Edgebander

HOMAG KDF 530 C

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, en-de Kfedpfxjhh Hwlo Aahoa

Kondisi: baru, Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0-250-87-6869, Drilling head with 8 spindles (V8 SW/32) Kfsdpsvtyc Hefx Aahja Horizontal drilling head with 4 spindles on X axis Horizontal drilling head with 2 spindles on Y axis Grooving saw D=100 mm (X axis direction) Stop cylinder for workpiece positioning Workpiece clamping system Workpiece length: 2500 mm Workpiece thickness: 12-60 mm WOODWOP for the machine WOODWOP IMPORT DXF BASIC (1 license)

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, TREIF PHOENIX-CE ID.NO. 2819 Kfsdpeumbt Ajfx Aahja Treif Phoenix-CE Typ 3040 Würfelschneide-/Schneidmaschine mit zahlreichem zugehörigem Zubehör, wie auf den Bildern zu sehen. Kammermaße: 55 x 17 cm, Höhe 12 cm. Abmessungen: 230 x 110 cm, Höhe 180 cm.

Kondisi: bekas, Slot spindle 1 pc. Number of milling units: 5 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus #2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and completely inspected prior to delivery ----- Technical Data Summary (additional accessories possibly included upon request) Pos. 1: Crosscut Saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment pneumatically controlled in 8 positions, e.g., for edge rounding from above > Laser alignment light for recognizing the saw section Pos. 2: Rounding Unit Horizontal Bottom ----- > Position: horizontal bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm > Spindle speed: 9000 rpm > Max. tool diameter: 130 mm > Axial adjustment mechanically coupled to crosscut saw > Radial adjustment pneumatically controlled on/off NC-controlled length stop ----- > Length: 3500 mm > Electronic length stop Pos. 3: Tenoning and Slotting Spindle ----- > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless, NC-controlled > Spindle speed: 3,500 rpm > Max. tool diameter: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 4: 1st Profiling Spindle (climb and conventional milling) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 7.5 kW Pos. 5: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless, NC-controlled > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash bar guide consisting of: Guide fence on the stop (area of climb-cut spindle), Sash bar support rail from above in the area of vertical right profiling unit and profiling spindle. Pos. 6: Profiling/Milling Unit, Horizontal Top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW Kfsdpfx Aevu Hgheahea > Speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial adjustment: 30 mm, 8 positions > Radial adjustment: 125 mm, 8 positions Pos. 7: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment: 115 mm, 8 positions > Radial adjustment: 110 mm, 8-position turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool diameter: 210 mm > Motor power: 3.0 kW Pos. 8: Profiling/Grooving Unit from Below ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > ...

Kondisi: bekas, Tahun pembuatan: 2014, Used machine Year of manufacture: 2014 Equipment and technical data: Control unit with 10.4" touch color display Extendable workpiece support Motor-driven, positioning-controlled pressure beam Chain feed with 12 m/min feed speed Ball bearing roller support disc, d = 770 mm Double-motor jointing milling unit / 2 x 1.1 kW Edge feed for coil and strip material 0.4 - 10 mm (edge detection via infrared sensor) Teflon-coated glue application unit Pre-melting unit for EVA adhesive Exchangeable glue application unit for EVA Exchangeable glue application unit for PU Motor-driven, positioning-controlled pressure unit Double-motor end trimming saw unit / 2 x 0.50 kW Double-motor multifunction unit for radius, flush, and chamfer milling / 2 x 0.75 kW Corner processing unit Radius scraper Flat scraper Double-motor polishing unit (buffing) Spraying unit for release agent at machine infeed side Kodpfx Aaow Nadtohsfa Spraying unit for cleaning agent before the polishing unit Availability: short notice Location: 65439 Flörsheim

Tahun pembuatan: 2003, Kondisi: baik (bekas), Travel: 560 x 410 x 510 mm, table: 900 x 410 mm, 30-tool magazine, spindle: 12,000 rpm, chip conveyor. Kfjdpfxoiwkhkj Aahoa

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, jam operasional: 730 h, Edgebanding machine Hebrock AKV3005DK-F with jointing, corner rounding, and double scraper units. Very well-maintained machine from a small business, in excellent condition. Touch-screen interface with PLC control for simple operation, allowing storage of up to 12 programs. Edge thickness (roll): approx. 0.4 – 3 mm Workpiece height: approx. 8 – 53 mm Feed speed: approx. 10 m/min Noise reduction hood Extendable workpiece support, special version extendable up to 950 mm Extraction connection: 80 + 140 mm Units/Aggregates: Quick-change glue pot with glue outlet, two glue pots included (one has been used for EVA adhesive, one for PU adhesive; the PU glue pot is nearly new and was only purchased for a specific job). Manual pressure adjustment with SIKO counter Manual infeed fence adjustment with SIKO counter Kedpfjtpn Etsx Aahefa Manual edge thickness adjustment with SIKO counter Joint milling unit with Leitz Whispercut DIA cutters, still sharp Gluing unit with automatic edge feeding for coil material up to 3 mm Pressure zone with 4 rollers End trimming saw Integrated edge scrap container Combination milling unit R2 with pneumatic switching for thin and thick edges Corner rounding unit R2, pneumatically adjustable for thin and thick edges The contour milling unit can also be used in shelf program mode, i.e., only the straight edge is rounded, not the corners. Radius scraper R2, pneumatically retractable Glue joint scraper, pneumatically retractable Hood interlock CE marking Operating manual A video of the running machine can be sent upon request. All turn plates for the milling and scraper units have been renewed or rotated; saws have been sharpened. The machine is ready for immediate use. Only the joint DIA cutters (Whispercut) have not been renewed but are still sharp. Paint damage has been touched up. The Hebrock AKV series is the predecessor of the current K series. The machine has only approx. 730 operating hours (glue pot on), and the frequency inverters have only been powered for approx. 455 hours. The machine is in very good condition; see original photos. Machine dimensions (LxWxH): approx. 5000 x 1400 x 1550 mm Weight: approx. 1550 kg The machine can be demonstrated at our site by appointment. We only offer machines that are ready for demonstration in our warehouse, see “more offers from this seller.”

Kondisi: bekas, Edge bander BRANDT highflex 1440 well equipped, PRE-MILLING cutters glue application pneumatic pre-cut guillotine pressure rollers final trimming saws Kfsdpfx Aaev H D S Sjhoa top-bottom milling unit 2 x corner rounding units profile scraper flat scraper polishing unit the machine is equipped with NC-controlled milling and a pneumatic package max workpiece height 60mm max edge thickness (coil) 3mm feed speed up to 14m/min machine in working order, can be inspected and tested before purchase

Kondisi: baik (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0540/98, Fertigungsnummer: 0540/98. Baujahr: 1998. Kfedpeicbbzjfx Aahsa Presskraft: 400 Tonnen. Hubweg: 300 mm. Hubzahl: 10–40 / min. Stößelverstellung: 300 mm. Einbauhöhe: 700 mm. Tischabmessungen: 1600 x 1300 mm. Eigengewicht: 45 Tonnen. Ständerdurchgang: 1600 mm. Außenmaße: 2 x 3 x 6 Meter. Steuerung: MEAB. Walzenricht- und Zufuhrgerät: iRON RNE 50B / 11. Abwickelhaspel: iRON SA6000, max. Bandbreite 700 mm.

Kondisi: bekas, Holz Her UNO 1303 + PU Ketebalan tepi 0,4 - 3 mm (6 mm) Panel kontrol dengan sakelar seleksi untuk pengaturan unit Majalah tepi otomatis untuk bahan roll dan strip Stasiun aplikasi lem: cartridge + pengeleman PU Tinggi benda kerja 6-55 mm Kfedpfxoxlz Nzs Aahoa Unit penekan pneumatik Unit pemotong untuk bahan roll dan strip hingga ketebalan tepi 3 mm (6 mm) Dengan pengaturan sudut potong dari 0-10° Unit frais: frais rata, frais radius, frais chamfer - 15° Unit scraping untuk chamfer dan radius Unit scraping permukaan – finishing Mesin telah DICEK dalam KONDISI SANGAT BAIK dari bengkel yang sangat terawat Siap kirim dari stok Lieboch