AGREGAT KIRI BAWAH OTOMATIS

HOMAG

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, panjang pemotongan (maks.): 3.800 mm, Panel saw from 1996. The HOMAG HPL 11/38/22 features a cutting length and width of 3800 mm and a lift table with a payload capacity of 7 tonnes. It is equipped with 7 clamps and an automatic height control system for efficient panel feed. If you are looking for high-quality panel cutting solutions, consider the HOMAG HPL 11/38/22 machine we have for sale. Please contact us for further details. • Cutting width (programmable pusher travel): 3800 mm • Clamps: 7 units (with 2 optional additional clamps at positions 150/350) • Clamp spacings: 50 / 250 / 450 / 850 / 1550 / 2250 / 3050 mm (measured from the squaring fence to the clamp center) • Air-cushion tables (in front of the machine): • 1x at the squaring fence: 2810 x 650 mm • 2x: 2160 x 650 mm Additional Equipment • Lift table for batch panel feeding: • Dimensions: 3800 x 2200 mm • Payload: 7 tonnes • Stack height (floor level): max. 680 mm • Stack height (pit installation): max. 880 mm • Automatic height control via control panel • Heavy-duty roller conveyors (2x): Type HER 38/22 L, non-driven, longitudinal transport, forklift slots, 18 rollers, height 330 mm, roller diameter 108 mm, spacing 198.5 mm • Roller conveyor drive units (2x): Type 38/22, speed 12 m/min • Stacking station: LIFT-EX Type HAZ Version A for stacking of cut formats • Label printing system Podpfx Aley Hr Nkj Iopr

Kondisi: bekas, nomor mesin/kendaraan: 007956, Position 1: Transfer station HOMAG-PROFI KFL 350/11/A3/WZ14 Position 2: Single-sided edge banding machine HOMAG-PROFI KFL 350/11/A3/WZ14 Pedpfxjwuudmo Al Iepr Position 3: Panel return system HOMAG-PROFI KFL 350/11/A3/WZ14

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, Edge banding machine from 2016. The HOMAG KAL 370 features a steplessly adjustable feed rate of 18-20 m/min and is suitable for workpiece thicknesses of 8 to 60 mm. It is equipped with advanced gluing and milling units as well as a comprehensive software package for efficient operation. If you are looking for a high-quality edge banding machine, you should consider the HOMAG KAL 370, which we have for sale. Contact us for further details. • Feed speed: Steplessly adjustable 18-20 m/min • Fixed stop side: Left • Workpiece thickness: 8-60 mm • Workpiece protrusion: 30 mm • Through-feed installation: Pre-installation for Boomerang TFU140 • Feed interlock: Available • Equipment packages: Future Package 5; Foil/high-gloss package (bottom) • Infeed features: Sliding carriage; Workpiece alignment at infeed; Workpiece support with roller conveyor; Infeed interlock • Workpiece transport: Transport device; Upper pressure unit • Cleaning/preparation: Separating agent spray unit (top/bottom) • Jointing/milling: Joint trimming unit; I-System DIA joint cutter set WD60; Workpiece preheating (up to 60 mm thick) • Gluing: Gluing unit; Preparation for Airtec activation unit; Adhesive application system; Application units QA60 and PU60; Pressure vessel for PU application unit • Magazine/pressing: Edge magazine; Pressure zone • Spraying: Lubricant spray system (top, bottom, side) • Trimming/milling: Cut-off unit HL81 (angled/straight, 0.8 kW); Pneumatic adjustment for flush/overhang trimming; Pre-milling unit BF10; HM cutter set (straight); Profile milling unit FK11 • Tooling/changeover: I interchangeable head system (automatic adjustment/FK); I-DIA radius cutter set (for FK, R=2 mm, Z=4); Standard milling unit SF21; Multiprofile scraper MN21 (automatic); Profile knife set for MN20/21 • Additional units: Joint pull-off blade FA20 BASIC; Automatic sensing for joint FA20; Buffing unit FA06 (top/bottom); Powercontrol PC23 Powertouch • Control/software: Software package WoodCommander; antenna sequence control; machine data acquisition and evaluation; error diagnosis; teleservicenet soft • System/networking: Emergency stop interlock; network connection (Ethernet); manual control for setup mode; Language: German • Documentation: On data carrier and in print Additional equipment Ppjdpfey Hrtpox Al Ijr • Boomerang return system TFU140/20/08-Optimat • Workpiece identification (sensor-based) • Basic outfeed return • CE for cells (systems)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, jumlah sumbu: 4, This 4-axis HOMAG BAZ 211/40K was manufactured in 2010. It is equipped with a vacuum clamping system featuring multiple configurations, a high-performance vacuum pump, and a Flex5+ saw, milling, and drilling unit. The machine includes three tool changers and an edge banding package for expanded processing capabilities. If you are looking for a high-quality CNC woodworking machine, consider the HOMAG BAZ 211/40K we are offering for sale. Contact us for further details. • Vacuum clamping system: 8x 120x50 mm (0/90°) console table • Rotatable vacuum clamping system: 8x 125x75 mm (360°) console table • Vacuum pump: Reinforced 100/140 m³/h Ppodpfx Ajy Hrr Eel Ior • Aggregates: Flex5+ saw, milling, and drilling unit for tool changers • Tool changers: 3x tool holders for Flex5+ (tool changer) • Edge banding package: Power EDGE 360° for BAZ 211/311 Venture • Edge processing: workpiece edge blow-off nozzle • Milling/Scraping: combined flush-milling and scraper unit (WD 60 mm) • Profile knives: 2x for scraper unit • Radius milling head: 2x WPL radius milling heads • Material handling: tool transfer station for B200/300/K • Software: upgraded to woodWOP 6.0

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, de Pjdpfexvy Uksx Al Iopr

Kondisi: baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, CNC machining center with edge banding unit and corresponding finishing units. Technical specifications: Working dimensions: + X-axis: 3,050 mm with single setup + X-axis: 900 mm with pendulum operation + Y-axis: Milling up to 1,220 mm with 25 mm tool diameter Edgebanding up to 1,220 mm Podpfx Aoy Hrh Tel Ijpr All aggregates up to 1,170 mm Workpiece thickness up to 60 mm with standard clamps 6 workpiece consoles for tubeless vacuum system 4 workpiece stops in X direction, integrated in the machine frame, for large workpieces 6 workpiece stops in X direction, 1 each integrated in the console 1 workpiece stop each left and right in Y direction 4 lifting rails for easy positioning of heavy workpieces LED setup assistance for easy positioning of vacuum cups and consoles Aggregate equipment: Milling spindle 11 kW, HSK F63 Speed 0 – 18,000 rpm Liquid cooling C-axis for use of processing units, with torque transmission and 3-point support 12-position tool changer magazine Drilling head with 17 vertical spindles Spindle spacing 32 mm Air nozzle for cleaning workpiece edges Interchangeable edgebanding unit for 360-degree edge banding from the butt joint. With single-roll magazine With granulate feed Edging thickness up to 3 mm Adapter units: + Horizontal boring head, cross type + Lock case mortising unit, 2 outputs + Saw unit 90 degrees + Swiveling drilling/sawing unit + Combination unit for radius milling/scraping Control: POWERCONTROL with: WOOD WOP AV license WOODWOP

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, lebar benda kerja (maks.): 60 mm, panjang produk (maks.): 7.845 mm, Edge banding machine from 2012. The HOMAG KAL211 Edition 2264 offers a working height of 950 mm and is suitable for workpiece thicknesses from 8 mm to 60 mm. It is equipped with various units, such as a gluing unit, joint trimming unit, and pre-milling unit, enhancing its versatility. If you are looking for a high-quality edge banding machine, consider the HOMAG KAL211 Edition 2264, which we offer for sale. Contact us for further details on this machine. • Feed speed: 18-25 m/min • Maximum feed speed (with FK11 unit): 20 m/min • Working height: 950 mm • Pneumatic connection: 6 bar • Total length: 7,845 mm • Minimum workpiece width: • 60 mm for 12-22 mm thickness • 105 mm for 23-40 mm thickness • Workpiece thickness: 8-60 mm (expandable with options) • Edge material thickness: • Rolls: 0.3-3 mm • Strips: 0.4-20 mm • Electrical: • Supply voltage: 400 V / 3 Ph / 50 Hz Psdpfx Aljy Hi Eio Ispr • Total current rating: 67 A • Control voltage: 24 V • Control system: powerControl PC22 (Windows XP based) • Software: woodCommander; woodScout (option); Schuler MDE Basic • Units/Aggregates: • Release agent spraying device (top/bottom) • Joint trimming unit (2 motors, 4 kW each) • Gluing unit A20 with 2 rollers (Quickmelt system) • Application unit PU65 (interchangeable, Teflon coated) • Preparation for laserTec-activation unit • End trimming unit HL84 (0.8 kW) • Pre-milling unit BF10 (1.5 kW) • Multi-profile forming unit FK11 (manual adjustment) • Profile scraper PN10 • Finishing unit (glue line scraper + buffing unit) • Cleaning agent spraying device Additional Equipment: • Automation package (No. 4013): • Automatic adjustment of infeed fence and pressure zone • Electronic height adjustment for top pressure beam

Kondisi: bekas, Fungsionalitas: belum diuji, Ferwood Code: RU0003034 - Manufacturer Code: 2-055-05-3361 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service; please contact us. Pjdpfev D Iccjx Al Ijpr

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Sasis untuk mesin pelapis tepi Sudah terpasang pada Homag Edgeteq S-200, KDF 1130 FC (1100kg). Namun, kemungkinan juga cocok untuk mesin lain, seperti Brandt (mungkin perlu sedikit penyesuaian). Panjang profil U sekitar 1130 mm Tinggi keseluruhan termasuk roda sekitar 150 mm 4 roda baja kokoh sebagai roda putar dengan nipple pelumas 2 rem pengunci 2 pelat penambah untuk penyesuaian ketinggian Ppsdpfx Alsw S Dmde Ier Mesin dapat didemonstrasikan langsung di tempat kami setelah membuat janji. Kami hanya menawarkan mesin yang siap untuk didemonstrasikan di gudang kami, lihat juga "penawaran lain dari penjual ini".

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, jam operasional: 3.000 h, 5-axis CNC portal machine; Console table with 6 movable consoles, each with 2 suction cups, side and longitudinal stops, LED position display for vacuum suction cups Venture 316 Future Package 10 pcs. lift rails, connection for power clamp, vacuum connection for templates WORKPIECE PARAMETERS: – Maximum workpiece length: All units single: 3300 mm; pendulum max. 1740 mm Tool diameter 25 mm: single 3475 mm; pendulum max. 1915 mm – Workpiece width: Front stop: 950 mm all units / 1050 mm with tool diameter 25 mm Rear stop: up to 1400 mm / 1550 mm – Workpiece thickness: – Max. 250 mm including clamping devices – Up to max. 60 mm with standard clamp SAFETY AND PROTECTIVE DEVICES: EC conformity; SAFETY FENCING ON THE RIGHT WITH DOOR left and rear: wall installation! Support configuration: 10 kW Drive5C spindle and 14-position tool changer (carousel) + 9-position linear changer on the side Drilling head with 16 spindles (V12/H4/S0/90°) AGGREGATE INTERFACE DRIVE5C+ TOOL MEASURING PROBE TOOL CHANGER SOFTWARE FOR POSITION MEASUREMENT CNC COORDINATE ROTATION TOOL HANDOVER STATION COOLANT TANK FOR MACHINING SPINDLE VACUUM PUMP 300/360 M3/H Powerclamp pneumatic package Control: POWERCONTROL PC85 with POWERTOUCH control system; IPC POWERPACK, OPERATING COLUMN FOR PROGRAM START; CAMERA SYSTEM WITH TABLET PC WOODWOP CAD/CAM INTERFACE STANDARD DOCUMENTATION AND CONTROL TEXTS: GERMAN Delivery exclusively includes the tools and HSK holders shown! Pedpfx Asy E Npfel Iopr

Kondisi: baik (bekas), Tahun pembuatan: 1999, nomor mesin/kendaraan: 0-200-21-3286, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, arus masuk: 56 A, jenis arus masuk: tiga fasa, ketebalan tepi (maks.): 20 mm, Perlengkapan: Penandaan CE, Used single-sided HOMAG edge banding machine, for straight edges; suitable for jointing, gluing and post-processing of various edge materials. Fixed fence on the right side. NOTE: Fully operational machine SPECIFICATION / EQUIPMENT: Base machine with 80 mm wide transport chain as workpiece feed system, - Max. workpiece thickness: 60 mm - Motorized height-adjustable top pressure - Workpiece support with rollers, movable on rails - Glue pot lift-off when feed is stopped - Glue roller clamping in front of workpiece rear edge - (Remote) manual control for easy machine setup - Adjustable infeed fence via NC axis - Jointing unit for conventional/climb milling, 2x3.5kW, automatically actuated GLUING SECTION A20, consisting of: - QA34 glue application unit - Pre-melter for EVA adhesive - Edge magazine, min. 0.4 mm to max. 20 mm edge thickness - Pressure zone with automatic horizontal adjustment (NC) to edge thickness, 1 powered, 6 non-powered pressure rollers POST-PROCESSING SECTION: - HL81 end trimming unit, 2 motors (front/rear edge) with motorized fine adjustment of trim stops - Pre-/flush milling unit 1.5 kW, top/bottom - FK13 contour milling unit (corner rounding), 2 motors (top/bottom) with automatic 8-position tool changer with multiple interchangeable heads - MN11 profile scraper, top/bottom, with automatic turret positioning - FA10 flat scraper, top/bottom, (version with 3 tracing rollers) Ppedsy H Hzbepfx Al Ijr - KS10 belt sanding unit, straight edges, with oscillation - Buffing unit, top/bottom CONTROL: HOMATIC NC 21

Kondisi: bekas, nomor mesin/kendaraan: 008402, de-1 Pjdeygtbmepfx Al Ispr

Kondisi: bekas, Tahun pembuatan: 2018, jam operasional: 7.610 h, tinggi total: 1.650 mm, panjang total: 4.400 mm, lebar total: 1.000 mm, Colour: Grey Weight: 2,500 kg Price: On request - Special features: └ Description: Machine currently has a defect that needs to be rectified - Year of manufacture: 2018 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: - Operating hours: 7,610 - Number of units [pcs]: 9 └ 1st unit type: Pre-milling unit - Tools included: Yes └ 2nd unit type: Glue application unit Psdpfsy Ewv Tex Al Iopr └ 3rd unit type: Pressure rollers - Tools included: Yes └ 4th unit type: Cross-cutting unit - Tools included: Yes └ 5th unit type: Coarse milling unit - Tools included: Yes └ 6th unit type: Radius scraping unit - Tools included: Yes └ 7th unit type: Corner rounding unit - Tools included: Yes └ 8th unit type: Flat scraping unit - Tools included: Yes └ 9th unit type: Brushing unit - Tools included: Yes - Voltage [V]: 400 - Power consumption [A]: 10.3 - Fuse [A]: 16 - Transport dimensions: 4,400mm x 1,000mm x 1,650mm (L x W x H) - Transport weight [kg]: 2,500 kg - Number of transport packages [pcs]: 1 Financial Information: VAT: The listed price is exclusive of VAT VAT/Margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial equipment Yorick Diebels