Gergaji panel dengan pemuatan otomatis

HOLZMA HPL 430/43/22

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jarak pergerakan sumbu X: 4.600 mm, jarak lintasan sumbu Y: 1.935 mm, jarak gerak sumbu Z: 275 mm, jumlah sumbu: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It features a large working area (X = 4600 mm, Y = 1935 mm, Z = 275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine is equipped with a vacuum system, a conveyor belt for chip removal, and liquid cooling. If you are looking for high-quality CNC machining capabilities, you should consider the Biesse Rover C9.50 machine, which we are offering for sale. Contact us for further information. Worktable and Clamping • 8 ATS panel holders (L = 1525 mm) and 24 sliding rails • Automatic positioning of the panel holders and sliding rails (EPS X-Y) • Pneumatic locking system, divided into 2 working zones in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right), pneumatic system • 4 removable central stops, stroke 140 mm (2 left + 2 right), pneumatic system • Sensor for detection of lowered stops Ijdpfx Ajx D H Hcsa Djid • Pneumatic system for lifting rod supports • 6 lifting rod supports for easy loading (H = 74 mm modules) Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for standard vacuum system Processing Units and Configuration • Configuration C3-A1: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis processing unit • Flange for mounting units on a 5-axis interpolating machining head (units can only be used when the electric spindle is vertical) • Configuration C3-P2: • Additional Z-slide for rear processing units, controlled by an independent Z-axis • 16 vertical and 4 horizontal drilling spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, positioned in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle) Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional equipment • Additional overhauled 5-axis main spindle available • Conveyor belt for removing chips and scrap parts (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles or one electric spindle plus a liquid-cooled drilling head) Note: The technical data and descriptions are taken from the original order confirmation and are for information purposes only; they are not binding.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin planer rata HA 4 Lebar penyerutan 450 mm Panjang meja total 2500 mm Meja masuk 1500 mm Tinggi mesin 820 mm Ketebalan serutan maks. 15 mm Putaran poros pisau 4800 rpm Daya motor 4 HP Berat 660 kg Poros pisau 3 unit Transportasi tersedia dengan biaya tambahan! Karena usia mesin bekas, penjualan kepada pelanggan bisnis dilakukan tanpa garansi. Iiedpfx Aaeinkfne Dod

Kondisi: bekas, Tahun pembuatan: 2018, Delivery time approx. 5 months. Machine from a training facility – EXCELLENT condition, low operating hours (edge banding unit unused). Without tooling. Additional costs for dismantling / delivery / installation and commissioning / training. Includes Maestro 3D and Pro View. MORBIDELLI P200 Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm Edge banding – Made for You This CNC machining center is equipped with a rich selection of edge banding tools to meet all woodworking requirements. MAIN ADVANTAGES - Powerful, with advanced H80C edge-banding unit, drilling spindles with 8,000 rpm, and market-leading spindle technology, offering over 1,000 hours of maintenance-free operation - Superior and generously equipped; suction cups can be positioned and configured using the FLEX worktable to optimally suit requirements - Easier and more intuitive programming thanks to the integrated CAD-CAM module for edge banding technologies "MAESTRO EDGE" Iisdpfx Aaeyuw Sro Dsd - Simple operation: lowered frame for full accessibility to the worktable, integrated control cabinet and vacuum pump, and no safeguarding elements required in the PRO SPACE configuration Base Structure: The base structure is a monolithic construction made from thick-walled steel, reinforced with welded box plates along the entire machine bed, delivering extreme rigidity. The bed design, with a broad base, is key to ensuring long-term precision and stability. The supporting frame features an exceptionally robust, monolithic steel base with heavy ribbing for outstanding stiffness. The exceptionally wide footprint was specially designed to provide stability to the machine, ensuring ongoing precision regardless of working conditions – the machine does not need to be anchored to the floor. The base forms a large and solid mounting surface for the mobile gantry: the machining unit is therefore provided with a balanced, stable, and resilient support, capable of withstanding high loads for superior performance and greater accuracy. The mobile gantry consists of a solid single-piece attached to the base, gliding on prism guides with recirculating ball-bearing carriages of the highest quality. The machining unit is mounted on it and travels along the Y and Z axes on prismatic guides with ball carriages. Movement of the lower mobile unit (X-axis) and the working unit along the bar of the mobile unit (Y-axis) is achieved via helical rack and pinion drive, providing increased tooth engagement for higher acceleration and greater axis speed (X and Y). The specially designed helical gearing ensures reduced wear of mechanical components and lower noise levels. The vertical Z-axis is driven by a recirculating ball screw, ensuring perfect balance under dynamic loads and supporting strong acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage for absolute machining quality.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2024, This FORMAT4 TEMPORA 60.06 glueBox x-motion edge banding machine was manufactured in 2024. It features a rotary table magazine with a 750 mm diameter for edge material from 0.4 to 3 mm, a GlueBox application unit, as well as upper and lower polishing units. The machine is equipped with an advanced x-motion Plus control system featuring a 15' SmartTouch screen and a multifunctional milling unit for precise processing of plastic edging. Contact us for further information about this machine. Additional equipment • Application unit with Teflon coating for 1.5 kg EVA granulate • Upper and lower polishing unit Machine benefits Technical machine advantages • Height adjustment for positioning workpieces: 8-60 mm • Diameter of rotary table magazine: 750 mm for edge material 0.4-3 mm in rolls • Rotary magazine for edge material with ball bearing, plate diameter: 740 mm • GlueBox application unit • Milling unit with two motors: 0.35 kW (1 hp), 12,000 rpm, carbide saw blades, Z 24, D-100x20x3.2 mm, pneumatically tiltable 0°-10° • Upper and lower multifunctional milling units // upper and lower profile sanding machine x-motion plus for processing plastic edges of 2 and 3 mm • Controlled corner unit with 2 motors, motorized adjustment for milling the end grain profiles of the top/bottom edge for edge thicknesses from 0.4-3 mm and feed rates up to 10 m/min • Pre-milling unit with paired diamond-tipped cutters, speed 12,000 rpm, 2x 1.5 kW • Edge and workpiece thickness measurement using Bluetooth technology Additional information Power supply: 3x400V 50/60Hz Chain feed with 2 speeds, feed rates: 10 and 18 m/min Control x-motion Plus control with 15' SmartTouch Iijdpfxsx D Hbto Aa Dod

Tahun pembuatan: 2004, Kondisi: sangat baik (bekas), Four-side planer - Maximum planing width: 23 cm - Maximum planing height: 16 cm - 2 feed rollers integrated into the table - Chrome-plated table - Infinitely variable feed speed adjustment - 2 overhead return rollers positioned in front of the lower head, plus an additional roller device for short workpieces - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW Iiodpfxshlp D Nj Aa Dsd The machine is in very good condition, with little use. Equipped with spiral cutterheads on the bottom, right, and left spindles, and a Tersa knife head on the top spindle.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, en-GB Iiodpfx Aasdqzcxs Dod

Kondisi: bekas, nomor mesin/kendaraan: 006279, Area kerja sumbu X: 3100 mm Area kerja sumbu Y: 1250 mm Permukaan kerja: meja nesting Jumlah sumbu terkontrol: 3 sumbu Jumlah spindle bor: 11 Iiedekw H Ekopfx Aa Ded Jumlah posisi alat: 8

Tahun pembuatan: 1995, Kondisi: baik (bekas), nomor mesin/kendaraan: 044092, Offer 22148 Technical Specifications: - Grinding wheel diameter: approx. 200 mm Iisdpfeiba R Nex Aa Dsd - Grinding wheel width: approx. 25 mm - Grinding wheel bore: approx. 51 mm - Wheel speed: 1450 rpm - Drive: 400 V / 0.7 kW - Space requirement: approx. W 600 x H 400 x D 350 mm - Weight: approx. 30 kg - Console for wall mounting

Kondisi: bekas, Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, Pusat pemesinan CNC Homag Weeke Optimat BHC Venture 3, tahun 2004, dijual! Iedpfx Aajx Ey H Ij Deid

Kondisi: sangat baik (bekas), Panel dividing saw angular system Control: OSI Plus with Optiplanning software No. 2 powered roller conveyors, each approx. 4500 x 2200 mm Lifting table (mm): 4500 x 2200 1st Push feed saw with 5 grippers 90° turning device for panels 1st panel dividing saw, max. cutting width (mm): 4500 Max. saw blade projection (mm): 152 Scoring saw (max. blade diameter): approx. 215 mm Main saw (max. blade diameter / power): 530 mm (30 kW) Variable saw carriage feed (m/min): 1 - 170 Shear for waste material reduction 2nd Push feed saw with 10 grippers 2nd panel dividing saw, max. cutting width (mm): 2200 Max. saw blade projection (mm): 152 Scoring saw (max. blade diameter): approx. 215 mm Main saw (max. blade diameter / power): 530 mm (30 kW) Variable saw carriage feed (m/min): 1 - 170 No. 2 front air-cushion tables (mm: 2200 x 1500) Iodpsukhd Aefx Aa Dsid Automatic outfeed bridge for cut panels “RBO (BIESSE)” model Lifter with 6 stacking positions