Pabrik pemisah panel

HOLZMA HPP 380/43/43 NEW PROFILINE

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 1.300 mm, laju aliran volumetrik: 40.000 m³/jam, panjang total: 7.500 mm, The auction consists of: CEFLA FEV E Dryer: LAMINAR AIR DRYER (ECOGEL E4/5), Type: SP-FEV E - 90 kW CEFLA FEV EU Dryer: AIR KNIFE DRYER (AQUADRY LA/5), Type: SP-FEV EU - 110 kW CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2), Type: SP-FEV RU CEFLA TR 3000 Roller Conveyor CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5), Type: SP-FEV E - 90 kW Note: The spray booth shown in the video is not included in the scope of sale or delivery. TECHNICAL DETAILS Working width: 1300 mm Maximum drying height: 1780 mm (excluding conveyor) Usable passage height: 80 mm Fan capacity: 40,000 m³/h MACHINE DETAILS Control: LCD 5.7" touch panel Ijdoyg Eynepfx Abhehu Dimensions (L x W): 7,500 x 1,783 mm Solvent-laden exhaust air discharged externally: 0-4,000 m³/h EQUIPMENT VS spark-proof intake/recirculation fan CEFLA FEV EU Dryer: AIR KNIFE DRYER (AQUADRY LA/5), Type: SP-FEV EU - 110 kW TECHNICAL DETAILS Working width: 1300 mm Maximum drying height: 1780 mm (excluding conveyor) Usable passage height: 80 mm Fan capacity: 40,000 m³/h MACHINE DETAILS Control: LCD 5.7" touch panel Dimensions (L x W): 7,500 x 1,783 mm Solvent-laden exhaust air discharged externally: 0-4,000 m³/h EQUIPMENT VS spark-proof intake/recirculation fan CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2), Type: SP-FEV RU TECHNICAL DETAILS Usable width: 1,300 mm Usable passage height: 80 mm Maximum tunnel height: 1,780 mm (excluding conveyor) Max. air knife outlet speed: 32.5 m/sec Intake/recirculation fan power: 3 kW Exhaust fan power: 1.5 kW Intake/recirculation fan flow rate: 6,000 m³/h Exhaust fan flow rate: 6,000 m³/h MACHINE DETAILS Control: LCD 5.7" touch panel Dimensions (L x W): 3,000 x 1,783 mm EQUIPMENT TT 4000 rod conveyor with double chain, steel guides and chrome-plated rods CEFLA TR 3000 Roller Conveyor MACHINE DETAILS Total length: 3,000 mm EQUIPMENT Photoelectric barrier for thin panels, thickness 4 mm

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, produsen pengendali: Klöckner-Möller und SPS-Siemens, panjang benda kerja (maks.): 2.500 mm, berat benda kerja (maks.): 50 kg, tinggi tumpukan: 1.200 mm, Auction of a loading and stacking system for the furniture industry! Bargstedt TBH20/ER/25/08/S (Single-side loading station, machine no. 0-280-07-7582) - 1 powered stacking roller conveyor - 1 lift table with powered stacking roller conveyor - 1 vacuum lifting carriage (minimum workpiece dimensions: 280 x 230 mm) - 1 stripping wall - 1 central thickness adjustment for the vacuum carriage - 1 height-adjustable belt conveyor - 1 infeed roller conveyor with inclined carrying rollers - Suction beam (2-lane operation and max. 4 parts in sequence) TECHNICAL DETAILS Stacking height: 1200 mm Stack change time: 35 sec Base capacity max.: 17 cycles/min Max. workpiece weight: 50 kg Max. workpiece length: 2,500 mm MACHINE DETAILS Control: Klöckner-Möller and Siemens PLC Total connected load: 14 kW Compressed air consumption: 81 NL/min Operating pressure: 6 bar Bargstedt TDK 10/25/10 (turning station from longitudinal to transverse, machine no. 0-282-07-7584) TECHNICAL DETAILS Roller diameter: 65 mm Roller pitch: 125 mm Max. workpiece weight: 50 kg Feed rate: infinitely variable from 10 - 50 m/min MACHINE DETAILS Total connected load: 2 kW Compressed air consumption: 27 NL/min Operating pressure: 6 bar Bargstedt TDK 10/25/10 (turning station from transverse to longitudinal, machine no. 0-282-07-7585) TECHNICAL DETAILS Roller diameter: 65 mm Roller pitch: 125 mm Max. workpiece weight: 50 kg Feed rate: infinitely variable from 10 - 50 m/min MACHINE DETAILS Total connected load: 2 kW Compressed air consumption: 1 NL/min Bargstedt TSH20/ER/25/08/S (Single-side stacking station, machine no. 0-281-07-7589) Isdpfxjyg Haie Abhehu - 1 height-adjustable single-panel transport - 1 vacuum lifting carriage (minimum workpiece dimensions: 280 x 230 mm) - 1 central thickness adjustment for the vacuum carriage, settable for panel thickness to take over the panels - 1 lift table with powered stacking roller conveyor - 1 powered stacking roller conveyor, installed behind the stacking station - Suction beam (2-lane operation and max. 4 parts in sequence) TECHNICAL DETAILS Stacking height: 1200 mm Stack change time: 35 sec Base capacity max.: 17 cycles/min Max. workpiece weight: 50 kg Max. workpiece length: 2,500 mm MACHINE DETAILS Control: Klöckner-Möller and Siemens PLC Total connected load: 14 kW Compressed air consumption: 81 NL/min Operating pressure: 6 bar

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2007.10.191, lebar penggilingan: 1.350 mm, panjang sabuk penggiling: 4.800 mm, tinggi benda kerja (maks.): 150 mm, lebar sabuk penghalus: 1.400 mm, Automatic Sander + Dust Extraction Machine TECHNICAL DETAILS Sanding Width: 1,350 mm Working Height: 880 mm Workpiece Thickness: 3 – 150 mm Transport Bed: Continuous conveyor belt Transport Bed Drive: 4.0 kW / Frequency Converter 7.5 kW Feed Speed: 3 – 15 m/min Workpiece Vacuum Clamping System Drive: 7.5 kW Units: 3 x cross sanding, 1 x longitudinal sanding, 1 x brush unit Cross and Longitudinal Sanding Units Cross Sanding Unit – Sanding Belt Dimensions: 4,800 x 150 mm Sanding Belt Speed: 2–20 m/s Drive Power per Cross Sanding Unit: 15 kW Pressure Lamella Belt Dimensions (cross sanding): 4,350 x 140 mm Longitudinal Sanding Unit – Sanding Belt Dimensions: 2,620 x 1,400 mm Sanding Belt Speed (longitudinal sanding): 1.8 – 16 m/s Drive Power (longitudinal sanding): 15 kW Pressure Lamella Belt Dimensions (longitudinal sanding): 1,900 x 1,380 mm Brush Unit Brush Roller Diameter: 120 mm Ihodeyg Exqepfx Abhju Drive Power: 0.75 kW Air Requirements Cross Sanding Units: 91.5 m³/min Longitudinal Sanding Unit: 30.5 m³/min Brushing Device: 18.0 m³/min Transport Belt Blown Air: 13.5 m³/min Workpiece Vacuum Clamping System Exhaust: 40.0 m³/min Total Air Requirement: 193.5 m³/min Total Compressed Air Consumption: 115 m³/h MACHINE DETAILS Total Power Connection: approx. 80 kW Operating Voltage: 400 V Frequency: 50 Hz Main Machine Dimensions Dimensions (L x W x H): 2,900 x 2,300 x 2,200 mm Weight: approx. 7,000 kg Dust Extraction Machine EA 8 – Machine No.: 2007.10.192 Sanding Width: 1,350 mm Working Height: 880 – 920 mm Workpiece Thickness: 3–150 mm Required Air Speed: 20 m/s Air Requirement: 30.5 m³/min Transport Bed Drive: 1.1 kW / Frequency Converter 2.2 kW / 0.75 kW Feed Speed: 3–15 m/min Fan Drive: 5.5 kW Height Adjustment Drive: 0.18 kW Power Connection: 7.0 kW Dimensions (L x W x H): 1,100 x 2,200 x 2,200 mm Weight: 1,900 kg EQUIPMENT - Operator terminal - Dust extraction machine EA 8 - Workpiece vacuum clamping system - Multiple cross and longitudinal sanding units - Brush unit

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, TECHNICAL DETAILS Ihjdpjyg E R Hefx Abhsu Workpiece length: min. 250 - max. 2500 mm Workpiece width: min. 70 - max. 1000 mm Workpiece thickness: min. 4 mm - max. 80 mm Workpiece stacking: max. 2 pieces Vertical Drilling Unit 2V21 HIGH SPEED 7500 Feed stroke (Z-axis): 60 mm Drilling depth: max. 38 mm Rotation direction: clockwise/counter-clockwise Speed: 1,500 - 7,500 rpm, frequency controlled Drive: 2 x 2.7 kW Drill chuck: d = 10 mm Total drill length: 70 mm Max. drill diameter: 35 mm Spindle distance: 32 mm Spindle type: individually controllable Horizontal Drilling Unit 2H4X/1Y 4 drilling spindles each: X-axis each 1 drilling spindle: Y-axis Drilling depth: max. 38 mm Drilling height (Z-axis): 38 mm from workpiece top edge Rotation direction: clockwise/counter-clockwise Speed: 1,500 - 7,500 rpm, frequency controlled Drill chuck: d = 10 mm Total drill length: 70 mm Max. drill diameter: 20 mm Spindle type: individually controllable Grooving Saw Unit N2 X-Y 90° Cutting depth: 30 mm Machining cross-section: max. 70 mm² Speed: 1,500 - 7,500 rpm, frequency controlled Tool diameter: 125 mm Saw blade thickness: max. 5 mm Milling Unit F2-ETP-6 kW Tool holder: for shank diameter d = 25 mm Max. tool diameter: 60 mm Clamping length: min. 65 mm / max. 95 mm Tool weight: max. 2.5 kg Tool change: manual, hydro quick-release system ETP 25 Rotation direction: clockwise/counter-clockwise Speed: 6,000 - 18,000 rpm, steplessly programmable Drive: frequency-controlled three-phase motor Max. power at tool: up to 5/6 kW in continuous/intermittent operation (S1/S6-50%) EQUIPMENT Material feed “IgeL-ROBOT” Bottom processing support Top processing support Vertical drilling unit 2 V 21 HIGH SPEED 7500 Horizontal drilling unit 2H4X/2Y Grooving saw unit N2 X-Y 90 Milling unit F2-ETP-6 KW Barcode reader, manufacturer: Datalogic