. + / – 90 derajat Dimensi: 1000x500x1970 mm Bobot ca. 400 kg

Kondisi: baru, Typ: RP630 Arbeitsbreite: 630 mm Minimale Werkstücklänge: 500 mm Arbeitshöhe/Dicke: 3–110 mm Vorschubgeschwindigkeit: 6–30 m/min Installierte Gesamtleistung: 9,25 kW Aggregatmotor: 7,5 kW Redpfxofhnx Ne Ahwsp Vorschubmotor: 1,5 kW Hubmotor: 0,25 kW Walzendurchmesser: 190 mm Schleifbandmaße: 650 x 1920 mm Betriebsdruck (Druckluft): 0,6 MPa Absaugleistung: 4000 m³/h Transportabmessungen: 1200 x 1750 x 2400 mm Gewicht: 1100 kg

Kondisi: baru, Panel Saw HOLZKRAFT sc 2c - Demonstration machine - Tiltable blade, Parallel fence with fine adjustment ----- Technical Data ----- Extraction port diameter: 120 / 60 mm Table height: 900 mm Speed: 4,000 rpm Max. saw blade diameter: 315 mm Cutting width with parallel fence: 900 mm Rodpfx Asu R Sy Nehwep Cutting height at 90/45°: 100 / 79 mm Cutting length: 1,600 mm Tilting range: 90 - 45 ° Dimensions (LxW): 1,020 x 325 mm Weight: 295 kg - New demonstration machine -

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, daya: 6 kW (8,16 hp), kecepatan rotasi (maks.): 5.000 rpm, kecepatan rotasi (min.): 3.200 rpm, Perlengkapan: rem mesin, Edging circular saw with scorer CASOLIN ASTRA Blade diameter: 400 mm Three speeds: 3200 / 4200 / 5000 rpm Sliding table: 3000 mm Redpfswf R I Nox Ahwsp Main motor: 5.5 kW Motor fitted with electric brake In good working condition, ready for production